Random Read Performance

The random read test requests 4kB blocks and tests queue depths ranging from 1 to 32. The queue depth is doubled every three minutes, for a total test duration of 18 minutes. The test spans the entire drive, which is filled before the test starts. The primary score we report is an average of performances at queue depths 1, 2 and 4, as client usage typically consists mostly of low queue depth operations.

Iometer - 4KB Random Read

All the Samsung drives are crowding the top of the chart for low queue depth random read speeds, and the 750 EVO is way ahead of any other planar TLC drive here.

Iometer - 4KB Random Read (Power)

With power usage in the middle of the pack, the 750 EVO and 850 EVO are some of the most power-efficient drives on this test, but drives like the Plextor M6V are still at the top of the efficiency ranking.

In addition to offering great performance at low queue depths, the 750 EVO scales up to reach higher speeds at QD32 than any non-Samsung drive, without power consumption getting out of hand.

Random Write Performance

The random write test writes 4kB blocks and tests queue depths ranging from 1 to 32. The queue depth is doubled every three minutes, for a total test duration of 18 minutes. The test is limited to a 16GB portion of the drive, and the drive is empty save for the 16GB test file. The primary score we report is an average of performances at queue depths 1, 2 and 4, as client usage typically consists mostly of low queue depth operations.

Iometer - 4KB Random Write

Taking capacity into account, the 750 EVO provides much better random write speeds than any other planar TLC drive, and the 250GB model is competitive against many MLC drives.

Iometer - 4KB Random Write (Power)

The 750 EVO is high-performing for a TLC drive but at the cost of requiring more power than most planar TLC drives and much more than the 850 EVO.

The 120GB 750 EVO shows almost no scaling with queue depth, while the 250GB needs a queue depth of at least two to reach full performance. By contrast, the 120GB 850 EVO shows a little bit of performance scaling from QD1 to QD2 and the 250GB 850 EVO doesn't hit full performance until QD4.

AnandTech Storage Bench - Light Sequential Performance
Comments Locked

109 Comments

View All Comments

  • lilmoe - Friday, April 22, 2016 - link

    Meh. I'll wait until it's half price.
  • haukionkannel - Friday, April 22, 2016 - link

    Well, this is 10$ cheaper that 850evo, so this will be very popular among system builders and other with tight budget. Normal upgrade user will definitely go for 850. But this is good enought to most customers.
  • Space Jam - Friday, April 22, 2016 - link

    $10 for considerably worse performance does not a winner make.

    I have a hard time swallowing the cheapo, terrible performance $60 TLC drives. If Sammy thinks anything more than $65 is a good price they have another thing coming.

    $60 for a budget 120GB SSD is some audacity.

    I and most others will stick to BX100s @ $70 and 850 EVOs @ $75 during the (frequent) sales.
  • jabber - Friday, April 22, 2016 - link

    And if it's upgrading a lot of the older machines desktops and laptops that still only run on SATA II...it doesn't matter. As long as it pushes 285MBps (ish) all day that's all it needs. A lot of kit out there is still SATA II.
  • Alexvrb - Friday, April 22, 2016 - link

    Yeah it's got a sequential speed cap. Not all tasks are about peak speeds. I'm pretty sure in terms of IOPS a decent SSD will still beat the snot out of an OEM-grade penny-pinching budget model, even on old SATA 2. Which brings us back to the idea that this is for OEMs and builders - truly this is a "builder-grade" component. If you're upgrading or building for yourself, you'll likely pay a few extra bucks for an 850 Evo or similar unit.

    With that being said, any of the modern SSDs are better than a mechanical drive. Blech.
  • leexgx - Wednesday, April 27, 2016 - link

    this drive will likely be perfect for the older apple laptops that have that dodgy cable that does not support SATA 3 but the controller does (the cable fails if a high speed cable is used) i had to use a DVD HDD caddy on number of apple laptops due to that issue where it will not detect the SSD or HDD
  • leexgx - Wednesday, April 27, 2016 - link

    high speed drive is used (not cable is used) edit be nice on here but that's unlikely
  • Death666Angel - Friday, April 22, 2016 - link

    I'm guessing the marketing value for "Performance Samsung SSD inside" is considerably higher than comparable Sandisk or Crucial SSDs. And the 10 bucks off compared to the 850 means the margins remain. And if current 1TB laptop drives get replaced by these 250GB 750s, I think everyone is a winner. :D
  • Samus - Monday, April 25, 2016 - link

    It's funny you mention that because I would prefer a Sandisk or Crucial/Micron drive over a Samsung anyday.

    Have you ever tried warranting a Samsung drive? They are hell to deal with. And yes, I still have a sour metallic taste after the 840 Evo debacle that essentially was never fixed.

    I also think Crucial/Sandisks Marvell drives, albeit slower, are more consistent, stable and deal with power loss substantially better than the MGX. The fact Samsung is making an SSD with 35TBW endurance in 2016 is pretty damning. I've seen 20GB racked up on old Intel X25-M's in a matter of years so 35GB in a 5 year period isn't out of the question. Just about any other SSD or hard disk for that matter will handle double that no problem at the rated capacity.
  • vladx - Monday, April 25, 2016 - link

    " after the 840 Evo debacle that essentially was never fixed."

    Don't know what you mean, I also have a 840 EVO and can confirm the performances issues are gone after the 2nd fix.

Log in

Don't have an account? Sign up now