Intel's Core 2 Extreme QX9770 Preview - Updated
by Anand Lal Shimpi on November 19, 2007 12:02 AM EST- Posted in
- CPUs
Is 3.2GHz Faster than 3.0GHz?
As you've undoubtedly seen by now, Intel still remains unchallenged in the high end processor market, especially when it comes to quad-core CPUs. AMD's Phenom will only ship at a maximum of 2.3GHz this year, and 3.0GHz won't happen until after the QX9770 launches next year in all likelihood.
With no real competition from AMD, the biggest challenge the QX9770 faces comes from Intel. The graph below should give you a quick idea of how obsolete the QX9770 will make the QX9650 (we used the same test configuration from our Phenom article for these numbers):
The performance gains are impressive, given that we're only looking at a 6.6% increase in clock speed. The 1600MHz FSB does seem to do a bit, giving us 7 - 8% performance boosts in a couple of instances.
Without knowing the price of the QX9770 it's tough to say whether or not you're getting what you pay for. Generally these Extreme parts aren't worth their asking prices, but if you're wondering where peak performance will be early next year, the QX9770 should give you a good indication.
Facebook
Twitter
RSS
27 Comments
View All Comments
cVEcOC - Monday, December 3, 2007 - link
hello for Overclocking this new cpu i can up to 4.5ghz like to QX9650 at 1600FSB?nemrod - Wednesday, November 21, 2007 - link
I really don't understand. You've check X48 chipset:http://www.anandtech.com/cpuchipsets/showdoc.aspx?...">http://www.anandtech.com/cpuchipsets/showdoc.aspx?...
with a Intel Core 2 Quad QX9650
You have had to problem to run the cpu at 4GHz 400MHz x 10
And now you say that a cpu at 400MHz x 8 is not stable? And you assume extra power is due to the cpu...
Have you try to measure the power of the cpu? (like there for example:
http://www.matbe.com/articles/lire/521/intel-qx965...">http://www.matbe.com/articles/lire/521/...45nm-12-... not the QX9770 yet on this site)
Or at least could you slower the multiplier keeping 400 FSB and doing the inverse droping fsb increasing the multiplier, in order to have the same cpu frequency but a differnt fsb on board to see if it's really related to the cpu?
nemrod - Wednesday, November 21, 2007 - link
qx9650http://www.matbe.com/articles/lire/521/intel-qx965...">http://www.matbe.com/articles/lire/521/...45nm-12-...
CPU power measure
idle: 12W
full: 63.6W
so a change of 52.6W
http://enthusiast.hardocp.com/article.html?art=MTQ...">http://enthusiast.hardocp.com/article.html?art=MTQ...
power measure behind the psu, with "small system"
idle:82W
full:135W
so a change of 53W
http://techreport.com/articles.x/13470/15">http://techreport.com/articles.x/13470/15
idle: 160W
full: 215W
so a change of 55W
But in your mesurement
idle:151W
full:192
a change of only 41W!
nemrod - Wednesday, November 21, 2007 - link
http://www.sharkyextreme.com/hardware/cpu/article....">http://www.sharkyextreme.com/hardware/cpu/article....power load of QX6770 below QX6700 and QX6850
On this one same kind of result than you
http://techgage.com/print/intel_core_2_extreme_qx9...">http://techgage.com/print/intel_core_2_extreme_qx9...
look like there is some differencies between the ES
nemrod - Wednesday, November 21, 2007 - link
or motherboards...[quote]
Updated: We're working with Intel on the source of the thermal problems we mentioned in this review, it looks like the culprit was our ASUS P5E3 Deluxe motherboard. ASUS has since released an updated BIOS intended to address the power consumption issues we faced, you can read more about it here while we continue with our testing.
[/quote]
magreen - Tuesday, November 20, 2007 - link
Was Anand being facetious with this conclusion? A 6.6% increase in clockspeed gives a 7-8% increase in performance? That means the 1600MHz FSB did almost nothing to improve performance! We're talking a gain of 1% due to the FSB increase? Not to mention that 1% is probably within the margin of error for those benchmarks! What gives?
Toferman - Tuesday, November 20, 2007 - link
Guys,The CPUZ screenshot shows too much Voltage for stock speed. Change it to Default, and your temps shouldn't be so high.
:)
Tofer
gochichi - Tuesday, November 20, 2007 - link
It seems like that kind of FSB to start off with is not worth it. It seems to me that Intel is actually trying to curtail the vast overclockability of it's lineup in the future.I imagine they would love to reestablish some reason to spend $600+ on a CPU. Seems like starting at a low factory FSB makes overclocking too easy.
I feel more and more so every passing day that I made a big mistake by not getting a Q6600 when they came out. If the word on the street is right, you can get those up to a steady 3.0Ghz for under three bills. That performance at that price is going to be hard to beat even by Intel it looks like.
supremelaw - Monday, November 19, 2007 - link
http://www.supremelaw.org/systems/heatsinks/warnin...">http://www.supremelaw.org/systems/heatsinks/warnin...Sincerely yours,
/s/ Paul Andrew Mitchell
Webmaster, Supreme Law Library
http://www.supremelaw.org/">http://www.supremelaw.org/
Etern205 - Monday, November 19, 2007 - link
You must study law, well then good for you.Just don't abuse it!