Cooling Hardware
The first major change that Lian Li implemented in the PC-60 Plus was the cooling system. Instead of the two 60mm fans up front, Lian Li has decided to use a 120mm fan that will increase air flow while decreasing sound output. The larger fan will help cool the HDDs mounted in the drive cage much better than the 60mm fans did on the original PC-60.
The PC-60 Plus also includes the standard 80mm fan that we saw in the original PC-60 as well as the PC-6070. There is also a change here. Lian Li has included a chrome-finished air duct that, when secured to the back mounted intake fan, guides air directly at the CPU heat sink fan to provide it with fresh cool air.
This feature may make some of our hearts stop out of fear of air flow gone wrong, but Lian Li has implemented other features to equalize air pressure inside the case. There is an 80mm exhaust fan mounted at the top of the case where we saw the vent on the outside. This fan will help move rising warm air out of the case.
The second exhaust is through an included 120mm blower module, which can be mounted at the space beside the expansion slots. This blower will help move warm air away from the video card as well as pull air from the rest of the case.
The last piece of hardware that will help air circulation is the power supply. A unit with a few fans to help keep the air flowing will do a system with higher heat outputs much better than a cheap single fan power supply. Lian Li has included a PSU fan cover to direct air to the side of the case to prevent recirculation through the back mounted fan.
Facebook
Twitter
RSS
43 Comments
View All Comments
kevykev - Tuesday, July 26, 2005 - link
I used to be a huge Lian-Li fan but their cases are still stuck in the past. It is nearly impossible to find a mid-tower that actually includes 120mm fans for BOTH the intake and the exhaust. I mean come on... between required active chipset cooling, 80mm fans in PSU's usually, VGA coolers, yadda yadda yadda it is harder and harder to build a computer that doesn't sound like a blender on high. I am afraid that after a year of searching I can only conclude that the Antec Super Lanboy is the only way to go. You get dual 120's, and pair that with whatever psu that has a 120mm fan and Zalman CPU and VGA coolers and a honkin passive northbridge cooler you could quietly air-cool the most power hungry systems today, all with quiet and slow moving fans.drewski - Monday, February 28, 2005 - link
yeah, the pc-60 has 2x80mm up front. i've got a pc-65b and really like it's simple look. i'm thinking of the TT Dream, though for my next system.http://www.newegg.com/app/viewproductdesc.asp?desc...
if only the side window didn't say ThermalTake!
L3p3rM355i4h - Monday, February 28, 2005 - link
Well, at least anand isn't reviewing the riced out cases anymore, but this case doesn't seem to be anything special. My antec SOHO 1040 seems to basically do the same damn thing and its $50 cheaper with a decent 400 watt psu.tonyou - Monday, February 28, 2005 - link
Actually Cooler Master's old ATCS cases had half of Lian-Li's so called, "innvoations" (extensively implemented thumb screws, removable mobo tray, blow holes) before Lian-Li started making aluminum cases.tonyou - Monday, February 28, 2005 - link
crimsonson - Monday, February 28, 2005 - link
Lian-Li was once very innovative company. PC-60 was a forerunner to G5's case. They extensively implemented thumb screws, edgeless designs,removeable mobo trray, removeable HDD rack, system fan speed control, blow holes, etc.And this was several years ago - before G5 and TT [TT was dsigning alien looking case at that time]. Others tried to copy, but usually end up having the looks but not the guts of the PC60.Unfortunately other than the V1000, they have not done much. Given V1000 is a great case.
My current system is a PC60. It is a great case. Very quiet and very cool.
The V1000 is probably going to be my next case. Unless somebody comes up with a better case by then...
Deucer - Sunday, February 27, 2005 - link
Why can't case manufacturers take a hint...Build a classy looking case constructed of brushed aluminum. Incorperate tooless features(maybe just thumbscrews but at least all thumbscrews). Use less 120mm fans, not a bunch of loud 80mm fans. Don't put the front ports at the bottom of the case. Price the case around $100.
Who wouldn't buy that case? Is this harder than I think it is? Are we talking rocket science here? Would manufacturing the case I described be too expensive? Does the case I'm describing exist already and I'm missing it?
epiv - Sunday, February 27, 2005 - link
I actually really like Lian Li's Case. I love the design of the case. It is really easy to work with. I already have a PC 65 and PC 68. I am planing to get a V-series.IceWindius - Sunday, February 27, 2005 - link
Im sorry, but Lian Li's case designs are absolute crap. The only one that looked decent was the PC-68 that I had a few years ago.val - Sunday, February 27, 2005 - link
forget that i installed cross blade fan (30cm) in my cm stacker....