Assembling the SilverStone Sugo SG09

Part of the "joy" of reviewing small form factor cases is just how much of a royal pain in the neck they can be to put together. In trying to cram all of this hardware into such a small space, elbow room is generally the first thing to go. So while the SG09 supports tower coolers and full-length video cards, other spaces are decidedly much more cramped.

That said, SilverStone was still remarkably considerate when it comes to assembly. Motherboard standoffs are already built into the tray, but you do have to remove the sliding power supply bracket in order to fit a Micro-ATX board in. When you do, you'll also find that the AUX 12V line is going to be much harder to connect than usual, and two of the innermost mounting screws may be next to impossible to actually install. The problem is the close proximity of the 120mm and 180mm fans, a tradeoff made for what you'll see is pretty superior cooling performance.

Drives are mounted into the SG09 using three removable trays behind the motherboard. The topmost one is for mounting two 3.5" drives side by side, and the top 180mm fan actually overhangs this side of the tray just enough to get some cool air flowing. Unfortunately the 3.5" drives are bottom mounted, taking our standard Corsair Link kit out of the running. Meanwhile, just beneath them are four plastic brackets for mounting four 2.5" drives, stacked on top of each other. Finally, slimline optical drives are installed by attaching a mounting bracket included with the case to the drive, then attaching that bracket to the case itself.

Getting the power supply into the case is actually a pretty easy affair. You attach it to the sliding, removable power supply cage, then slide it back in, screw in the cage, and connect the routing cable. For testing I opted to orient the power supply's intake to the front of the case instead of the interior, as this isolates the power supply from the rest of the components while still allowing it to receive fresh air. This also prevents it from competing with the tower cooler for intake air. Installing expansion cards is also simple; there's a covered bracket (I do hate these even though I understand why they exist) that has to be removed, then the ventilated expansion slot covers come out.

Where things generally go to hell with small case designs is cabling, but SilverStone has actually done a reasonably good job allowing for this. The nature of the layout basically forces you to route cables intelligently; there's simply nowhere else to put them. Again, a modular power supply is pretty much essential, especially if you're planning on utilizing 3.5" drives. I do think they could've tried to allow at least a little more space at the top for squeezing all those cables through, though.

Unfortunately, putting the panels back on the SG09 is an exercise in frustration of the very highest order. What SilverStone needed to do was split the wraparound panel to handle just the motherboard and fan side and then make a separate panel for the side behind the motherboard tray. Though SilverStone does allow for a decent amount of space for cabling, it still isn't quite enough, and I had to struggle a lot to get the panel to fit correctly.

There are some design elements that I think are really strong, and then there are some that obviously need work. As I mentioned, the panels need to be split even if it increases complexity a bit, and the single 80mm fan mount seems superfluous and can probably be cut entirely, possibly in favor of using that real estate to mount one or two 3.5" drives laterally. The brackets for mounting the 2.5" drives also seem to be placed too low and you'll be struggling trying to get them installed again. An extra couple of millimeters would make all the difference, even if it meant shrinking the opening for the cooler backplate slightly.

With all that said, though, it's impressive how much you can actually cram into the SG09. I was able to fit our standard case testbed in without any real trouble. Better still, there's potential here for some really stellar performance.

In and Around the SilverStone Sugo SG09 Testing Methodology
Comments Locked

45 Comments

View All Comments

  • lmcd - Sunday, October 21, 2012 - link

    It's hitting $100 pretty much everywhere...
  • lmcd - Sunday, October 21, 2012 - link

    This looks like the perfect case for me: it's nice and compact but I don't have to deal with ITX.* Nice cooling for maybe even CF, and I don't mind noise since I tend to game loudly. As for fans, I'll make sure my nicely-sized mATX board has enough fan headers; shouldn't be too hard. One optical drive is perfect and I don't mind spending a bit extra on it later (might not get it initially though) and will use a cheap external in the meantime (note: a cheap external is around $30 and so the "unbearable" slim drive can easily be mitigated this way).

    *ITX boards with wireless built in tend to be expensive and late to the market, and I need a wireless card, but want discrete graphics. As such, ITX is a no-go for me.
  • extide - Sunday, October 21, 2012 - link

    Check out the ASRock Z77 M-ITX board. It's pretty sweet IMHO and I am dying to do a build with one :)
  • lmcd - Tuesday, October 23, 2012 - link

    I'm actually looking at this for my next build, which should be around the time of Haswell. And I'm interested in maybe even dual-GPU with this case (two 7850-equivalents).
  • piroroadkill - Sunday, October 21, 2012 - link

    Oh dear.

    If you need a premium microATX case, surely there's only one choice, the Fractal Design Define Mini..
  • Orvtrebor - Sunday, October 21, 2012 - link

    I can't believe this is the final product....

    Hideous.

    Someone on another forum that starts with an [H] drew an awesome modified version of this case when the prototype was first shown. Pretty sure it's in the SFF forum.

    It is literally 10x better than this mess.
  • dave1_nyc - Sunday, October 21, 2012 - link

    I forget the model, but several years ago there was one of the Sugo cases that I thought was so nice I was just looking for some reason to build in it, either in the all aluminum version or the steel-with-an-aluminum-front version.

    But honestly, could this thing *be* any uglier.
  • joos2000 - Sunday, October 21, 2012 - link

    The main sacrifices SilverStone made with the Sugo SG09 are understandable ones barring one unusual decision. I understand their preference for slot-loading slimline optical drives from an aesthetic perspective, but it increases build cost for the end user and reduces options substantially.

    There are some rather obvious errors in your reasoning, at least to me.

    First of all, if you are even remotely interested in building a small system, then you are obviously looking at putting the smallest components in there. Having a full height disc player more than doubles, probably triples the volume requirement in the box for what is, in most cases, a completely redundant device in a modern system. So all of a sudden, you go against your requirement of portability and minimalism so you can save a buck on an optical drive? How does that make any sense at all?

    I wouldn't be all surprised if most of the builds based on this box will be without a DVD/BR all together. And yes, I am presuming that pretty much all of the builds based on this case will be LAN gaming systems since it is far, far to ugly to have next to your telly in the living room.

    And when did PC games come delivered in blu-rays anyway? Pretty much all PC games come on DVD's still, so paying through the nose for a blu-ray player for a LAN box just doesn't make sense. At all.

    That's my impression anyway and why I think Silverstone have made the right decision both in slimline form factor and skipping blu-ray's for their gaming systems.
  • EnzoFX - Tuesday, October 23, 2012 - link

    My thoughts exactly as summarized in my original comment =P.
  • tzhu07 - Sunday, October 21, 2012 - link

    Really tacky and plasticty looking. I'll definitely be sticking with Fractal Design cases.

Log in

Don't have an account? Sign up now