FSP OEM 400W APN and GHN -1

FSP doesn't sell these OEM versions directly in the market. Instead, they find their way through various distributors and e-tailers to end-users. They come without any packaging because the companies want to keep this extra strictly to their retail version of the product. Therefore customers get a 2-year warranty. With 120W the 3.3V and 5V rails are rated somewhat lower than we're used to, but there's nothing to worry about since modern systems don't place a huge load on these rails anymore. The GHN model has no rating on 12V, the other one delivers 336W. FSP provides a low number of connectors for both products, but they are always able to customize the configuration e.g. by adding a 4+4-pin CPU connector for an OEM/ODM customer.

This Yate-Loon fan with the model number D12SH-12 and 120mm diameter uses sleeve bearings and seven fan blades. The maximum speed is 2200rpm at +12V. The subjective loudness of the fan (and the electronics of course) will be investigated on the following page.

Cables and Connectors APN

Connector type (length)

Main 1x 24-pin (50cm) fixed
ATX12V/EPS12V 1x 4-pin (50cm) fixed
PCIe 1x 6-pin (40cm) fixed
Peripheral 3x SATA (ca. 40, 60, 80cm) fixed
2x HDD, 1x FDD (ca. 40, 60, 80cm) fixed

 

Cables and Connectors GHN

Connector type (length)

Main 1x 24-pin (45cm) fixed
ATX12V/EPS12V 1x 4-pin (50cm) fixed
PCIe 1x 6-pin (50cm) fixed
Peripheral 2x SATA, HDD (ca. 30, 45, 60cm) fixed
1x SATA, HDD, FDD (ca. 50, 65, 80cm) fixed
2x HDD, 1x FDD (ca. 50, 65, 80, 95cm) fixed

FSP400-60GHN(85)

FSP400-60APN (230V version)

The internal layout consists of three large heatsinks. Both main caps are made by CapXon and rated at 420V.  It's also easy to spot the secondary capacitors and their respective manufacturers. FSP uses different suppliers for these PSUs, a few from Teapo and some from CapXon, both of which we have seen many times lately. Since the basic designs are several years old now, we didn't expect to find anything extraordinary within the design. However, both PSUs are still sold today and you can expect good quality from PSUs that use it.

Corsair CX430 V2 430W -2 FSP OEM 400W APN (230V version) and GHN -2
Comments Locked

67 Comments

View All Comments

  • Freddo - Tuesday, July 3, 2012 - link

    I bought a FSP Aurum 400W 80 Plus Gold about a year ago, and I'm EXTREMELY pleased with it. It's very cool and energy efficient

    I have my computer on pretty much 24/7, but last week I turned it off for pretty much the first time since I got the PSU to install more RAM, and the PSU was still very cool, didn't feel like it was on at all.

    http://www.fspgroupusa.com/aurum-gold-400-au400/p/...
  • jasonnovak - Tuesday, July 3, 2012 - link

    This power supply has been on sale for under $20 after rebates a few times over the last months - it's on sale right now for another day, at newegg 15% off code and rebate.

    It's a re-badged Seasonic S12II - high quality unit. I got a few as spares, use a HCG-620 myself.
  • Guspaz - Tuesday, July 3, 2012 - link

    I've got a Shuttle SZ77R5 with a 500W PSU, running an i7-3770k and a GeForce GTX 670... It doesn't get all that much faster than this without your cost/performance ratio going to crap, and the 500W PSU is way more than enough.

    Why this is the case should be obvious: the processor has a 77W TDP, the graphics chip has a tdp of 170W, which is 247W at full load, and those are the two biggest power draws in the case. Yes, the other parts use power, like the hard disks (I've got SSDs), fans, memory, chipset, etc. but not enough to max out even a 500W PSU.
  • QChronoD - Tuesday, July 3, 2012 - link

    For your system a 500W supply sounds great, but for other people they might have more stuff in their box that needs more power. For example, my main system has an i7-920, GTX 560, and 14hdds. It was giving me random fits occasionally when rebooting on my old 650W supply (can't remember the name but I believe it was one of the recommended ones either on here or tom's or someplace) I ended up replacing it with an 850W and now I don't get restart cycles anymore. Theoretically, the 650W supply had enough power to run everything (and still 100+W of spare capacity), but something wasn't happy and a large supply seems to have fixed everything.
  • Finally - Tuesday, July 3, 2012 - link

    Bullshit.
    What you are describing is the American mentality towards the environment, not much else.
  • JarredWalton - Tuesday, July 3, 2012 - link

    I think he's almost certainly correct in that the PSU was a problem -- HDDs tend to draw power differently than GPUs and CPUs (same voltage, different rails). The real question is what he's doing with 14 HDDs in a single system. Sounds more like something for a file server, and if you're running a file server you should probably also have a higher quality PSU to begin with.

    As for your contention that he has an "American mentality towards the environment", kindly take your stereotyping elsewhere. Very likely this has nothing at all to do with his nationality and is simply a reflection of his enthusiasm for computers and technology.
  • KAlmquist - Tuesday, July 3, 2012 - link

    Hard drives are commonly designed to draw up to 2 amps on the 12 volt line when spinning up, so if you spin up 14 hard drives at ones the power draw could be 2A * 12V * 14 = 672 watts. Normally, systems with large numbers of hard drives are configured to spin up a few drives at a time to avoid overloading the power supply. The alternative is to do what you did: buy a very large power supply.
  • JimmiG - Tuesday, July 3, 2012 - link

    Still running a Corsair 450W VX PSU since 2007 here. Currently with an overclocked Phenom II X4 system and GTX460. Rock solid. I always laugh when people ask whether their new 750W PSU's will be enough for a Sandy Bridge and Radeon 6850 plus one SSD...
  • bwave - Tuesday, July 3, 2012 - link

    Why would you consider any of these when you can get a Cooler Master Elite 460W for $29.99 or a Cooler Master 500w for $37.99 ?

    I've used hundreds of the Cooler Masters with zero failures, very high quality and it's a name brand!
  • 'nar - Wednesday, July 4, 2012 - link

    That's what I want to know. I use the same two all the time, but I am almost scared to find out how they actually test.

    Most users do not notice, and do not care. They only want the cheapest PSU. I may get them to allow me to installed a better one, but only so far. Most of the PSU's reviewed here are marginal in that regard.

    We're talking about systems with a core i3 and integrated graphics, and a single hard drive. Maybe it can push 100-120 watts, when the grand kids try to play WOW on their grandparents' computer. Sometimes they want the $25 model even.

    Shoot, for office workstations I use these Cooler Masters even. I haven't had a problem yet. Nowadays that means Core-i5, 8GB DDR3, and 60GB SSD. I built a server recently that only used 18watts at idle! It is just hard to find good PSU's at less then 400 watts.

Log in

Don't have an account? Sign up now