Intel Storage Platforms for the NAS Market

The higher end segment of the SOHO / SMB NAS market uses Intel's Core-series and Xeon CPUs to deliver the required performance while supporting a large number of drive bays (typically more than 8, in a rackmount form-factor). Those are not the subject of discussion in this article. Over the last four years or so, Intel's play in the other tiers has been mainly with its Atom CPU lineup. A little bit of history gives us some perspective.

History

In 2010, Intel launched the first Atom-based storage platform (codenamed 'Bandon'), combining a D410 or D510 processor with the 82801R I/O controller (belonging to the ICH9 family). It was capable of supporting up to 6 drive bays, and we even reviewed LaCie's offering (5big Storage Server) using this platform. The Atom D410 / D510 were both based on the Bonnell microarchitecture (coming under the Pineview codename). Later in the year, Intel also pushed out updated Atom CPUs (D425 / D525) with slightly higher base frequencies for use with the storage platform. The QNAP TS-659 Pro II was one of the Atom D525-sporting NAS units that we reviewed.

Pineview (45 nm) was followed by Cedarview (32 nm) in late 2011. It was still based on the Bonnell microarchitecture, but offered higher clock speeds and better performance per watt. Almost a year later, the official storage platform (codenamed 'Milstead') announcement with the Atom D2550 (followed by the D2700) and the 82801JB I/O controller (belonging to the ICH10 family) was made. The focus was on the improved graphics capabilities and HDMI output, which enabled interesting new use-cases related to media playback and surveillance video. LaCie's 5big NAS Pro and the Synology DS1812+ were some of the NAS units that we reviewed in this family.

Between the rollout of products based on the Bandon and Milstead platforms, the NAS market for home consumers and power users started experiencing rapid growth. This market demanded a different set of features compared to SMB requirements. NAS vendors had to provide extensive multimedia support (not in terms of playback on a display, but the ability to manage and stream content). Being a cost-sensitive market, vendors were loath to use a two-chip solution (main CPU + I/O controller hub). Towards serving this market, Intel decided to re-purpose their Berryville CE processor (a 32nm SoC with two Bonnell-based Atom cores as the host CPU) which originally targeted the STBs. For storage solutions, these CE 53xx chips were relaunched in their Evansport avatar and pitched as a media server platform. The CE 53xx SoCs also happened to have a H.264 encoder in addition to a multi-format decoder (giving it the capability to act as a transcoder). We have been pretty bullish on Evansport, having reviewed devices from all of Intel's announced partners (Asustor, Synology and Thecus).

Silvermont into the Picture

In moving from 32nm to 22nm, Intel completely revamped the microarchitecture for their Atom cores. Bonnell was replaced by Silvermont, bringing out of order execution and other improvements into the picture. With so many code names associated with Silvermont-based products, we thought it would be best to present a bulleted list indicating the markets which Intel hopes to address with each of them.

  • Bay Trail
    • Bay Trail-T: Atom Z36xx and Z37xx series for tablets
    • Bay Trail-M: Pentium and Celeron branding (N-series) for notebooks and AIOs
    • Bay Trail-D: Penitum and Celeron branding (J-series) for desktops
    • Bay Trail-I: Atom E38xx for the embedded market
  • Merrifield
    • Atom Z34xx: Low-end to mid-range smartphones
  • Moorefield
    • Atom Z35xx: Premium smartphones
  • Avoton
    • Atom C2xx0: Microservers and cloud storage
  • Rangeley
    • Atom C2xx8: Network and communication infrastructure

From our analysis of the various products, we believe the highlighted ones make sense for the NAS market. While the suitability of the Avoton and Rangeley for the NAS market is without question (they have a large number of SATA ports and PCIe lanes integrated into the SoC), the Bay Trail-D parts are quite interesting.

The various possible components in a Bay Trail SoC are given in the diagram below.

Depending on the target market (as specified in the bulleted list above), some of the components in the above block diagram are cut out. For example, Bay Trail-T does away with the SATA and PCIe lanes. Bay Trail-D is more interesting to us in this article, as the QNAP TS-x51's Celeron J1800 belongs to that family.

Introduction QNAP Goes Bay Trail
Comments Locked

49 Comments

View All Comments

  • ganeshts - Monday, June 23, 2014 - link

    In a comment on another recent article, one of the readers stressed that deinterlacing is broken in the Linux drivers for the iGPU. I will check on the status with a review sample
  • DanNeely - Sunday, June 22, 2014 - link

    Two questions, the first is a repeat from the initial announcement a week ago. What virtualization platform/virtual drive container format(s) is supported?

    The second is, why assume the additional USB3 is done by consuming a PCIe lane instead of by sticking a USB3 hub onboard as is common with current generation motherboards.
  • modulusshift - Sunday, June 22, 2014 - link

    It would consume a PCIe lane either way. He's talking about total lanes from the CPU, not just the number a motherboard would expose like on normal desktops.
  • ganeshts - Monday, June 23, 2014 - link

    I am not sure I understand the question entirely, Dan.

    Are you saying that current generation mobos have the ability to make a single USB 3.0 port from the PCH appear as multiple USB 3.0 ports on the board, i.e, is there a 'USB 3.0 port multiplier' that you are talking about?

    As modulusshift indicates, most of the NEC / Fresco Logic / ASMedia based USB 3.0 ports that I see in the motherboards all communicate with the PCH using a PCIe lane.
  • DanNeely - Monday, June 23, 2014 - link

    Yes. A lot of the current generation of boards offering 8 or more USB3 ports that have been reviewed on this site recently are being called out for using a cheaper USB3 hub chip (like what would be inside a 2/4 port USB3 hub on your desk) instead of a PCIe-USB3 chip like in the previous generation.

    4 of 5 mobo reviews on the front and second page call the board out for using at least on hub to add USB3 ports, just search the first page of the review for the word hub (the 5th only had 6 ports and presumably didn't need one):
    http://anandtech.com/show/8045/asrock-z97-extreme6...
    http://anandtech.com/show/7965/asus-z97-deluxe-nfc...
    http://anandtech.com/show/7966/msi-z97-mpower-max-...
    http://anandtech.com/show/7964/gigabyte-z97x-ud5h-...
  • ganeshts - Monday, June 23, 2014 - link

    Got it! Let me see what QNAP comes back with, and I will update the article accordingly.
  • DanNeely - Monday, June 23, 2014 - link

    Not a problem. This is something fairly new; and unfortunately appears to be occurring at all pricepoints. I'm mostly ok with doing it on budget boards; but for higher end ones I'd much rather have the option of a 2:4 or 4:8PCIe lane PLX and PCIe-USB3 controllers powering all the ports, rather than have to worry about where I connect high bandwidth devices in the future to avoid bottle-necking. I'm really hoping skylake's chipset will have enough native usb3 ports to make this generation's designs a one off aberration.
  • ganeshts - Wednesday, June 25, 2014 - link

    Dan,

    Virtualization answers from QNAP: OVA, OVF, QVM, XML, VMX.

    Confirmed that an USB 3.0 hub chip is being used

    SATA - PCIe bridge list update in the article.
  • extide - Monday, June 23, 2014 - link

    No, if you used a USB 3.0 HUB then it would not use a PCIe lane, and that would leave you with two PCIe x1 lanes, so you could add two controllers (ex for the 8-bay you would need a 4-port and a 2-port).
  • name99 - Sunday, June 22, 2014 - link

    I find the premise of the article ("Intel Quick Sync Gets its Killer App") to be quite bizarre.
    In the Apple world, QuickSync has had its killer app for some time supporting remote desktops and video sent from a Mac to an AppleTV. For remote desktops in particular, while this was previously done with software encoding, the lowered latency of QuickSync makes a noticeable difference to the usability if you're connected via a high bandwidth connection. I expect there are substantially more people using OSX ARD than will ever buy this particular NAS.
    There are probably similar use cases happening on Windows, but I don't know much about that side of the fence.

    My point is not to criticize the NAS or talk up OSX; it's simply to point out that the article subtitle is more than a little ridiculous, suggesting, as it does, that poor little QuickSync was just out there languishing in the world with everyone ignoring it until this NAS came along and showed the world how to utilize it.

Log in

Don't have an account? Sign up now