Construction (continued)

In fact, the only major change that occurred to the aesthetics of the monitor is on the height adjustment stand. The stand looks very similar to the original one, but it looks like Dell ditched the rounded design for a slightly different structure. The universal joint on the back actually pivots much easier than the one on our 2001FP, a plus for the 1905FP thus far.


Click to enlarge.


Dell completely redesigned the cable management in the rear, but in our opinion, plastic housing isn't much of an improvement over the previous attempt (which we didn't find very useful either). The monitor still features a quick release for a VESA wall mount. You can also see a button that activates the vertical height adjustment in the picture above.


Dell 1905FP inputs
Click to enlarge.


From the inputs above, you can see that Dell ditched the brick power supply. The 1905FP houses the AC to DC inverter inside the rear panel and hooks up using a standard three-prong 120V AC cable. For comparison, we included a snapshot of the Dell 2001FP input set below.


Dell 2001FP inputs
Click to enlarge.


After a few hours of operation, we recorded the air temperature near the exhausts of the LCD around 28 degrees Celsius with an ambient air temperature of 23 degrees Celsius. This is several degrees cooler than some of the other monitors that we have in the lab, like the Dell 2001FP and NuTech L921G.


Bleeding Light

Several of our forum members are fairly upset about UltraSharp 2005FPW models that have intermittent backlight problems. With this subject in mind, we paid extra attention to backlight issues in case there might be problems on the 1905FP as well. While we did not detect any problems on our panel (screen uniformity was perfect), we did notice that we could actually see the backlights from outside the monitor!


Click to enlarge.


In the image above, you can see the light of the backlights reflecting off something metal. We could not detect the light without looking carefully into the monitor. The obvious problem here is that the electrical components and backlights are exposed to the elements - even if that might be an office environment. If dust settles on the backlights, we could have a big problem with screen uniformity and brightness. Remember the Samsung 193P that uses the same panel? When we tested that LCD, we thought it was innovative that the monitor completely enclosed the LCD panel without any openings. In retrospect, Samsung's decision to do that might have been more function than form.


Opening it Up

After benchmarking this monitor, we opened it up to get a more in-depth look at the individual apparatus. Doing this will certainly void your warranty.


Separating the electronic components from the panel, we can see the underside of the digital/analog PCB on the left and the power inverters on the right. The entire electrical packaging behind the panel is less than an inch thick, which is impressive considering that inverters typically take up bulkier packaging - we refer to power bricks as "bricks" for a reason. We have always applauded integrated inverters in LCDs because they are more efficient. When we have external inverters leading to the monitor, the DC must be modulated and inverted back to AC for the florescent backlights.


Construction DSP & Panel Details
Comments Locked

66 Comments

View All Comments

  • UncleMike987 - Wednesday, May 11, 2005 - link

    A really great monitor, a fantastic display, which surprisingly had no ghosting in games when using the DVI connection.

    But when I plugged this into a VGA connection on a Radeon 9000 AGP card, and the image was pretty dire. Several vertical bands, each of which blurred an entire column of the display. Okay, it could've been the video card, but it looked fine on a CRT monitor. You've been warned !

    The worst thing about this monitor is the price.
    Dell's pricing policy in the UK is madness.

    One of my work colleagues bought this monitor recently, and was charged £299+vat+delivery.
    Two weeks later, the same monitor from the same Dell website cost £243 INCLUSIVE of VAT and delivery, so I bought one for work and one for home. And love it.

    And now, two weeks later, Dell's website is back selling it at £354 inc.

    Seriously, how can you recommend a product whose price is springing around so much ?

    At £243 inc for a quality brand 19" DVI monitor, it's a steal. Buy one now. But don't pay much more than this. With Dell's never-ending and never-static list of special offers and "Must end in 2 days"-style discounts, it's worth holding on for a week or two to save yourself a lot of money.

    Btw, speakers aren't included - but you can buy a matching Dell Soundbar thing to clip on the bottom of the display for £30+vat. Dell's website gives no indication of how powerful these speakers are, so it's hard to know if to recommend them.


    Mike
    Bristol, UK


  • KristopherKubicki - Monday, April 25, 2005 - link

    chrisjs is correct.

    Kristopher
  • chrisjs - Sunday, April 24, 2005 - link

    I am fairly sure that the 1905fp DOES NOT SUPPORT HDCP.

    I just had my local friendly cable co install a SA 4200HD and, when I connect it to my 1905fp the LCD simply displays "cannot display this video mode"

    I hoped it just needed to be configured, but the message continued when I went into to box's automagcic HDTV configuration screen. So I'm pretty sure now this LCD doesn't support DVI/HDCP, only normal DVI.
  • Visor4 - Tuesday, April 12, 2005 - link

    Hi abbetaka,

    I hooked up my Denon DVD-1910 to the monitor using Dell's DVI cable. The video kept switching on and off. I'm assuming this is because Dell uses an 18-pin DVI cable, whereas the DVD player requires a 24-pin cable. When the video was visible, picture quality was excellent (the same as playing a PC DVD player like WinDVD, although my Denon has better deinterlacing). Unfortunately, the red drift artifacts were still visible.

    I just received an exchange unit, and much to my dismay it has the same defect. I think it's time to call Dell again, return both these units, and pick up a 2001FP before they disappear.

    Visor
  • abbetaka - Thursday, April 7, 2005 - link

    The article states, "According to the technical documentation, the Genesis gm5321 is HDCP capable – so you should be able to hook up a DVI-HDCP receiver or DVD player to the monitor without worries."

    ... Has anyone confirmed that HDCP does work on this? I took the link to the gm5321 document, and it says...

    Ultra-Reliable DVI[tm] Input (gm5321)
    * Operating up to 165 MHz (up to UXGA 60Hz)
    * Direct connect to all DVI-compliant digital transmitters
    * High-bandwidth Digital Content Protection (HDCP)
    Note: HDCP function is available in gm5221H version only.

    ... That's the only mention of gm5221 in the whole doc though. Does it mean the gm5321 doesn't do HDCP at all? Or just that gm5221s other than the -h don't? Or.. ..? I'm not sure how to interpret it.

    I'm considering getting a DVI outputting DVD player but I don't have a TV and would rather not go to the trouble if this LCD won't do HDCP.

    Anybody? Bueller?

    Thx...
  • Visor4 - Tuesday, April 5, 2005 - link

    This artifact definately shows up in other movies and media. It's hard not to miss.

    I suspect that I have a defective monitor, and even Anandtech's review clearly shows this bleeding effect on the Matrix screenshot:

    http://www.anandtech.com/displays/showdoc.aspx?i=2...

    Look at Keanu's right inner ear (well, the left inner ear from our point of view) and the right (left) part of his upper lip. Notice how there's a very strong hue of red on those parts? That's an example of what I see, but mine is more exaggerated when people and objects are moving.

    Does anybody else see this artifact when watching movies? I have Dell sending me another 1905FP as an exchange so I'll verify if the entire line has this problem. If so, I think I might pick up a 2001FP while they're still available and see how an IPS panel performs compared to this VA panel.

    Visor
  • Visor4 - Sunday, April 3, 2005 - link

    Hi Kristopher,

    Could you please explain what "red shift" means? I just received a 1905FP, and while I was watching a Sex and the City episode I noticed a red drift/shift type of artifact. It was as if the red colour was lagging behind everything else. It was easiest to see under their noses, like they were all getting nosebleeds. Other than that, I haven't really seen this "drift" in other media. I'll keep watching and let everyone know.

    Thanks,
    Visor
  • goldsheet - Saturday, April 2, 2005 - link

    Recently bought one for $317 (after 40% off coupon) and am quite satisfied for business applications. Video and gaming not a priority for me.
  • falcc - Monday, March 14, 2005 - link

    I just recieved mine as well. It was 20% off so it was a fantastic price when you compare it to the Samsung. Movies aren't great on it but I'm quite happy with the quality in games. I've come from a CRT and this is my first LCD. When I first played HL2 on it I wasn't overly pleased but after adjusting the brightness etc. it is now great.
  • tscholz - Thursday, March 3, 2005 - link

    Just bought this monitor, everything looks perfect. There is very little ghosting, and the contrast is very good. Like #54, video is very blocky when playing DivX/XviD/whatever. But I think this because of the lack of blooming in LCD screens, artifacts of movies are more visible. Can't see any other way a monitor can affect video playback.

    The reason i bought it, was in part bacause of this article, and that is uses the same panel as the Samsung 139P. But while being as good as the Samsung 139P, it costs less.

Log in

Don't have an account? Sign up now