Storage Performance – PCMark Vantage

PCMark Vantage is the latest system benchmark available from Futuremark, and is specific to Windows Vista and now Windows 7. Similar to the venerable PCMark05 in its makeup, Vantage modernizes the criteria and test methodology to reflect what users may encounter when running the new Windows OS and current applications. The total HDD benchmark is roughly 87% reads and 13% writes in nature. We run each test five times per drive, producing a median score that we use for comparison in our charts. We enable AHCI settings for each board and downloaded the latest Win7 driver set from Intel.



The ASUS scores slightly higher on the total suite score due to a stronger performance in the Media Center test. Otherwise, the two boards perform almost identically in the other test suites. There are no real surprises here since both boards utilized the same ICH10R and driver set on an identical drive image.

Networking Performance

The Windows 2000 Driver Development Kit (DDK) includes a useful LAN testing utility called NTttcp. We use the NTttcp tool to test Ethernet throughput and the CPU utilization of the various Ethernet Controllers used on the motherboards. We set up one machine as the server, in this test an Intel system with an Intel CSA Gigabit LAN connection. Intel CSA has a reputation for providing fast throughput and is a logical choice for our Gigabit LAN server.

On the server side, we use the following Command Line as suggested by the VIA white paper on LAN testing:

Ntttcpr -m 4,0,‹server IP› -a 4 -l 256000 -n 30000

On the client side (the motherboard under test), we use the following Command Line:

Ntttcps -m 4,0,‹client IP› -a 4 -l 256000 -n 30000

At the conclusion of the test, we capture the throughput and CPU utilization figures from the client screen.



Since both motherboards utilize the same Realtek RTL8111C controller, the results are equal for the most part.

First Thoughts

We are actually at a loss for words to be honest. At a $169.99 price tag, we expected a motherboard lacking in features compared to the more expensive X58 offerings, with average performance at best. MSI has now shown us that you do not need to spend $250~$300 for an X58 motherboard to get a full feature set along with well balanced performance. The X58M is perfectly happy operating as the foundation for a high-end SOHO SFF media system or a high performance SFF gaming system. With the right case setup, this motherboard can be the centerpiece in a killer LAN Party system - or in our case, the crown jewel for a single home system that can do everything from media creation to gaming better than any other alternative CPU/chipset combination we can think of.

Based on our original experience with the MSI X58 Eclipse and Platinum motherboards, we really did not expect much in the way of improvements in clocking or performance. You can imagine our surprise after using this board for the last two weeks. It is has proven to be a very stable motherboard with excellent performance. Do you want to boot your latest 920 D0 at 21x230? No problem, the board handles it without breaking a sweat. Do you need to overclock while keeping your CPU core Vid at less than 1.00V in load conditions? Once again, this board will handle that requirement with aplomb and offers a multitude of options to accomplish it.

Of course, not every board is perfect and this one does have a couple items that bother us. The first problem is that S3 resume does not work properly with Bclk settings above ~150 at this time. MSI is working diligently to remedy that situation but by now, this is something any X58 motherboard should handle with ease. We do not care for the placement of the two chassis fan headers as most double slot video cards will create problems with their usage. They are usable (barely at times), but it requires some forethought when installing the board and components. In addition, both of these fan headers lack proper speed and temperature controls and for a uATX board targeted to the SFF market, this is something we do not like. The PWM area requires proper air cooling in heavy overclock situations as MSI did not provide a heatsink for passive cooling.

The board tends to slightly overvolt VTT and at times VDimm, but load voltages are correct on our review sample. There are also some inconsistencies in the BIOS feature descriptions and we would have preferred tighter tRFC timings at DDR3-1333/DDR3-1600 speeds. On the pure wish list, we would like to see an additional two USB headers on the I/O panel and a nice black PCB to match the blue/black design scheme on the various connectors and slots. The overclocking Bclk switch should be replaced with a reset button or ideally both a reset button and clear CMOS button.  We understand certain sacrifices have to be made to meet this price point and so our list of potential improvements does not concern us greatly, except for the S3 resume problem.

All that aside, we think MSI has a winner here. The price is right, the quality is great, performance is terrific, and the feature set (CrossFire/SLI) matches that of boards costing up to a hundred dollars more. We have no problem recommending the MSI X58M at this point and look forward to seeing it again in our roundup.

The First Results
Comments Locked

25 Comments

View All Comments

  • harbin - Friday, July 24, 2009 - link

    This mobo turbo throttles, if that gets fixed, I'll buy one for sure.
  • kenco - Friday, July 17, 2009 - link

    I think it's brilliant that the holes are there to use s775 coolers. I have a Scythe Ninja (rev.B iirc) sat doing nothing. Do you reckon this'll be okay for a spot of overclocking? I'm a bit loathe to try on the retail hsf as I can see a wall (temperatures) being hit fairly quickly. Also - would Artic Ceramique work okay to replace the gunk under the chipset heatsink? The only other thing that concerns me is there's no pwm heatsink.. and there are no holes around there either. Would thermal tape be enough to transfer heat to a few dinky little heatsinks?

    A lorra questions - hope someone's tried one or more already and had success :)
  • RagingDragon - Wednesday, July 22, 2009 - link

    It has mounting holes for a PWM heatsink - according to the article this board is compatible with the PWM heatsinks used on MSI's full size X58 boards.
  • AsYouWish - Sunday, June 14, 2009 - link

    On page 2 of your article you list the bios revsion on this board as 3.1. I have recently purchased the MSI X58M and no voltage adjustment options are available and the board overvolts the cpu terribly on overclocks (1.35+ volts). The only bios that I see available on the MSI website is revision 1.2 and that is the version that shipped on the board. I am curious as to where you acquired 3.1 bios.
  • Tomzi - Wednesday, June 17, 2009 - link

    I can see BIOS 3.0 on MSI support. Try this, maybe it helps.

    http://www.msi.com/index.php?func=downloaddetail&a...">http://www.msi.com/index.php?func=downl...bios&...
  • AsYouWish - Thursday, June 18, 2009 - link

    Thanks for replying, the 3.0 bios did show up the day after I wrote that (or that's when I noticed they were there). I'm starting to think that I'm missing something here. I updated to the 3.0 and still have the same issue.
  • AsYouWish - Friday, June 19, 2009 - link

    Just to assure anyone considering this board, silly mistake on my part. I do have all the control over voltages that I require. This is what I get for taking a year off from pc building and tweaking.
  • wetwareinterface - Thursday, May 28, 2009 - link

    Too many reviews of Gigabyte products or a brain fart probably but on page 1 you state it has "RTL8111C Gigabyte LAN". You do mean Gigabit lan correct?

    Otherwise interesting article and an interesting budget core I-7 motherboard (never thought I'd be saying that this year).
  • ICBM - Tuesday, May 26, 2009 - link

    It is a shame SiS is not making any chipsets for Core i7. I assume they do not have a license. Talk about the perfect chance!

    I would think it would be similar to the situation when the i850 was Intel's main chipset, and before i865/875. SiS really offered some great alternative solutions, and motherboard makers actually offered decent motherboards based on their chipsets.

    Competition is greatly needed in the Core i7 chipset market(or lack there of).

    Just a thought....wish.
  • AssBall - Monday, May 25, 2009 - link

    Does MSI have any plans for a board like this with integrated video? Getting a uATX board without integrated video seems strange. I'd love to see some cheap x58 with intel IGP.

Log in

Don't have an account? Sign up now