AnandTech Storage Bench 2011—Light Workload

Our new light workload actually has more write operations than read operations. The split is as follows: 372,630 reads and 459,709 writes. The relatively close read/write ratio does better mimic a typical light workload (although even lighter workloads would be far more read centric).

The I/O breakdown is similar to the heavy workload at small IOs, however you'll notice that there are far fewer large IO transfers:

AnandTech Storage Bench 2011—Light Workload IO Breakdown
IO Size % of Total
4KB 27%
16KB 8%
32KB 6%
64KB 5%

Light Workload 2011—Average Data Rate

While the 840 didn't shine in our Heavy suite, it definitely takes the crown in our Light suite. The 840 Pro is still faster, obviously, but the 840 is the second fastest SSD we have tested. As the 840 is aimed towards consumers, the Light workload test should be a better indication of overall performance than our Heavy suite.

Light Workload 2011—Average Read Speed

What's rather odd is that the average write speed is over 100MB/s higher than any synthetic write benchmark we ran.

Light Workload 2011—Average Write Speed

Light Workload 2011—Disk Busy Time

Light Workload 2011—Disk Busy Time (Reads)

Light Workload 2011—Disk Busy Time (Writes)

AnandTech Storage Bench 2011 Performance Over Time & TRIM
Comments Locked

86 Comments

View All Comments

  • SSDFDE - Wednesday, November 14, 2012 - link

    ... actually what happens if I set the IDE (sorry, its ATA actually) password in BIOS and then move the drive to another computer with no ATA HDD BIOS password set? Will it be readable there as the internal key in the drive of course still is the same?

    As ATA password is an option only, and setting the ATA password does not alter the internal SSD key, the actual encryption on the drive does not change at all no matter if a ATA password is set or not, right?

    BTW: Resetting / generating an new internal key seems to be done with "secure erase" on hardware-encrypted drives with internal encryption key... clearly then its only bitshit on the dive once the old key is lost. Is there an option to do that an the Samsung drive anyway?
  • JellyRoll - Saturday, November 24, 2012 - link

    Digital Signal Processing has nothing to do with the voltage states of the NAND. It is processing of the actual signal that comes from the NAND packages.
    DSP is used for multiple technologies, from audio to video to radar. These devices do not utilize nand, and DSP has zero interaction with the NAND itself, it merely reduces and corrects the amount of errors that come from the NAND.
    here is a primer on DSP: http://www.analog.com/en/content/beginners_guide_t...
    There needs to be more research before these incorrect explanations are posted.
    "Even though DSP doesn't make NAND immortal, it causes a lot less stress on the NAND, allowing it to last for more P/E cycles than what you would get without DSP."--This statement is entirely untrue, as DSP has no interaction with the NAND itself. It seems there is a bit of guesswork going on when writing this article.
    DSP simply corrects errors. With lower endurance NAND you experience more errors.
  • PanzerIV88 - Thursday, December 27, 2012 - link

    I just bought on Boxing Day that Samsung 840 250Gb for 150$ + Taxes. The sequential write speed is what scares the most but other than marketing bs it's actualy what's the less important. There's much more happening into the small files or reading speed which it shines in. I'll definitely replace my Vertex 4 128Gb which isn't as amazing as I thought it was, mostly since I learned that once it reaches 50% capacity, it turns into storage mode instead of performance and the write speed falls of 2 to 3x!!! I can confirm this with benchs I've done, it's really sad..

    Also thought of doing a Vertex 4 Raid 0 but other than bragging with bench numbers, seriously wtf does 600-800Mb/s is gonna do for a daily light load or gaming?! Totaly nothing more... so I'll save my money.
  • sriggins - Saturday, March 16, 2013 - link

    I have been using an 830 in my MacBook Pro since last October. I use FileVault 2 and do a ton of compiling on the drive. Performance has been steady. How does using OS X encryption affect the life of the drive? Is there any way to tell how many writes have been done so far?
  • brainfuck - Wednesday, July 3, 2013 - link

    Is there any way to find the Erase Block Size of Samsung 840 250GB?
    so that i can align my disk accordingly

    thanks
  • WildBillvms - Wednesday, May 21, 2014 - link

    Great Drive , but if you have memory problems click here ----> http://www.billatkinson.net/evo

Log in

Don't have an account? Sign up now