CPU Power Consumption and Thermal Stability


CPU Power Consumption

Taking into account Kirin 950’s excellent performance and power efficiency and ARM’s claim that its A73 CPU consumes 20%-30% less power than Kirin 950’s A72 cores (same process, same frequency), it’s only logical to expect Kirin 960 to be the new efficiency king. Before earning that distinction, however, the 960’s A73 cores need to be physically implemented on silicon, and there are many factors—process and cell library selection, critical path optimizations, etc.—that ultimately determine processor efficiency.

To get a feel for CPU power consumption, I used a power virus with different thread counts to artificially load the cores. Using each device’s onboard fuel gauge, the active power was calculated by subtracting the device’s idle power, where it was doing nothing except displaying a static screen, from the total power for the given scenario. This method compensates for the power used by the display and other hardware components, but it’s not perfect; there’s no way to separate power consumed by certain necessary blocks, such as SoC interconnects, memory controllers, or DRAM, so the figures below include some additional overhead. This is especially true for the “1 Core” figures, where SoC interconnects and busses first ramp to higher frequencies.

System Active Power: CPU Load
+ Per CPU Core Increments (mW)
SoC 1 Core 2 Cores 3 Cores 4 Cores
Kirin 960
Cortex-A73
@2.362GHz
1812 2845 4082 5312
- +1033 +1237 +1230
Kirin 955
Cortex-A72
@2.516GHz
1755 2855 4040 5010
- +1100 +1185 +970
Kirin 950
Cortex-A72
@2.304GHz
1347 2091 2844 3711
- +744 +753 +867
Exynos 7420
Cortex-A57
@2.1GHz
1619 2969 4186 5486
- +1350 +1217 +1300
Snapdragon 810 v2.1
Cortex-A57
@1.958GHz
2396 5144 8058 not allowed
- +2748 +2914 -
Snapdragon 820
Kryo
@2.150GHz / 1.594GHz
2055 3330 4147 4735
- +1275
(2.150GHz)
+817
(1.594GHz)
+588
(1.594GHz)
Snapdragon 821
Kryo
@2.342GHz / 1.594GHz
1752 3137 3876 4794
- +1385
(2.342GHz)
+739
(1.594GHz)
+918
(1.594GHz)
Kirin 960
Cortex-A53
@1.844GHz
654 885 1136 1435
- +231 +251 +299
Kirin 935
Cortex-A53
@2.2GHz
1062 1769 2587 3311
- +707 +818 +724

Surprisingly, the Kirin 960’s big CPU cores consume more power than the Kirin 950’s A72s—up to 43% more! This is a complete reversal from ARM’s goals for the A73, which were to reduce power consumption and improve sustained performance by reducing the thermal envelope. There’s no way for us to know for sure why the Kirin 960 uses more power at its highest operating point, but it’s likely a combination of implementation and process.

The Kirin 950 uses TSMC’s 16FF+ FinFET process, but HiSilicon switches to TSMC’s 16FFC FinFET process for the Kirin 960. The newer 16FFC process reduces manufacturing costs and die area to make it competitive in mid- to low-end markets, giving SoC vendors a migration path from 28nm. It also claims to reduce leakage and dynamic power by being able to run below 0.6V, making it suitable for wearable devices and IoT applications. Devices targeting price-sensitive markets, along with ultra low-power wearable devices, tend to run at lower frequencies, however, not 2.36GHz like Kirin 960. It’s possible that pushing the less performance-oriented 16FFC process, which targets lower voltages/frequencies, to higher frequencies that lay beyond its peak efficiency point may partially explain the higher power consumption relative to 16FF+.

The differences we’re seeing between Kirin 960 and 950 are unlikely to come from the difference in process alone, however. Implementation plays an even bigger role and allows a semiconductor company to get the most performance/power/area from a given process. HiSilicon did a great job with the Kirin 950 on 16FF+, which is why its efficiency is so good. This was always going to be a tough act to follow, and despite the similarities between 16FF+ and 16FFC from a design perspective, it’s still a different process with different requirements. It’s impossible to say how close HiSilicon came to the optimal solution, though, because we have no other examples of A73 on 16FFC for comparison.

The Kirin 960’s peak power figures are actually very close to what I measured for Kirin 955, the higher-clocked version of the Kirin 950. Its per-core increases are similar to the Exynos 7420’s lower-frequency A57 cores too, only about 50mW less.

The Kirin 960’s A73 cores consume less power than the two high-performance Kryo cores in Snapdragon 820/821, though, using up to 2.8W for two cores versus 3.1W to 3.3W for two Kryo cores. The quad-core Snapdragons’ remaining two cores run at a lower peak frequency and consume less power, nullifying Kirin 960’s power advantage when using 3-4 cores.

PCMark - Work 2.0 Battery Life

Despite the higher power consumption at the CPU’s highest operating points, Huawei’s Mate 9 actually does very well in our battery life tests. Its 13.25 hours of screen on time in our Wi-Fi Web Browsing test is a full 3 hours more than the Mate 8, and its nearly 10 hours in PCMark 2.0 is 27% better than the Mate 8. These real-world battery life results seem to be at odds with our CPU power measurements.

The graph above shows the Mate 9’s total system power consumption while running the PCMark 2.0 performance tests (all radios were turned off and the display’s brightness was calibrated to only 10 nits to better isolate the power consumption of the internal components). With the exception of some power spikes caused by increased activity while loading the next test, total power consumption remains below 3W and generally below 2W, well under the 5.3W we measured from Kirin 960’s four big cores.

I’m showing this graph because most of the apps we use everyday behave similarly to PCMark, where we see threads migrate from the little cores to the big cores and back again and DVFS working hard to match CPU frequency with load (actually, most apps would show significantly more CPU idle time, so PCMark is still a bit extreme in this regard). Many workloads will only use 1-2 big cores too, like we see here with PCMark. With only 2 cores at their max operating point, the Kirin 960 only consumes 754mW more power than Kirin 950 instead of 1601mW more when using 4 cores. So while CPU efficiency is certainly important, we need to frame it in terms of real-world workloads, and we also cannot forget the impact software (scheduler, CPUfreq, CPUidle) has on overall battery life.

Looking at power alone can be misleading; a device may use more power than another, but if it completes the task in less time, it may actually use less energy, leading to longer battery life. For both of the graphs above, the phones’ radios were turned off and their displays calibrated to only 10 nits (the lowest common setting) to reduce the impact of different screen sizes and efficiencies from skewing the results.

In the first graph, which shows the total energy consumed by each phone when running the PCMark 2.0 performance tests, the Mate 9 consumes 16% more energy overall than the Mate 8 (despite my efforts to minimize display influence, the P9’s energy consumption is slightly lower than the Mate 8’s, which is likely because of its smaller screen). The Video and Photo Editing tests, which employ the GPU, show some of the biggest percent differences, but the Writing test, which makes frequent use of the CPU’s big cores, also shows a larger than average difference. The LeEco Le Pro3 and its Snapdragon 821 SoC actually consumes more energy than the Mate 9 in the Data Manipulation and Writing tests, where it has to use its 2 high-performance Kryo cores, but less in the Video and Photo Editing tests that use the GPU.

The second graph divides the PCMark score by the energy consumed to show efficiency. Because of the Mate 9’s better performance, it’s actually 7% more efficient than the Mate 8 in the Writing test and 17% more efficient in the Data Manipulation test. The Mate 9’s GPU efficiency is the worst of the group, judging by its scores in the Video and Photo Editing tests. In contrast, the Pro3’s Adreno 530 GPU posts the highest efficiency values in these tests.

The Mate 9 lasts longer than the Mate 8 in the PCMark battery test despite its Kirin 960 SoC consuming more energy, so Huawei must have reduced energy consumption elsewhere to compensate. The display is the most obvious place to look, and the graph above clearly shows that the Mate 9’s display is more efficient. At 200 nits, the value we use for our battery tests, the Mate 9 shows an estimated 19% power reduction. In the time it takes to run PCMark, this translates to 82 J of energy, nearly erasing the 102 J difference between the Mate 9 and Mate 8. I suspect the difference in display power may actually be a little bigger, but I lack the equipment to make a more precise measurement. This still does not account for all of the Mate 9’s power savings, however, but a full accounting is beyond the scope of this article.

CPU Thermal Stability

Our CPU throttling test uses the same power virus we used above with two threads running on two of the big A73 CPU cores for a duration of about 30 minutes. The goal is to determine a device’s ability to sustain peak CPU performance without throttling and potentially reducing user experience. This is a product of CPU power consumption, the device’s ability to dissipate heat, and the device’s thermal safety limits.

The Mate 8 and its Kirin 950 are able to sustain peak performance with two A72 cores indefinitely, a remarkable feat. The Mate 9 does not fare as well because of Kirin 960’s elevated power use; however, it still manages to hold two of its A73 cores at peak frequency for 11.3 minutes and does not throttle enough to affect performance in a noticeable way for 20 minutes, which is still a very good result. I cannot think of any CPU-centric workloads for a phone that would load two big cores for anywhere near this long, so it’s safe to say that CPU throttling is not a problem for the Mate 9. It will be interesting to see if this holds true for Huawei’s smaller phones such as the P10, which will not be able to dissipate heat as readily as the big, aluminum Mate 9.

Memory and System Performance GPU Power Consumption and Thermal Stability
POST A COMMENT

85 Comments

View All Comments

  • hans_ober - Tuesday, March 14, 2017 - link

    A10 deepdive? Reply
  • Araa - Tuesday, March 14, 2017 - link

    Thats the smell of a dead elephant in the room. Reply
  • MrSpadge - Tuesday, March 14, 2017 - link

    Wrong thread, this one is about Kirin 960. Reply
  • niva - Tuesday, March 14, 2017 - link

    Well I for one am glad to see this deepdive into the performance. It gives a much more complete picture of what's happening. People on Android Central were giving this chip such glowing reviews and I really wasn't sold on it yet. That being said I'm fairly confident AC is sponsored by Huawei because any phone they push out gets glowing reviews despite it's Chinese hackware. Only Huawei phone worth buying is the Nexus 6P and still remains so. This won't change even if/when they actually do make better hardware. Reply
  • close - Tuesday, March 14, 2017 - link

    "Only Huawei phone worth buying is the Nexus 6P [...]. This won't change even if/when they actually do make better hardware."
    So you "know" that even if they make better hardware only the 6P will be worth buying? Crystal ball much? Are you also sponsored by somebody or did you just choose ignorance? And I'm being delicate here.
    Reply
  • BertrandsBox - Tuesday, March 14, 2017 - link

    "Only Huawei phone worth buying is the Nexus 6P and still remains so. This won't change even if/when they actually do make better hardware."

    If Android Central gets accused of hiding sponsorship from Huawei, do silly comments like these make you someone who's being paid by Huawei's competitors?
    Reply
  • Alexvrb - Tuesday, March 14, 2017 - link

    A lot of reviewers take free bread. Especially ones that aren't making enough off ads alone, or that have a personal slant, etc. I'm not saying that includes AC, but you shouldn't dismiss it so casually either. The most effective place to apply grease is reviewers and review sites. The Kirin 960 is obviously a step sideways, so to give it glowing reviews is hilarious.

    However... even though the process and design they chose may be hindering power consumption at these clocks, they did have another goal in mind. Cost. If they really achieved such massive increases in density, and have a similar % yield, they can sell bucketloads of these chips for cheap. So at least for the mid-range devices, these would be plenty good for the foreseeable future.
    Reply
  • close - Wednesday, March 15, 2017 - link

    A lot of internet commentators are paid to praise one sine or company and accuse competing ones. This is an undisputed fact so you shouldn't dismiss this casually.

    The point wasn't whether AC is or isn't on Huawei's payroll but rather the attitude of the person commenting who basically disqualified themselves by saying that "even with better products they will never be worth buying".That sound like the user doesn't actually care about the product or the facts, and is only here to criticize Huawei and anything that might be related to them.

    And no matter what he says in the future none of it can be taken seriously and contain any trace of objective value ;).
    Reply
  • fanofanand - Wednesday, March 15, 2017 - link

    Where does one go to cash in on the whole "paid internet commenting" bit? I'd like some of that "internet money" please :) Reply
  • Meteor2 - Wednesday, March 15, 2017 - link

    Yeah me too Reply

Log in

Don't have an account? Sign up now