• What
    is this?
    You've landed on the AMD Portal on AnandTech. This section is sponsored by AMD. It features a collection of all of our independent AMD content, as well as Tweets & News from AMD directly. AMD will also be running a couple of huge giveaways here so check back for those.
    PRESENTED BY
POST A COMMENT

13 Comments

Back to Article

  • Mugur - Monday, March 12, 2012 - link

    Hopefully they will also eliminate the usual Battlefield 3 bug with game not responding when level starts that I thought I was free of until I installed 12.1... :-) Reply
  • chizow - Monday, March 12, 2012 - link

    Looks like SGSSAA DX10/11 support is still limited to 7-series parts only. Has AMD commented on why they aren't bringing that support to older gen parts as well? I know its tied to AAA, which older VLIW parts lack in DX10/11 as well, but it shouldn't be a result of any hardware limitation.

    Nice to see they finally got a WHQL driver out for the 7-series anyways.
    Reply
  • Crazyeyeskillah - Monday, March 12, 2012 - link

    have you ever tried to use SSAA? It tanks your fps to about 20% of what you would normally get with 1920x1080. Honestly, 6xxx cards can't even use it in new dx10/11 titles to make them playable. I have 2 7970s in crossfire and I can only use it on a few games at 2560x1600. It is that demanding. Even at that I can't go over 4x ssaa or it becomes unplayable under 30fps.

    You comment is like saying, "why can't i play crysis on my igp circa 2007 maxed out"
    Reply
  • Glibous - Monday, March 12, 2012 - link

    Whether VLW4/5 parts can handle SSAA in every game with playable FPS is irrelevant, Chizow was asking if the lack of SSAA in DX10/11 modes is due to architectural changes between VLW and GCN or if AMD is omitting that feature from previous parts as a selling feature. I think it's a very valid question. Because you have $1000 to burn on expensive parts doesn't mean you can troll.

    P.S. Use the "REPLY" button in the future. THANKS! :)
    Reply
  • SunLord - Monday, March 12, 2012 - link

    Given it's probably useless/unplayable at realistic resolutions for anyone save for maybe people with tri/quad-crossfire 6970s or 2x6990s it' likely not worth the trouble to get it working even if it was mostly compatible with VLW the driver/software team has more important things to focus on for now. Reply
  • kyuu - Monday, March 12, 2012 - link

    Regardless of whether or not it is feasible to use SSAA in modern titles with a single 6xxx or whatever card, whether or not it can be supported in previous gen cards is still a valid question. Hell, you can't really use it in the latest titles at 1080p+ on 7xxx-series cards either without an Xfire solution, so by your guys' reasoning, it doesn't make sense for them to enable support even on the new cards.

    Also, it can be used to pretty up older titles that aren't very demanding for newer cards. In fact, that may be the only point it really has considering the performance cost.
    Reply
  • chizow - Monday, March 12, 2012 - link

    Hi yes I've used the feature even on much slower Nvidia hardware (GTX 280 SLI), and no its not that demanding especially with 2-3 card configs at 1080p. 5850 in CF should be able to handle SGSSAA just fine in many DX10 games given DX10 is going on 5 years the option is certainly welcome for older titles especially.

    DX11 games will be hit or miss, but turning down the most demanding features like DoF, HBAO, and Tesselation should allow for good performance with SGSSAA.
    Reply
  • Sufo - Tuesday, March 13, 2012 - link

    Indeed. I have a 5850 xfire setup and I just started Mass Effect 1 (a game with no native AA support) and it runs just fine with 4x SSAA (always above 60fps). I'm using radeonpro to achieve this. Reply
  • destey - Monday, March 12, 2012 - link

    Wish they would enable dynamic power by default.

    echo "dynpm" > /sys/class/drm/card0/device/power_method

    Doesn't work for me. The other methods seem like a headache.
    Reply
  • haplo602 - Tuesday, March 13, 2012 - link

    you are talking about OSS drivers. this article is related to the binary blob.

    btw dynpm causes frame blinking on my 5830 under wine.
    Reply
  • dananski - Monday, March 12, 2012 - link

    I got these drivers fresh on Sunday morning to find weird grey squares all over Skyrim. I'm not the only one: http://forums.steampowered.com/forums/showthread.p... Reply
  • N1bble - Tuesday, March 13, 2012 - link

    I've got an Asus p5k pro motherboard with PCIe 1.0 or 1.1. (GPU-Z says 1.1, manual says simply PCI-e x16)

    Does this test prove that the cards will work on PCIe 1.x or could there be other issues since PCIe 3.0 isn't fully compatible to 1.x?
    Reply
  • N1bble - Tuesday, March 13, 2012 - link

    Sorry, posted under the wrong article, but maybe someone can answer the question anyway :) Reply

Log in

Don't have an account? Sign up now