Motherboards Memory Storage Cases/Cooling/PSUs IT Computing Displays Mobile Mac CPUs & Chipsets Video Digital Cameras Linux Gadgets Systems Trade Shows Guides Home Increase Font Size Decrease Font Size Change Page Size
The Lynnfield Preview: Rumblings of Revenge
The Lynnfield Preview: Rumblings of Revenge
Date: May 29th, 2009
Topic: CPU & Chipset
Manufacturer: Various
Author: Anand Lal Shimpi
Buy the HP ELITE DDR3 1TB Premium 64-bit Home
Blank
 Newegg $859.99
 
 

The First Lynnfield Sample

Let me preface this with the usual disclaimer. Intel did *not* supply me with this chip and it is most definitely pre-production silicon, not necessarily indicative of final, shipping performance.

With that out of the way, here is Lynnfield:


Lynnfield (front) vs. Bloomfield (back)


Core i7-Bloomfield (left) vs. Lynnfield (right)

It’s a lot smaller than the LGA-1366 Core i7, but compared to current Core 2 Quads it’s actually similar in size:


LGA-775 Core 2 Duo (left) vs. LGA-1156 Lynnfield (right)

Flipping the chips over you see that Lynnfield has a much higher pad density, enabling Intel to fit 1156 pads in about the same space as it fit 775 pads just a few years prior.


Core 2 (left) vs. Lynnfield (right)

Once more, I’ve blanked out all of the caps and other markings on the chip to protect the innocent.

The initial Lynnfield samples were all clocked at 2.13GHz with HT enabled. Turbo mode was also enabled but it too was a meager 2.26GHz regardless of how many cores were active. All of this was to enable motherboard manufacturers to test compatibility and performance of their P55 without giving away Lynnfield’s true performance.

Unfortunately this is the sample I tested with. Thankfully it was healthy enough for me to overclock the BLCK to 166MHz, resulting in a 2.66GHz frequency. Turbo mode was still stuck at a 1x increase over the stock frequency, so final Lynnfield performance should be much better in single and dual threaded apps than what you’ll see here today.

The results on the coming pages show three configurations. Lynnfield running at 2.13GHz with HT enabled, 2.66GHz with HT enabled and 2.66GHz with HT disabled. The latter is going to be the closest to actual Lynnfield performance (albeit still far away thanks the sample’s crippled turbo mode), the 2.66GHz with HT enabled just shows how much we gain from HT and the 2.13GHz chip is an experiment in seeing how low Intel could drop these things and still have a competitive part.

If you thought Nehalem needed Hyper Threading to be a strong performer, you were dead wrong.

Comments About Lynnfield's Readiness

The current rumors in the press are that Lynnfield is being held back in order to clear out excess Core 2 Quad inventory before it ships, because once this thing ships no one is going to want a Penryn anymore. Based on what I've seen, Lynnfield isn't ready just yet - it's not an artificial delay.

The motherboards are in rough shape, CF/SLI isn't working and we're still at very early revs of the CPU's silicon. While I think that the chip will be ready far in advance of its rumored September shipdate, the CPU and motherboards aren't yet.

The Test

Once more: the CPU we've tested here is pre-production silicon without all of its turbo modes enabled. I expect final, shipping performance to be higher in some cases.

Motherboard: Pre-release P55 Motherboard (Intel P55)
Intel DX58SO (Intel X58)
Gigabyte GA-MA790FX-UD5P (AMD 790FX)
Chipset:

Intel P55
Intel X58
AMD 790FX

Chipset Drivers: Intel 9.1.1.1012 (Intel)
AMD Catalyst 8.12
Hard Disk: Intel X25-M SSD (80GB)
Memory: Qimonda DDR3-1066 4 x 1GB (7-7-7-20)
Corsair DDR3-1333 2 x 2GB (7-7-7-20)
Video Card: eVGA GeForce GTX 280
Video Drivers: NVIDIA ForceWare 180.43 (Vista64)
NVIDIA ForceWare 178.24 (Vista32)
Desktop Resolution: 1920 x 1200
OS: Windows Vista Ultimate 32-bit (for SYSMark)
Windows Vista Ultimate 64-bit
SYSMark, Photoshop & Video Encoding Performance   Next Page

 
  Index

Tools Share
Find lowest prices Find the lowest prices
Digg   del.icio.us   E-mail  
Print This Article Print this article  

95 Comments - Last by red77star, 153 days ago
Username:
Password:
Great article! by A5, 256 days ago
This kind of thing (and the motherboard round-ups that used to be here) were the reasons I came to AT. If this pans out, I'm definitely building a Lynnfield system to replace my aging Socket-939 rig.

Reply
RE: Great article! by Depeche, 256 days ago
Man thats ancient ... ya I would defiantly wait for the Core i5s. To get a Core i7 just doesn't seem worth it now with the Core i5's coming out.

Reply
RE: Great article! by Samus, 255 days ago
i7 still makes sense if you plan on

a) SLI/CF

b) dual-CPU

c) memory bandwidth intensive tasks (seeding torrents, folding@home, etc) where triple channel makes some sense

d) the need for 6 memory slots

e) something currently purchasable

I also suspect the release of "i5" chips will drive down prices of i7, specifically the i7-920, the most desirable i7. Keeping in mind the i7-920's overclocking ability, it is still much more capable than the "i5" even if you assume the "i5" overclocks as well, because the i7 has Jackson technology active across its entire lineup.

Reply
RE: Great article! by Jabbernyx, 255 days ago
^ This, although for me personally (b) isn't important and I've effectively nerfed (d) by using an EX58-UD3R :P

Reply
RE: Great article! by wifiwolf, 253 days ago
i7 system is too expensive, cpu is also expensive but system is too overpriced.

Reply
RE: Great article! by DJMiggy, 253 days ago
I swear I read that the i7 doesn't support dual CPUs. Maybe that has changed with xeons though or I might just be insane. Probably the latter.

Reply
RE: Great article! by faxon, 253 days ago
yea i would wait man. i upgraded from my 939 rig to an e5200 and now i have a Q9650 @ 4GHz @ 1.296vcore. given the performance benchmarks, even a 3.7ghz lynnfield will probably outperform my 4GHZ quad in games

Reply
RE: Great article! by nuudles, 253 days ago
I agree, great article!

I also have only an an old s939 rig (opteron 150 - so i am still in the single-core world), and I also suspect this is the one I have been waiting for:)

I initially thought I would wait a bit longer till the 32nm parts come out (damn Intel for their tick-tock), but since the first 32nm parts will be more mainstream (2C/4T) where the Lynnfields are high-end mainstream (or whatever its called) I think the 2.8 Lynnfield would suit me nicely for the next 3-4 years.



Reply
RE: Great article! by philosofool, 190 days ago
As a bonus, if you buy into LGA 1156 now, you will probably be able to get a considerable upgrade in 2 years just by replacing the CPU. The LGA 1156 socket should last awhile, at least as long as LGA 775, but maybe longer, because the memory controller was the big reason for a new socket.

Reply
Great Article! by Depeche, 256 days ago
By the time I got the i7 the i5 comes out and when I finally get the i5 some other series comes out. I can't keep up :)

Get these CPUs in the Bench Beta :P

Reply
Comments Page 1 of 10

Unlicensed Software at Your Last Company
Anonymously Report Unlicensed Software with Our Form Now. Get Up to $1 Million.
We Buy Laptop and PC Memory! Sell to Us!
Min of 25 pieces required. Call us today at 239.354.1230.
Special Offer from The Economist
Get 12 issues of The Economist for $12. US subscribers only.
Free Forrester Risk Management Report
Demystifying Enterprise Risk Management. Download Free With Registration.
Download Microsoft Visual Studio ® Team System
Streamline Dev processes, Reduce time to market. Try Microsoft Visual Studio Team System, FREE!




Latest news by
DailyTech

 February 9, 2010

Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank

 February 8, 2010

Blank


more CPU & Chipset Discussions



pipeboost
Copyright © 1997-2010 AnandTech, Inc. All rights reserved. Terms, Conditions and Privacy Information.
Click Here for Advertising Information