400-450W PSU Roundup
by Christoph Katzer on November 6, 2007 4:00 AM EST- Posted in
- Cases/Cooling/PSUs
Ultra DC Outputs
If our earlier comments seemed derogatory, you can now see the reason why. Obviously, this type of power supply will not withstand modern test methodologies. Every rail except the 12V rail falls far out of spec before we even reach 300W of load. This is the worst result we have seen so far, and we could see that there is no Under Voltage Protection installed since we measured just 2.6V on the 3.3V rail. You might be able to use this power supply in a budget system, but we would even hesitate to use it there.
Efficiency
Efficiency results are not the best either. Ultra achieves a maximum 75% efficiency, but with increasing loads it rapidly drops below 70%.
Ripple & Noise Results
| Ultra V-Series 400W | ||||
| PSU Load | 3.3V | 5V | 12V1 | Wattage All Rails |
| 10% | 1.34A | 2.24A | 1.95A | 41W |
| 20% | 2.68A | 4.47A | 3.90A | 73W |
| 50% | 6.71A | 11.18A | 9.76A | 198W |
| 80% | 10.73A | 17.89A | 15.61A | 308W |
| 100% | 13.42A | 22.36A | 19.51A | 378W |
| 110% | 14.76A | 24.60A | 21.46A | 411W |
If our earlier comments seemed derogatory, you can now see the reason why. Obviously, this type of power supply will not withstand modern test methodologies. Every rail except the 12V rail falls far out of spec before we even reach 300W of load. This is the worst result we have seen so far, and we could see that there is no Under Voltage Protection installed since we measured just 2.6V on the 3.3V rail. You might be able to use this power supply in a budget system, but we would even hesitate to use it there.
Efficiency
Efficiency results are not the best either. Ultra achieves a maximum 75% efficiency, but with increasing loads it rapidly drops below 70%.
Ripple & Noise Results
Facebook
Twitter
RSS
37 Comments
View All Comments
opterondo - Sunday, November 18, 2007 - link
You all do understand that a 1000w PSU doesn't use 1000w right?For instance you hook up 333w peak load worth of components to it it will use ~333w.
The only reason to buy a smaller capacity PSU is up front price and possibly better AC-DC conversion efficiency (like maybe 70% instead of 60%)
opterondo - Sunday, November 18, 2007 - link
Good thing they didn't review any of the COOLMAX PSUs cause they are fairly priced and out perform most any in this article.COOLMAX CX-400B ATX v2.01
COOLMAX CP-500T EPS12V
COOLMAX CXI-500B ATX12V
COOLMAX CUG-700B ATX 12V( V.2.2)
mindless1 - Thursday, November 15, 2007 - link
Months ago I was almost given a vacation in the forums because of shills and naive owners that wouldn't accept my negative comments about Ultra V-Series. I feel a bit vindicated and yet the review didn't even touch in it's primary weakness, poor capacitors leading to poor lifespan even in a system it would be suited to run in.I do have to disagree about one aspect of the review in that the Ultra does have PFC just not active or APFC, and an "old" passive PFC design is not a big deal, a PSU can run fine w/o AFPC and historically there were plenty of decent, not just cheap, PSU with passive PFC evidenced by the input voltage selection switch.
Also in the reviews, please mention the fans' make model and bearing(s) type as they are also weak links when cheap sleeve-bearing types are used.
Kougar - Friday, November 9, 2007 - link
On many of the pages I am seeing empty image placeholders that link to 0x0 pixel images that are 1.5KB in size... someone might want to fix that. :)Christoph Katzer - Friday, November 9, 2007 - link
Working fine here ;)Kougar - Wednesday, November 14, 2007 - link
Do you work for Anandtech???Since an image is worth a thousand words: http://i111.photobucket.com/albums/n129/Chanur64/M...">Image Link
The "missing" ghost image placeholder shows up for every PSU info page.
Christoph Katzer - Thursday, November 15, 2007 - link
Oh yep thanks. Now it's working.grantschoep - Thursday, November 8, 2007 - link
Low end power supplies?I want to to know who the heck needs a 500+ watt power supply that isn't running some crazy dual SLI setup. I really wish power supply makers would focus on quite and very stable/clean voltages.
I wish companies would really focus on very high quality low end systems. 98% of us don't need a 500+ watt power supply. 90% of us don't need a motherboard with as much crap as they tack on(2 1gig network ports for example)
As an electrical engineer, 1 US dollar extra.... could by much better caps and the like.
Heck as a further annoyance, when company A has a PSU fan that is better/quiter than another, why go whit the lesser
I really wish that companies would focus on this. I don't need a 1 KW beast. I want a good, high quality ~450 watt supply that is nice and quite.
erple2 - Thursday, November 8, 2007 - link
I am a bit saddened by the (IMO) relatively unimportant temperature of the heatsinks, or sound ouput. IMO, the single most important measurement of the usefulness of a power supply is, in fact, it's ability to supply power.I would equate evaluating it's value on thermal and acoustic characteristics to evaluating the superiority of a GFX card on it's thermal characteristics. For that effect, my old Matrox Millenium card destroys an 8800GTX.
Seriously, I'd really like to see much more in-depth analysis and evaluation on the stability of the power generation, the cleanliness of the signal, the resistance to sagging based on varying the power requirements, etc.
I understand that acoustics and thermals are important, but they're really secondary to the actual performance of the power generation. If you're overly concerned with the loudness of a power supply, or how hot it gets, instead of the actual performance of the power supply, then maybe you shouldn't be using a computer..
Christoph Katzer - Friday, November 9, 2007 - link
Did you just read the comparison or?