EVGA X79 Dark Review

by Ian Cutress on 10/23/2013 10:00 AM EST
POST A COMMENT

22 Comments

Back to Article

  • DanNeely - Wednesday, October 23, 2013 - link

    How solidly anchored is the 24pin ATX socket, and how stiff is the board itself? I've always assumed the reason I've never seen a sideways version of one was that the thickness and stiffness of the cable meant that if used in cases with behind the board cabling or that had limited space in front of the board would result in excess torque being applied. Reply
  • kolemunky - Wednesday, October 23, 2013 - link

    board is made of good quality material( stiff) and 24 pin is securely attached, but its location makes it very difficult for removal unless the board is removed from the case. Ive had this board since launch and can verify that the bios situation is as bad as the reviewer states. 2.07 does fix some of the overclocking bugs, but there are other issues that still persist. disabling marvell raid ports disables USB 3.0 ports. ? I have 4 ssds setup as a bootable raid-0 and have had it fail 3 times, once randomly, 2 others after updating the bios, 2.04, 2.07. considering this tech has been around 2 years , I don't see how they couldn't get this board rock solid day one. There are no features on the board that justify the price tag. Raid performance on marvell ports is abysmal. USB ports have serious issues. RIVE is a better buy and a better performer. I have already sold this board and am waiting for the RIVE black. I would advise anyone on picking up this board to look elsewhere. One look in the forums and you will understand why. Reply
  • DanNeely - Wednesday, October 23, 2013 - link

    I'm not surprised about installing the cable being a pain; in smaller/older cases even the angled sata ports can be a problem. Reply
  • Flunk - Friday, October 25, 2013 - link

    I can attest to that. I used to use a SilverStone SUGO SG-03 for a SLI setup. Any angled connectors on the board are evil and should be expunged. Its less of an issue on an EATX board because the required cases are enormous but still annoying. Reply
  • DanNeely - Friday, October 25, 2013 - link

    The angled sata connectors are due to SLI/xFire on ATX/mATX boards; because there's not enough space near the southbridge to fit them in somewhere they're not at risk of being blocked by longer cards. Reply
  • CecileWamsley - Monday, October 28, 2013 - link

    My Uncle Julian got metallic MINI Cooper Clubman just by some part time working online with a macbook air... visit their website... http://smal.ly/8wUo2 Reply
  • garnetandblack - Wednesday, October 23, 2013 - link

    This review is spot on. Great hardware, for the most part - troubling bios.

    EVGA's previous x79 boards were just as bad (if not worse) in this regard.
    Reply
  • warezme - Wednesday, October 23, 2013 - link

    Troubling to hear. I have always bought EVGA boards, usually the latest releases when I build a new system. Their boards are usually solid well built and their technical support and return policy are the best. You call and get to speak with real people. Reply
  • iamkyle - Wednesday, October 23, 2013 - link

    eVGA's last solid board was the X58 classified. Everything has gone downhill since then and I can't understand why. Reply
  • JellyRoll - Thursday, October 24, 2013 - link

    They lost Shamino :) They should have never let him go. Reply
  • Gen-An - Thursday, October 24, 2013 - link

    Yep. Mr. Peter Tan was the reason why the X58 EVGA boards were so good, but once Asus got him, it was all over. Reply
  • DarkStryke - Friday, October 25, 2013 - link

    They lost almost the entire motherboard engineering team to Sapphire like two years ago, and Shamino / Tan moved to ASUS. Their boards have been mediocre since, living off the hype fumes of the X58 glory days when they were one of the best boards out there. Reply
  • fluxtatic - Friday, October 25, 2013 - link

    Interesting, as I was sort of under the impression that Sapphire had bailed back out of the motherboard market again a while back. I picked up a Sapphire Pure E-350 a couple years ago, as it was the right combination of price and features (even though documentation and support were fairly awful.) It's been a solid board, running my home file server. Last I looked, though, there were no Sapphire boards to be found. Maybe they just bailed on the US market? Reply
  • jasonelmore - Friday, October 25, 2013 - link

    sapphire still makes AMD Graphics cards, and i'm sure they were recruited for them and not their motherboards lol. Reply
  • itchyartist - Wednesday, October 23, 2013 - link

    good look for this motherboard Reply
  • powruser - Thursday, October 24, 2013 - link

    Crazy that they're asking $400 for this board. No ALC1150? ... Really? It's not like X79 is a brand new chipset, they've had plenty of time to figure out how to make a proper motherboard. Disappointing to say the least. Reply
  • defiler99 - Thursday, October 24, 2013 - link

    I bought one of these and had nothing but trouble with it, despite using three different sets of RAM, etc, etc. I came to the conclusion that the board just wasn't ready to go, and got an ASUS X79-DELUXE instead. So far, working 1000% better. Reply
  • P4spooky - Friday, October 25, 2013 - link

    Not to mention $50 cheaper! Shame the hardware looks impressive but don't have time to mess around with buggy bios issues. Reply
  • jasonelmore - Friday, October 25, 2013 - link

    i dropped EVGA a couple of years ago and went to Asus simply because of their Custom PCB Video cards, and awesome motherboards.. EVGA was great, but they lacked a lot of custom and high performance components. All of their graphics cards were basicly a refrence design with a evga sticker.

    Here recently, they've heard the outcry and started making custom coolers, and maybe 1 or 2 custom pcb cards, but their engineering department pales in comparison to Asus's.

    EVGA does win in the warranty and customer service departments. I loved that about evga, however i would have to rma my cards about once a year due to failing components. Now since i've went to custom pcb cards with better cooling and better parts, i haven't had to RMA once.. And if i ever have to RMA with Asus, i dread it, because they're customer support is awful.
    Reply
  • Flunk - Friday, October 25, 2013 - link

    I can't see why anyone would buy this. EVGA might be a top-tier video card supplier but their motherboards are seriously unproven and generally problematic. Unless they prove a real cut-rate price I can't see sales coming their way. And even that, in the high-end, probably doesn't matter. I would literally pay $150 more for the Rampage Formula than for this. Reply
  • mapesdhs - Friday, October 25, 2013 - link


    Alas I have to agree. Seems odd to release a board like this now which has so many
    problems when there are alternatives such as the awesomely reliable and easy to use
    range from ASUS which won't cause any grief. You mentioned the Formula; there's
    also the Extreme, though I bought the P9X79 WS which has identical functions as
    regards oc'ing, etc. I had no problems getting mine to 4.7 with a 3930K, 64GB RAM
    @ 2133, _four_ GTX 580 3GB cards, several SSDs, disks, etc. See:

    http://valid.canardpc.com/zk69q8

    And I haven't remotely finished pushing the CPU oc yet.

    It's a pity, I do some have nice older EVGA boards, but this release seems so out of whack.

    Ian.
    Reply
  • wakuritz - Monday, October 28, 2013 - link

    Not nit-picking, just pointing out the grammatical error in the 2nd paragraph, last sentence (manufacturer<manufactures): "A BIOS is always just ones and zeroes, and it is up to the company who manufacturer the motherboard to get the BIOS to work first time, even on the simple stuff."

    Good review, as expected. Thanks, Ian.
    Reply

Log in

Don't have an account? Sign up now