Biostar have always been on the radar for motherboard builders, occupying that niche of ‘bang-for-buck’ if your wallet is looking a little empty this month.  In the grand scheme of things they usually do okay, perhaps a little imperfect in the design or not exactly the premium BIOS and software package we have come to expect from top-tier motherboard manufacturers, but today we look at one of their Z77 range, the Biostar TZ77XE4.  Visually in orange, it provides something different, but is that true of the whole package?  Read on to find out more.

Biostar TZ77XE4 Overview

The Biostar TZ77XE4 forged an ambivalent relationship with me during testing.  The design is good, with a full set of video outputs, PCIe laid out appropriately, enhanced Realtek ALC898 audio to 110dB SNR, extra SATA ports, and in the box we should get a USB front panel if you are in the USA.  Gaming performance on a single NVIDIA card was similarly worthy of note. 

However, performance in other areas was not so great – for whatever reason CPU performance was stagnant compared to other Z77 motherboards, even in our benchmarks that were memory-independent.  The additional software needs to be updated; especially the driver and utility install CD that required manual install of each individual driver and utility. The lack of fan headers could also be cited as a concern.

There were memory issues - none of my testing kits wanted to work at XMP - the board is rated at "DDR3-2400+" and I have seen others running it at such, but my DDR3-2400 and DDR3-2133 kits did not want to play ball.  For all the testing on the Biostar board, I had to run at a lower memory strap (DDR3-2000 mostly) in order to remain stable.  Even a couple of the gaming setups did not work unless I resorted to default SPD.  A word from Biostar states that I received an early model before it was entirely finalized, so users should not experience these issues.  However, I did experience these issues, and it was odd that in some tests, the Biostar bottomed out (3DPM), but in others it ruled the roost (Metro2033 on a single GTX580).

At an MSRP of $170 (currently at Newegg for $150), there are currently a significant number of motherboards from the main manufacturers that cost less and have competitively better packages, such as the Gigabyte Z77X-UD3H, the ASUS P8Z77-M Pro, the ASRock Z77 Extreme4, and the ASRock Z77E-ITX.  That makes the TZ77XE4 a hard sell in all honesty – as a budget-perceived brand, Biostar has to bring something extra to the table.  In the past, this has always been the super-low price, but the TZ77XE4 does not qualify for that.

Visual Inspection

Biostar have characteristically been black and orange, and we see it here again on their top Z77 model, the TZ77XE4.  The power delivery is covered with large brightly colored heatsinks to remove heat, both connected via a heatpipe.  These heatsinks are set a little away from the Intel designated socket area, though the memory banks are right up against the socket boundary - with only two sticks of memory in the board there will be enough room for most of the beefiest air coolers.

In terms of fan headers, Biostar have unfortunately put much effort in here, with only three to play with - a 4-pin CPU fan header to the top right of the socket, and two 3-pin at the south end of the board.  Anyone requiring headers for more than three fans will have to resort to providing their own fan control.

Along the right hand side, apart from the 24-pin power connector, we have a series of eight SATA ports - two SATA 6 Gbps from the PCH, four SATA 3 Gbps also from the PCH, and another two SATA 6 Gbps from an ASMedia controller.  These are unfortunately not color coded, meaning users will have to double check every time that the SATA cable is going into the port as intended.  Below these we have a two-digit debug display for error reporting which also doubles up as a temperature sensor during normal OS operation.

The chipset heatsink sports the bright orange Biostar color, but is rather small which could lead to it being warm to the touch.  On the south side of the board, we are not exactly bursting with headers - aside from the fans, we have front panel headers, a pair of USB 2.0 headers, and power/reset/clear CMOS buttons.  These final three buttons are all similar and next to each other, so I can just see myself accidentally pressing the wrong one from time to time.  It is also important to note the location of a USB 3.0 header, just above the third full-length PCIe slot.  This is a rather awkward place, and cements its use primarily for rear facing adaptors (as long as there is nothing in the PCI slot beside it).

The PCIe layout is better than previous iterations, featuring an x16 (x8 in dual-GPU), x1, x8, PCI, PCI and Gen 2.0 x4.  This leaves a space between GPUs, and a spare x1, PCI and x4 when dual GPUs are being used.  Note we do not have a molex connector here, suggesting that Biostar are happy with the power delivery when the PCIe slots are in use.

Along the left hand side, you will see a Biostar branded metal shield.  Underneath this is a Realtek ALC898 chip, powering the audio.  Biostar claim that they have improved the shielding and the isolation for the audio.  This results in 110dB SNR; whereas we are normally quoted 108dB SNR or less for the Realtek codec (it states 110dB SNR in the Realtek Whitepaper under ideal conditions).  However, you may note that there are no digital audio outputs.

For back panel functionality, we have a PS2 keyboard port, two USB 2.0 ports (black), DisplayPort, HDMI, D-Sub, DVI-I, eSATA, two USB 3.0 (blue), gigabit Ethernet, two more USB 2.0 (black), and audio jacks.  I should stress that even though there is a DVI-I on the back panel, it does not accept analog signals by adaptor.

Board Features

Biostar TZ77XE4
Price Link
Size ATX
CPU Interface LGA-1155
Chipset Intel Z77
Memory Slots Four DDR3 DIMM slots supporting up to 32 GB
Up to Dual Channel, 1066-2600 MHz
Video Outputs DisplayPort, HDMI, DVI-D, D-Sub
Onboard LAN Realtek 8111E
Onboard Audio Realtek ALC898
Expansion Slots 2 x PCIe x16 Gen3 (x16, x8/8)
1 x PCIe x16 Gen2 (x4)
1 x PCIe x1 Gen2
2 x PCI
Onboard SATA/RAID 2 x SATA 6 Gbps (PCH), Support for RAID 0, 1, 5, 10
4 x SATA 3 Gbps (PCH), Support for RAID 0, 1, 5, 10
2 x SATA 6 Gbps (ASMedia Controller)
1 x eSATA 3 Gbps
USB 4 USB 3.0 ports (2 back panel, 2 from headers)
8 USB 2.0 ports (4 back panel, 4 from headers)
Onboard 4 x SATA 6 Gbps
4 x SATA 3 Gbps
1 x USB 3.0 Header
2 x USB 2.0 Header
3 x Fan Headers
1 x CIR Header
1 x SPDIF Output Header
1 x Front Panel Audio Header
Power Connectors 1 x 24-pin ATX connector
1 x 8-pin 12V connector
Fan Headers 1 x CPU Fan Header (4-pin)
2 x SYS Fan Header (3-pin)
IO Panel 1 x PS/2 Keyboard Port
1 x eSATA
2 x USB 3.0
4 x USB 2.0
1 x DisplayPort
1 x HDMI
1 x DVI-D
1 x D-Sub
1 x Gigabit Ethernet
Audio Jacks
Warranty Period 3 years from date of sale
Product Page Link

Aside from the extra SATA controller, PCI slots, Power/Reset buttons and the use of all four display outputs, there's nothing much 'extra' that Biostar have put on the board which isn't already in the default chipset.  This could perhaps be their downfall when it comes to conclusions after testing.

Biostar TZ77XE4 BIOS
POST A COMMENT

27 Comments

View All Comments

  • pandemonium - Monday, July 23, 2012 - link

    http://forums.anandtech.com/showthread.php?t=22297...

    If there wasn't anyone in the world that needed a PCI expansion slot, I highly doubt all the major manufacturers would continue to have them available on most of the boards produced today...
    Reply
  • Grok42 - Wednesday, July 25, 2012 - link

    Good link. So looks like sound card, video capture and network in order of most to least common. I would love it if Anandtech would perform a double blind listening test of discrete cards Vs. on board ones. Video capture cards are certainly a good use but aren't most HD quality ones PCI-E? Using either type of slot for network is odd outside of a very niche application.

    All that said, I think I would prefer to have at least one PCI-E 1x slot just in case something broke on the board so I could fix it with a cheap 1x NIC or sound card. I still can't think of *any* reason for two old PCI slots this board has.
    Reply
  • Darth_Bob - Tuesday, July 24, 2012 - link

    I may be the only Biostar fan here lol. Ive used them for my last 2 builds. Used to have a 775 with Q9550 - nice OC for about 2.5 years, never a hiccup, still have it. Currently have an i5 3770 on this same board. Never had bad luck, do just fine with overclocking. I've had much worse luck with other brands.
    It's nice to see them grace the good pages of Anandtech.
    Reply
  • ggathagan - Tuesday, July 24, 2012 - link

    Ian, I like generally your writing, but for the love of all that is good and grammatical, can you PLEASE spend more time on wrapping up loose ends?
    You have a habit of missing important parts of sentences.
    Words like "not" and "can", while very short, have a lot of impact on your articles.

    Under the "Visual Inspection" section:

    "In terms of fan headers, Biostar have unfortunately put much effort in here, with only three to play with - a 4-pin CPU fan header to the top right of the socket, and two 3-pin at the south end of the board."

    I'm thinking you meant something along the lines of ...Biostar have unfortunately not put much effort in here...

    Last page:

    "Motherboards can relatively straightforward and a joy to work with..."

    How about: Motherboards can be relatively straightforward and a joy to work with...

    Bios page:
    "This so far has worked in all testing, albeit even with a hint of instability."

    I can't tell if you mean there is a hint of instability or there is not.

    This so far has worked in all testing, albeit with a hint of instability.

    or

    This so far has worked in all testing, without even a hint of instability.

    I make these comments as constructive criticism.
    Sweating the details is what separates good from mediocre writing.
    Reply
  • IanCutress - Monday, July 30, 2012 - link

    Please note that these articles to go through two pairs of eyes several times before posting. Writing 12k+ words a week isn't easy, especially if you consider 'variances of understanding'. As a Brit, I constantly have to ensure I do not use contractions, and that all my company names are singular, otherwise I get slammed in the comments for not being in an American style. If you see anything worthy of note that needs changing and wish me to change it, please email at ian [at] anandtech [dot] com.

    Ian
    Reply
  • TuFur - Tuesday, July 24, 2012 - link

    I don't know what is up with Biostar. I just returned a TA970XE motherboard because of instability. It started by recognizing my Phenom II 965 as a tri-core processor. Then it would only run two sticks of memory in the auxiliary memory sockets. My diamond 650 TV tuner wouldn't work with my amd 6850 video card. The clincher after a week with this board was it not recognizing my SSD boot drive consistently. And there is no bios update since 2/22/12 when the board was released. I traded it for an Asus M5A88-v-evo and haven't looked back. The new board installed without any problems and is fully functional with my SSD drive, TV tuner and 6850 card. I also saved $20 on an open box. Reply
  • jonjonjonj - Thursday, October 25, 2012 - link

    i would never click a 'Install Everything' button to install garbage on a mb dvd. im going to go download each individual driver and make sure its the lastest one. so i know im only installing the ones i actually need. i like knowing exactly whats being install but thats just me. im anal about that stuff. Reply

Log in

Don't have an account? Sign up now