AMD Performance Midrange

The introduction of Phenom II has made putting together an AMD Performance Midrange a joy again. While the Phenom was an honest competitor at the price points where AMD chose to compete, the poor overclocking of the AMD Phenom compared to Intel Core 2 dual/quad-core processors was always a nagging reality. Phenom II changes all that, and AMD in 45nm clothes is once again a screaming overclocker. We reached 3.9GHz in our testing for the Phenom II launch with a Phenom II 940 CPU. That same CPU is the starting point for our AMD Performance Midrange PC.

AMD Performance Midrange PC
Hardware Component Price
Processor Phenom II x4 940 Black Edition
(3.0GHzx4 125W 4x512KB L2, 6MB L3)
$275
Cooling Tuniq Tower 120 $46
Video SAPPHIRE 100251SR Radeon HD 4870 X2 $400
Motherboard ASUS M3A79-T Deluxe $189
Memory G Skill DDR2-1100 (PC2-8800) 4GB Memory Kit F2-8800CL5D-4GBPI $90
Hard Drive Seagate Barracuda 7200.11 ST310000333AS 1TB $110
Optical Drive LG BD/HD DVD / 16x DVD+/- RW GGC-H20LK $99
Audio Creative 7.1 Sound Blaster X-FI Titanium $90
Case Antec Nine Hundred Black Steel ATX Mid Tower $100
Power Supply SILVERSTONE ST70F 700W SLI Ready CrossFire Ready 80 PLUS Certified Modular Active PFC Power Supply $100
Display ASUS VW246H Black 24" 2ms(GTG) HDMI Widescreen LCD Monitor (1920x1080) $290
Speakers Logitech G51 155 watts RMS 5.1 Surround Sound Speakers $90
Input Microsoft CA9-00001 Black PS/2 Standard Keyboard and Optical USB/PS2 Mouse - OEM $16
Operating System Microsoft Vista Home Premium OEM $99
Bottom Line   $1994

You can read our review of the Phenom II X4 for additional information. The Phenom II 940 X4 at 3.0GHz is the fastest of the currently shipping AMD Phenom II processors. The Phenom II is very similar in L2/L3 cache configuration to the recently introduced Intel Core i7. Performance is also comparable to the best Intel chips. As the first 45nm AMD processors the Phenom II also overclocks very well, finally approaching the overclocking levels enjoyed by Intel since the introduction of the Core 2 Duo.

We've paired the Phenom II 940 with the superb ASUS M3A79-T Deluxe. At $190 the ASUS is not cheap or even a great value for a 790FX/SB750 setup, but it is one of the most loaded and best performing AMD boards we have used this year. ASUS loads the board with Gigabit LAN, IEEE 1394 support, four PCI-E x16 slots (dual x16, tri x16/x8/x8, or quad x8), two PCI slots, a single eSATA port, and six 3Gb/s SATA ports featuring RAID 0/1/10/5. The M3A79-T Deluxe also works very well with Phenom II and end-users will not be disappointed in performance or overclocking capabilities.

The ASUS also includes superb onboard sound with the ADI AD2000B 8-channel HD audio. This is probably the best onboard sound solution we have tested so far. A Creative 7.1 Sound Blaster X-FI Titanium audio card was included in the components mostly for game compatibility. You can save $90 and use the onboard ADI sound without sacrificing much if anything in sound quality.

The GPU choice is the top-performing Sapphire 100251SR Radeon HD 4870X2. This dual-GPU card is an exceptional performer on the 790FX chipset, as you would expect. The selling price has been around $500, but with current promotions you can buy this Sapphire 4870X2 for just $400. That is an exceptional buy that delivers top performance at a very fair price, and if you ever want more gaming power a quad-GPU (two 4870X2 cards) is an option, albeit one we don't really recommend unless you have a 30" LCD.

The Tuniq Tower 120 cooler was also used on the AMD Value Midrange System described on page 4. The rest of the components are the same as the Intel Performance Midrange PC. This includes the Seagate 1TB hard drive, the LG GGC-H20LK BD/HD reader and 16X DVD burner, the Antec Nine Hundred case, the Silverstone 700W PSU, the Logitech G51 powered speakers, the ASUS 1080p 24" 1920x1080 LCD Monitor, the Microsoft OEM keyboard/optical mouse, and Microsoft Vista Home Premium OEM. You can find more information on these choices on the previous Intel Performance Midrange page or on page 3.

Intel Performance Midrange Final Words
Comments Locked

77 Comments

View All Comments

  • aenagy - Sunday, February 1, 2009 - link

    I can't find the Xigmatek HDT-D1283 on the Xigmatek web site for thier air cooling products (http://www.xigmatek.com/product/aircooling.php)">http://www.xigmatek.com/product/aircooling.php) or by Googling (http://www.google.ca/search?hl=en&q=site%3Axig...">http://www.google.ca/search?hl=en&q...k.com+D1...

    Is the author referring to the Dark Knight-S1283V/Dark Knight-S1283? Which one?

    If so, what is the difference between the S1283V and S1283. Even after downloading the manuals I have not been able to figure it out. Maybe its the difference between the push-pin mounting vs. screws?
  • Joe Schmoe - Monday, January 26, 2009 - link

    Hi folks!!

    I love this site and it was an excellent article.

    I have a slightly different (perhaps warped) perspective on this topic. It's based on too many years of living in poverty so I could keep my hyperfast, sweet internet connection going.

    I'm in the USA so EU readers don't laugh at my appalling slow connection.

    I think your midrange systems might be specced a little bit high.
    It's exactly what I might buy today but, when I was still in college and money was a little tighter my gaming rigs were a little more.. rickety.

    Do that many midrange rigs have blue ray drives?

    Speaking from my heart..

    I think I'm a midrange builder. A midrange PC doesn't have to start off so... well rounded....

    No matter what we tell ourselves or how much we plan it. There are situations when we usually blow all our money on the new CPU (whether its rational or not) and upgrade the rest of the system bit by bit over the next year.

    Practically all the CPU's on the market today are fast enough that's almost an undisputed fact.

    But we have the I7 and the Phenom 2!! brand new!! for sale!! new chips!!

    It's almost impossible to buy anything else. I couldn't bring myself to buy a e8600 instead. I can get a blue ray drive next month. I'd swap one dvd drive between two computers for 6 months if I have too to price in . (I've done that many times)

    If you grabbed a regular DVD drive for now and used the onboard sound for a while. Those are things are easy upgrades-- two paychecks. You saved about $150 which you can through at the processor and board.
    If you drop down to a 4850 (i know it hurts a little) and now can get an I7 920 and the x58 board. Within 6 months you buy a 2nd 4850 and you're golden.

    The same setup for a Phenom 2 build.

    My X-fi Extreme card passes from system to system like its a family hierloom.

    By summer time I'd have the blue ray drive and probably crossfire 4850's.

    My next computer is probably going to be:

    One of the new processors.
    New motherboard.
    My current graphics card.
    My current 4 gigs or RAM 6 gig of ram four of which I own already.

    It's sad but true..

    Well maybe not this time..








  • 7Enigma - Wednesday, January 21, 2009 - link

    Well wanted to thank everyone in the comments section, this and other articles for piecing together my upgrade system. Pretty much replaced everything except for the HD and case. Wanted to give a quick rundown of how it went and my initial impressions of the components:

    -E8500 CPU- You can tell it's been a while since I've built a system. Not seeing pins ON the chip kind of threw me for a loop. :)

    -XIGMATEK HDT-S1283 120mm Rifle CPU Cooler was very annoying. Currently @35C idle at stock speeds on the E8500. The push pins suck, absolutely, positively suck. I had serious concerns I had damaged the CPU because some of the pushpins refused to stay down and would pop back up rocking the heatsink. The backplate accessory was $15 which would have increased the price of this cooler to top cooler territory. I will have to wait and see how this pans out because I do not have a good feeling about the longevity of those pins (imagine if they were to release when upright and on, that would be a disaster). I will never purchase a pushpin design again that is for sure. Also have quesetionable faith in the design of the base plate that has the heat pipes directly at the base. There are significant ridges that will not contact the cpu core. I used a bit more thermal paste than normal to hopefully fill in these ridges. Oh and this thing is HUGE. I literally sat there for 20min trying to decide which direction I wanted the fan/heatsink to face. There was NO clearance issues (thank you so much Mr. Fink!), which made the decision harder since I was not constrained by the mobo design. I ended up going with the heatsink moving air from the ram towards the back of the case (from right to left if looking at the tower sitting upright). I had originally wanted to go from the bottom of the case to the top, but I was concerned the GPU would block airflow.

    -Gigabyte GA-EP45-UD3R - As the article mentioned I have no plans on SLI/X-fire and so went with the R model instead. Very nice piece, installed without a problem, retaining bracket for the CPU is well designed/made. I have zero complaints except for the short IDE connectors. Forced me to use a SATA DVD burner since the single one included could not stretch to hit both the HD and the burner even when I moved them closer together. Funny thing: I tried to find the VGA monitor cable on the mobo to do a test run before plugging in the expensive gpu only to realize it has no onboard video! :) Don't need it, but I hate firing up the system for the first time, and like to have the least amount of components in case something fries (never happened yet to me but I still worry).

    -Tuniq Potency 550w PSU - On recommendation by Mr. Fink I grabbed this new PSU. Let's hope it makes the 500-550w PSU roundup that hoepfully will be coming out soon. Seems very high quality for the cheap price ($40 after $40 rebate), not modular which is annoying to me after coming from a modular PSU, but at least sleeved. I have a full tower (I think) and unfortunately the connectors are relatively short and so I had to move my HD closer to the PSU which isn't a big deal and would be a non-issue with a smaller mid-tower.

    -SAPPHIRE 512MB Radeon HD 4870 VapoChill- This is a kickass card. Factory OC'd, very nice heatpipe tech, and while not completely externally exhausted outside of the case, a fantastic design. To top it off with the rebate it was actually $10 CHEAPER than the stock Sapphire 512MB card. Don't have temp numbers yet as I haven't installed Vista and Catalyst drivers. Extremely pleased with this purchase and highly recommend it. There is nothing like being able to keep a video card stock and still being able to OC it more if needed (I hate changing out the coolers on GPU's).

    -OCZ Reaper 4GB (2 x 2GB) DDR2-1066 Dual Channel Kit- This one had me really concerned. Firstly because the package came slightly damaged and I was concerned it may have been damaged (it's just a clamshell blister pack), and secondly because with the heatpipe it is VERY tall for ram. I was concerned the CPU cooler would not clear the ram, but again a massive thanks for Mr. Fink for making sure his components were compatible. Solidly designed, they have some massive heatsinks on them and feel like you could throw them across the room. Let's hope the added weight doesn't cause issues with the socket over time however.

    OK that's about it. One more time thank you very much for the article and followup advice! Now off to game!
  • 7Enigma - Wednesday, January 21, 2009 - link

    Forgot to mention all parts were purchased from either Zipzoomfly (Vista and E8500) or Newegg (everything else). Ended up with about $100 in rebates if I so choose to fill them all out (some are $10 and probably not even worth the effort).
  • 7Enigma - Tuesday, January 20, 2009 - link

    Quick question. What is the rational behind only 4GB of ram in the non-i7 systems? With DDR2 ram prices so rediculously low and using Vista X64, isn't there a benefit to higher ram amounts?

    Just wondering because I am building a C2D rig and only got 4GB and wondering if I should grab another kit at these cheap prices.
  • robl - Sunday, January 18, 2009 - link

    First off, great article and good suggestions on the components. I'm itching to pull the trigger on an i7 upgrade with lots of memory and can't wait for your i7 motherboard roundup.

    I started pricing the intel midrange, and it looks like the motherboard only has 4 memory slots, yet you suggest a triple channel kit. Perhaps just 2x2GB or 4x2GB should be recommended for this board instead?

    Do you have any suggestions for a good overclockable i7 MB for ~$200 that has 6 memory slots?

    Thanks again!
  • 7Enigma - Tuesday, January 20, 2009 - link

    Triple-channel as the name implies means 3. So you get multiples of 3 for the ram amounts. Typically this is 3GB (1X1X1) for the budget builds (I don't know whom would choose this if they are already spending a good bit on a new system), or the much more common 6GB (2X2X2) setup as the guide recommends.

    HTH
  • StormyParis - Thursday, January 15, 2009 - link

    I think value starts to drop sharply after two cores. Does anyone have stats on CPU utilization over a typical day, with 1/2/3/4 cores ?

    4 gigs is also debatable. To me, it's definitely more 'comfort' than 'value'. Even today's bloated software/OS does not really need that much, in most cases. Running WoW, a browser with 10 tabs, and a handful of other apps in 2gigs causes little to no disk thrashing.

    Also, I don't understand why the monitor is included. There's no need to change monitors when you change PCs, and monitor choice is very dependant on use (purely PC work vs films vs games ...).
  • Wesley Fink - Thursday, January 15, 2009 - link

    Our Intel mid-range value system is in fact a Core 2 Duo - two cores. As we detailed in the Guide going for 2GB instead of 4GB will generally save you around $15 in today's market with commodity memory pricing. If saving $15 is that important to you then go for it.

    When we do not list a monitor in system builds many readers complain about the ommission. If including a monitor disturbs you then just subtract out that price from the build.

  • smacfarl - Thursday, January 15, 2009 - link

    The big news in pc performance has got to be the ssd drive.

    I fully expected that you guys would be incorporating $60 sata II flash drives as the boot drives in all these systems in the mid range. Really they should be in the under $1000 systems as well. Sure you can then get a second traditional 500-1RB HDD drive for your movies, music, photos, whatever but even a 32GB flash drive is more than enough to run your OS and main apps from flash. Boot time goes way down and performance up. That's without even using the SSD upgrades announced at CES.

    Seriously where is your head guys? I figure this first review post CES would usher in the new era, but it looks like you guys are sadly behind the curve hear at AnandTech. I am kind of sad because I have always looked at you guys as the leader in terms of system reviews. For example your comment that $300 budget boxes were now feasible minus OS and monitor is right on the money, though many other sites don't want to recognize this reality.

    Wake up Anandtech! Post another guide review with the sdd drives before some else becomes the self-build system review leader.

Log in

Don't have an account? Sign up now