3D Rendering

3dsmax 5.1

WorldBench includes two 3dsmax benchmarks using version 5.1 of the popular 3D rendering and animation package: a DirectX and an OpenGL benchmark.

Discreet 3ds Max 5.1 (DirectX)

Discreet 3ds Max 5.1 (OpenGL)

3dsmax 6

For the next 3dsmax test we used version 6 of the program and ran the SPECapc rendering tests to truly stress these CPUs. Since there's not much new to report here we're only going to report the Rendering Composite score.

Discreet 3ds max 6 (OpenGL) - SPECapc Rendering Composite

Gaming Workstation Application Performance
Comments Locked

42 Comments

View All Comments

  • pplapeu - Wednesday, November 17, 2004 - link

    why do you no longer overclock?

    you know users will do that. What if this processor was dialed up 10%, it would clock at 4.18Ghz and could run faster. I think the performance tales would be far different.
  • Staples - Monday, November 15, 2004 - link

    Well the CEO did step down a few days ago. I hope we see better management soon. This is an embarrasment for Intel. Ever since the A64 came out, Intel has been releasing backseat products.
  • IntelUser2000 - Monday, November 15, 2004 - link

    No, its that most of you guys are AMD biased. Say Intel does release a high-performing Pentium M architecture based chip. Then you guys will just shut up and say nothing else. If AMD comes with 5% performance lead, AMD is thought of as GOD or something. Probably even greater. And about BTX, Pentium M does run pretty cool, but at 21W, that was equal to initial 0.18 micron P3's. Actually some of the DESKTOP P3's had ~15W TDP. I heard 286's and 386's had less than 5W TDP. Cooler, and faster is always better. Granted you may not need as much if your processor runs hotter, but still its necessary. It's also mentioned that since quiet PCs are gaining popularity, BTX can help a lot since it will allow graphics cards to have smaller fans.

    Another 3.8GHz P4 link: http://www.tomshardware.com/cpu/20041115/index.htm...

    Quite contrary to their 3.6GHz throttling article, they seem positive towards 3.8GHz P4.
  • fawifewaewaf - Sunday, November 10, 2013 - link

    diaff cretin
  • mlittl3 - Monday, November 15, 2004 - link

    #35,

    Do you know that the long post of #21 is the author of the article you just read (which is way longer than any post) and the owner of Anandtech? Do you see the post is from ANAND Lal Shimpi? And that his post was in response to the other long post which Anand saw as important enough to respond to.

    I enjoy all the comments on this site, long and short. It gives readers a sort of "behind the scenes" look at hardware and software. I think there should be no restrictions as it currently stands.

    Keep 'em coming. Go Anandtech :)
  • bob661 - Monday, November 15, 2004 - link

    Based on #32's link, it would seem that the P4's would decrease in performance during sustained use with an average user. So unless you're an enthusiast, you would not see the full performance of any of the new P4's.
  • Alphafox78 - Monday, November 15, 2004 - link

    There should be a size limit on posts...
  • GTMan - Monday, November 15, 2004 - link

    Does the EDB functionality lower system performance when it is turned on?
  • Auteur - Monday, November 15, 2004 - link

    #12:

    The only reason HardOCP uses DVD2AVI in their bench marking suite is its the only Divx front end that runs faster on AMD cpu's than Intel's. Its a dead app (the author no longer updates it) that can't IVTC, deinterlace, clean or sharpen video. Its great for demuxing audio and thats it.

    Intel's chips dominate when you use the popular front ends like AutoGK, Gordian Knot or Xmpeg. Read Doom9's forum if you don't believe me.
  • langles - Monday, November 15, 2004 - link

    Did you read the article at Tom's Hardware this weekend about the thermal issues with the Pentium 4 3.6 GHz?

    http://www.tomshardware.com/cpu/20041114/index.htm...
    "The Heat Can Cause Intel's P4 To Throttle And Damage Over Time"

    I would expect that this issue is even worse for the 3.8 GHz.

Log in

Don't have an account? Sign up now