Earlier today NVIDIA announced G-Sync, its variable refresh rate technology for displays. The basic premise is simple. Displays refresh themselves at a fixed interval, but GPUs render frames at a completely independent frame rate. The disconnect between the two is one source of stuttering. You can disable v-sync to try and work around it but the end result is at best tearing, but at worst stuttering and tearing.

NVIDIA's G-Sync is a combination of software and hardware technologies that allows a modern GeForce GPU to control a variable display refresh rate on a monitor equipped with a G-Sync module. In traditional setups a display will refresh the screen at a fixed interval, but in a G-Sync enabled setup the display won't refresh the screen until it's given a new frame from the GPU.

NVIDIA demonstrated the technology on 144Hz ASUS panels, which obviously caps the max GPU present rate at 144 fps although that's not a limit of G-Sync. There's a lower bound of 30Hz as well, since anything below that and you'll begin to run into issues with flickering. If the frame rate drops below 30 fps, the display will present duplicates of each frame.

There's a bunch of other work done on the G-Sync module side to deal with some funny effects of LCDs when driven asynchronously. NVIDIA wouldn't go into great detail other than to say that there are considerations that need to be taken into account.

The first native G-Sync enabled monitors won't show up until Q1 next year, however NVIDIA will be releasing the G-Sync board for modding before the end of this year. Initially supporting Asus’s VG248QE monitor, end-users will be able to mod their monitor to install the board, or alternatively professional modders will be selling pre-modified monitors. Otherwise in Q1 of next year ASUS will be selling the VG248QE with the G-Sync board built in for $399, while BenQ, Philips, and ViewSonic are also committing to rolling out their own G-Sync equipped monitors next year too. I'm hearing that NVIDIA wants to try and get the module down to below $100 eventually. The G-Sync module itself looks like this:

There's a controller and at least 3 x 256MB memory devices on the board, although I'm guessing there's more on the back of the board. NVIDIA isn't giving us a lot of detail here so we'll have to deal with just a shot of the board for now.

Meanwhile we do have limited information on the interface itself; G-Sync is designed to work over DisplayPort (since it’s packet based), with NVIDIA manipulating the timing of the v-blank signal to indicate a refresh. Importantly, this indicates that NVIDIA may not be significantly modifying the DisplayPort protocol, which at least cracks open the door to other implementations on the source/video card side.

Although we only have limited information on the technology at this time, the good news is we got a bunch of cool demos of G-Sync at the event today. I'm going to have to describe most of what I saw since it's difficult to present this otherwise. NVIDIA had two identical systems configured with GeForce GTX 760s, both featured the same ASUS 144Hz displays but only one of them had NVIDIA's G-Sync module installed. NVIDIA ran through a couple of demos to show the benefits of G-Sync, and they were awesome.

The first demo was a swinging pendulum. NVIDIA's demo harness allows you to set min/max frame times, and for the initial test case we saw both systems running at a fixed 60 fps. The performance on both systems was identical as was the visual experience. I noticed no stuttering, and since v-sync was on there was no visible tearing either. Then things got interesting.

NVIDIA then dropped the frame rate on both systems down to 50 fps, once again static. The traditional system started to exhibit stuttering as we saw the effects of having a mismatched GPU frame rate and monitor refresh rate. Since the case itself was pathological in nature (you don't always have a constant mismatch between the two), the stuttering was extremely pronounced. The same demo on the g-sync system? Flawless, smooth.

NVIDIA then dropped the frame rate even more, down to an average of around 45 fps but also introduced variability in frame times, making the demo even more realistic. Once again, the traditional setup with v-sync enabled was a stuttering mess while the G-Sync system didn't skip a beat.

Next up was disabling v-sync with hopes of reducing stuttering, resulting in both stuttering (still refresh rate/fps mismatch) and now tearing. The G-Sync system, once again, handled the test case perfectly. It delivered the same smoothness and visual experience as if the we were looking at a game rendering perfectly at a constant 60 fps. It's sort of ridiculous and completely changes the overall user experience. Drops in frame rate no longer have to be drops in smoothness. Game devs relying on the presence of G-Sync can throw higher quality effects at a scene since they don't need to be as afraid of drops in frame rate excursions below 60 fps.

Switching gears NVIDIA also ran a real world demonstration by spinning the camera around Lara Croft in Tomb Raider. The stutter/tearing effects weren't as pronounced as in NVIDIA's test case, but they were both definitely present on the traditional system and completely absent on the G-Sync machine. I can't stress enough just how smooth the G-Sync experience was, it's a game changer.

The combination of technologies like GeForce Experience, having a ton of GPU performance and G-Sync can really work together to deliver a new level of smoothness, image quality and experience in games. We've seen a resurgence of PC gaming over the past few years, but G-Sync has the potential to take the PC gaming experience to a completely new level.

Update: NVIDIA has posted a bit more information about G-Sync, including the specs of the modified Asus VG248QE monitor, and the system requirements.

NVIDIA G-Sync System Requirements
Video Card GeForce GTX 650 Ti Boost or Higher
Display G-Sync Equipped Display
Driver R331.58 or Higher
Operating System Windows 7/8/8.1

Comments Locked

217 Comments

View All Comments

  • mdrejhon - Tuesday, October 22, 2013 - link

    Also -- motion blur should be 100% natural and 100% artistic. Programmable variable-persistence displays is a good step towards this ultimate goal.

    Today's non strobed displays will never have perfect motion clarity, until there's a breakthrough for the low-persistence zero flicker display that allows fast-panning images (when the app creator wants it) to be as perfectly sharp as a piece of paper going sideways. Also, when wearing virtual reality headsets, turning your head creates panning. Panning creates motion blur on ALL flickerfree display technologies (even instant-GtG displays). So the person can't focus on objects while turning their head. nonstrobed OLED / nonstrobed discrete-LED-arrays doesn't fix the blur problem. Michael Abrash is wishing for a 1000Hz VR headset because of this problem:

    http://blogs.valvesoftware.com/abrash/down-the-vr-...

    So, strobing is a simpler method (for now).
  • wojtek - Tuesday, October 22, 2013 - link

    No, the ultimate resolution for that problem is direct retinal projection http://ftp.rta.nato.int/public/PubFullText/RTO/MP/...
    And there is first attempt already http://reviews.cnet.com/wearable-tech/avegant-virt...
  • mdrejhon - Thursday, October 24, 2013 - link

    Yes, agreed. Retinal project is ultimate, but the all the same stuff I've said still applies _exactly_, full stop. Ultrahigh framerates *or* light modulation (e.g. laser scanning, light modulation, etc). The laser scanning is doing the strobing, CRT style. Nothing new here.
  • mdrejhon - Wednesday, October 30, 2013 - link

    Eizo just released a gaming VA strobe-backlight monitor, the Foris FS2421.
    Here's a white paper on Eizo's method of strobing:
    http://gaming.eizo.com/wp-content/uploads/file/tur...
    Great diagrams.
  • poohbear - Sunday, October 20, 2013 - link

    meh, please shoe me this technology with IPS monitors otherwise who cares. Color quality is king for me and many others. Also, what's stopping AMD from developing something similar for their cards?
  • junky77 - Sunday, October 20, 2013 - link

    I don't get it. Why it has to be 'a card'? Why wasn't some standard developed and applied into the GPU and screens right away. They are selling us another thing which should have been there in the first place.
  • mdrejhon - Tuesday, October 22, 2013 - link

    It has to be a card. There's some really, really, really advanced processing going on.

    -- Advanced LCD overdrive algorithms that changes on the fly
    -- It's hard to have consistent color/gamma at all refresh rates.
    -- Previous monitors, 60Hz vs 120Hz vs 144Hz often had to be calibrated differently
    -- Now imagine trying to make 30Hz through 144Hz dynamically work, with overdrive & keep consistent color.

    I'm betting a lot of the 768MB on the G-SYNC board is probably for a massive 3D lookup table or processing memory to assist in accurate LCD pixel transitions.
  • ninjaquick - Thursday, October 24, 2013 - link

    or 4K 32bpp
  • junky77 - Sunday, October 20, 2013 - link

    The real amazement is that it was not so till now.
  • wrkingclass_hero - Sunday, October 20, 2013 - link

    Seeing so much memory on the board, and hearing about ghosting artifacts from Eurogamer, leads me to believe that G-Sync is just interpolating frames. It would be interesting to see what happens when there are variable frame rates.

Log in

Don't have an account? Sign up now