Power Consumption

The Neutron GTX consumes a fair bit of power when idle, which is disappointing. At 1.16W doing nothing, the Neutron GTX can have a tangible impact on battery life. Load power consumption is much more competitive. It's not what I would consider low, but it's not unreasonably high either.

The ONFi based Neutron is noticeably more power hungry under load unfortunately. In both of our write tests the regular Neutron gets very close to 5W of power draw. If you're going to use one of these drives in a notebook, make it the Neutron GTX.

Drive Power Consumption - Idle

Drive Power Consumption - Sequential Write

Drive Power Consumption - Random Write

Performance Over Time & TRIM Final Words
POST A COMMENT

36 Comments

View All Comments

  • PommieB - Monday, August 20, 2012 - link

    The Vertex 4 uses the 9145 controller, which as enterprise origins and was used by OCZ in there latest PCIe ssd drives, OCZ was obviously impressed with the controller to use it as there re-branded Everest controllers in the Vertex 4 and other ssd drives, so yes the Plextor M5 Pro is first ssd drive to have the 9187 Marvell controller. Reply
  • maximumGPU - Tuesday, August 21, 2012 - link

    thanks :) Reply
  • DukeN - Monday, August 20, 2012 - link

    For those of us hoping to put 3 or 4 of these in our systems..

    Please and thanks.
    Reply
  • Zap - Monday, August 20, 2012 - link

    Why does Corsair (and also Newegg) call it SATA 3?

    http://www.sata-io.org/developers/naming_guideline...

    Proper terminology is to call it "SATA Revision 3.0" or "SATA 6Gb/s" and to NOT use "SATA III" or "SATA 3.0." This is because SATA II was often marketed as SATA 3Gb/s or SATA 300, so "3" is associated with the slower speed.
    Reply
  • Beenthere - Monday, August 20, 2012 - link

    Most consumers are interested in reliable, compatible, hassle-free PC hardware not the half-baked trick-of-the-week rushed out the door for huge profits. PC hardware review sites lose credibility when they hype half-baked products and gloss over obvious defects or down-play their significance.

    Many companies are quite successful selling quality, reliable products and providing excellent customer service - all at affordable prices. In fact that use to be the norm in the U.S. until some unscrupulous CEOs decided that they could reap more money in annual bonuses by shipping crap products and pretending there were no issues or defects.

    Unfortunately for Corsair in recent years they have jumped on the growth-at-all-cost bandwagon by using contract suppliers. Corsair's numerous product lines are filled with documented defects be it SSDs, PSUs, H2O CPU coolers, etc. At one time I recommended Corsair RAM but even that seems to have dropped in reliability and compatibility recently so I no longer recommend any of their current products.
    Reply
  • Shadowmaster625 - Monday, August 20, 2012 - link

    Idle power consumption is stupidly bad. Samsung SSD830 is the reigning champion by far. It may not be the fastest, but it is competitive speed wise, and its low idle power just continues to own the competition. I wouldnt even consider any other drive for a notebook. Reply
  • Paapaa125 - Monday, August 20, 2012 - link

    I have no clue why you keep on presenting the same data in two different charts: average data rate and disk busy time. Only one is enough. Showing the other serves no purpose at all so please pick one of them and start using it. Thanks! Reply
  • Mastadon - Monday, August 20, 2012 - link

    What kind of TRIM does the Corsair controller use? Is it garbage collection after the fact, or on-the-fly? Reply
  • Mr Perfect - Wednesday, August 22, 2012 - link

    I've always been under the impression that Garbage Collection, as defined by the drive makers, is not TRIM. Garbage Collection is done solely inside the drive by the controller with no regard for what the data in the flash is or what the OS is doing. TRIM is done through commands sent from the OS to the drive to tell it what flash is holding valid data, and what flash is no longer needed and can be erased. I think some drives even do both GC and TRIM. If he's saying TRIM, I'd take it to be the later case. Reply
  • phimac10 - Tuesday, August 21, 2012 - link

    Thanks for a good insight in the SSD world. Reply

Log in

Don't have an account? Sign up now