Dell U2713HM - Unbeatable performance out of the box
by Chris Heinonen on October 4, 2012 12:00 AM ESTDell U2713HM Design, OSD, and Specs
The U2713HM is an LED-backlit display that offers the sRGB colorspace and a resolution of 2560x1440. It uses an IPS panel that is 8-bit, but unlike the U2711 doesn’t support AFRC for simulated 10-bit color. Like all Dell monitors I have seen so far, it has a base that supports height, tilt, pivot, and swivel adjustments. Installation is a snap with Dell’s standard mounting system where you just slip the monitor onto the stand and it clicks into place. The front is nice and clean, lacking any stickers or text aside from the Dell logo, and all the OSD controls are handled by a set of unlabeled buttons on the right-hand side.

I have to complement Dell on the packaging for this monitor as well. Totally forgoing Styrofoam and only using a simple cardboard design, similar to recent Sony Blu-ray players, it both keeps the display safe and doesn’t fall apart, making it easy to reuse the packaging later. If you aren’t keeping the packaging, it also makes recycling the included materials much easier. I appreciate both the eco-friendliness and the ease of removing the monitor from the box. Dell thankfully puts a page detailing the monitor setup at the very top of the box, something other vendors would be wise to start doing.
Dell's U2713HM also offers 2x USB 3.0 ports on the side, and two more on panel with the video connections. The panel offers DisplayPort 1.2, VGA, DVI, and HDMI inputs, as well as a connection for Dell’s soundbar speaker. The PSU is integrated into the display so there is a standard 3-prong IEC socket rounding out the connections. Nothing on the U2713HM is flashy or groundbreaking; it's just very utilitarian. It’s not going to stand out in a way that makes you remember it at first glance, but after using so many other displays I also find there isn’t anything poorly designed that stands out either. Overall the design of the Dell U2713HM is clean and well done.
I have always given Dell high marks for their OSD and I will continue to do so here. With four buttons to control it, none of which are labeled, you would think it might be tricky but it is not. With clear on-screen labels and descriptions of the controls, as well as avoiding the common mistake of having keys labeled with arrows control menus that move the other direction, Dell does a good job here of making it easy to navigate and control. The menu options are clear, with your standard preset modes, brightness and contrast, input selection, and more display settings. One missing item is an option for an overdrive or gaming mode to improve pixel response, though in practice we haven't seen major improvements from such modes on other displays. Another missing feature is the ability to automatically select an input, which makes using it with multiple devices a little harder. The OSD remains essentially unchanged from previous Dell displays, but they have no reason to go back and reinvent it either.
Viewing angles are good for an IPS as we expect them to be. There is a light coating of anti-glare, but nothing that I find to be objectionable or that caused issues with the image for me. Unless you're trying to look at the U2713HM from a 170 degree angle or so, you shouldn't have any issues viewing it and seeing color or contrast shifts in normal use.
| Dell U2713HM | |
| Video Inputs | DisplayPort 1.2, DL-DVI, HDMI, Dsub |
| Panel Type | IPS |
| Pixel Pitch | 0.23mm |
| Colors | 16.7 Million |
| Brightness | 350 Nits |
| Contrast Ratio | 1000:1 |
| Response Time | 8ms GTG |
| Viewable Size | 27" |
| Resolution | 2560x1440 |
| Viewing Angle | 178/178 Horizontal/Vertical |
| Backlight | LED |
| Power Consumption (operation) | 42W Typical |
| Power Consumption (standby) | 0.5W |
| Screen Treatment | Light Anti-Glare coating |
| Height-Adjustable | Yes, 4.5" of range |
| Tilt | Yes |
| Pivot | Yes |
| Swivel | Yes |
| VESA Wall Mounting | Yes, 100mm |
| Dimensions w/ Base (WxHxD) | 25.17" x 7.89" x 16.70" |
| Weight | 12.44 lbs. without stand |
| Additional Features | USB 3.0 hub (4 port), Dell Soundbar Power Connector |
| Limited Warranty | 3 years |
| Accessories | DVI Cable, VGA Cable, USB Cable |
| Price | $799 |
The design and user interface of the Dell U2713HM seem to be up to the task, but how does it perform relative to other 27" models that have recently come through for testing?



96 Comments
View All Comments
iSayuSay - Thursday, October 04, 2012 - link
Thunderbolt!! It's 2012 and I'm done with Apple BS with their $1000 display solution? Why Dell did not going all out and kill Apple Thunderbolt Display? It has USB 3.0 and a few PC mainboards also popping out with TB port. So it's a good time to show Apple is not the only one! Replypeterfares - Thursday, October 04, 2012 - link
This has DisplayPort which is the video tech used in thunderbolt. USB 3.0 would be useless for this monitor other than being used for the USB hub (which it is) ReplyGothmoth - Thursday, October 04, 2012 - link
i looked at amazon here and the u2711 cost 20 euro LESS then the 2713HM.so what to buy if they both cost nearly the same? Reply
NeBlackCat - Thursday, October 04, 2012 - link
1) Whether the Displayport interface carries sound to the monitor, when connected to a Dell laptop. My U3011 doesnt (though HDMI does). Well known problem.
2) Do (or can) the USB ports remain powered/active when the panel is off? This has bugged me forever on other Dell monitors which don't allow this - makes them next to useless if you like to turn your monitor (but not laptop) off to save energy sometimes.
3) Long shot, but is CEC supported on DP/HDMI, or is there any other way to turn the monitor on/off, switch inputs, etc, automatically or remotely, and is there an auto-power off timer function? Some folks have their big monitors do double duty as HTPC screens, for which this is useful.
Note to Dell: since I imagine the answer to the above is 'no', please consider making it 'yes' on a future revision! :) Reply
cheinonen - Thursday, October 04, 2012 - link
1 - I didn't try the audio out, so I don't know, but I can try to check and see2 - I didn't turn the panel off, since the power draw in energy saving mode is less than a watt
3 - This I'm almost certain won't work. There isn't auto-detection for a signal on inputs coming from a PC, so I'm assuming there is no CEC support if it doesn't even have that signal detection. Reply
peterfares - Thursday, October 04, 2012 - link
My U3011 carries sound over DisplayPort. I've only tested it with an HP 2740p tablet though. I have never tried any Dell laptops. My old Studio XPS 1340 has DisplayPort but I gave that to my father and my newer Latitude XT3 only has a DisplayPort on the docking station which I do not own. Replylayte - Thursday, October 04, 2012 - link
I'd never buy a Dell display ever again. I bought a 3008wfp back in 2008 and it recently failed due to poor component choice by Dell in putting together the PSU (a particular diode fails http://www.badcaps.net/forum/showthread.php?t=1419... ). It seems to be a very common problem, with numerous people having the exact same symptoms.Dell basically told me to bin it and buy a new one as they don't offer a repair service.
Yea, thanks for that. Way to keep customers who buy your expensive high end stuff sweet. I'll take a punt on one of those Korean Ebay specials, at least you know they wont care. Reply
Gothmoth - Thursday, October 04, 2012 - link
yeah that´s bad.. i currentyl have 3 samsung 24 inch displays.during the three year warranty i send one of them in 3 times the other 2 times for repair.
defective powerboard each time. if they die again im out of luck.
that´s why i am frightened to buy expensive gear.
it will only last for the warranty period.... :( Reply
peterfares - Thursday, October 04, 2012 - link
Did you fix it according to the directions on that site? Seems like an easy fix, just need to change out one large through-hole component. Replylayte - Friday, October 05, 2012 - link
I have the parts arriving shortly. Looks like getting into it will be just as difficult as the soldering job. Reply