MSI Z77A-GD65 - Overview

Whenever it comes to a motherboard comparison involving ASUS, Gigabyte or ASRock against an MSI board, the MSI board always tends to show a strong result - either in terms of price, performance or features.  Therefore, when it comes to the new batch of motherboards for Ivy Bridge, it is fair to say that I expect a strong showing from MSI.  Today, we have their Z77A-GD65, which will be one behind their future released GD80 that got attention back at CES for being Thunderbolt equipped.

The Z77A-GD65 currently retails at $190, a good amount above the Gigabyte board.  With the MSI, we have an Intel NIC, a full set of audio outputs, but no PCI or mSATA.  The Z77A-GD65 is in general a good board to play with.  It would underpin any Z77 build with ease.  The design is beneficial to multi-GPU setups, offers voltage read points of overclockers, and gives a front facing USB 3.0 port for front panel USB 3.0 cases.  The auto-overclocking OC Genie is relatively simple, but using the BIOS is straightforward (either at boot time or in the OS with Click BIOS software) to get something more befitting an Ivy Bridge processor.

Due to some of the other boards providing an overclock out-of-the-box, performance on the MSI may seem to be a little down on the other boards, but by enabling OC Genie on board, which every processor should be able to do, performance numbers would be comparable to the competition.

Visual Inspection

The Z77A-GD65 is another motherboard in this roundup that comes in a black and blue livery.  This time MSI have more of an excuse than others do as they have been using it for a fair while now.  Using what is essentially a 10 + 2 phase power delivery, MSI are using somewhat beefier heatsinks than their rivals, connecting both via a heatpipe.  The socket area is right up against Intel's minimum requirements from left to right, but there is some room to maneuver big air coolers from top to bottom.  Around the socket there are at least four fan headers to use: one 4-pin CPU header between the top VRM and the memory slots, a 4-pin system fan header just the other side of the memory slots, a 4-pin to the bottom left of the socket area, and another 4-pin beside the 24-pin ATX power connector.   A fifth fan header can be found at the bottom of the board.

Along the right hand side, we have the standard MSI trio of power/reset/OC Genie buttons, followed by a series of voltage checkpoints for overclockers.  Aside from the 24-pin power connector and the system fan header, there is also a USB 3.0 header at right angles to the board, indicating its primary use is to the front of the case.  Underneath this are the eight SATA ports - two SATA 6 Gbps from the PCH, four SATA 6 Gbps also from the PCH, and another two SATA 6 Gbps from an ASMedia controller.

As the power/reset/OC Genie buttons are at the top right, the bottom of the board has more room to fit in all the headers as needed - front panel audio, TPM, front panel headers and USB 2.0 headers.  In terms of PCIe, MSI have done away with the PCIe to PCI bridge and focused purely on PCIe.  We have an x1, x16 (x8 with dual GPU), x1, x1, x8, x1, and a PCIe 2.0 x4.  In this instance, there is plenty of room for a dual GPU setup with PCIe slots to spare for any extras.

Also of note is the chipset cooler, which is very flat and large with minimal fins, perhaps suggesting that MSI is confident about their heatsink design.  Underneath this is a two digit debug display, and a BIOS switch for changing between two BIOSes.

On the rear IO panel, I think MSI have been reasonable with what they have left in and what they have left out.  From left to right, we have a combination PS/2 port, two USB 2.0 ports (black), a clear CMOS button, digital and coaxial SPDIF outputs, two more USB 2.0 ports (black), a HDMI port, gigabit Ethernet, two USB 3.0 ports (blue), D-Sub, DVI-D, and audio jacks.

Board Features

MSI Z77A-GD65
Price Link
Size ATX
CPU Interface LGA-1155
Chipset Intel Z77
Power Delivery (CPU/iGPU) 8 + 1 + 2 + 1 (VRM/VTT/GPU/SA)
Memory Slots Four DDR3 DIMM slots supporting up to 32 GB
Up to Dual Channel, 1066-2667 MHz
Video Outputs HDMI, DVI-D, D-Sub
Onboard LAN Intel 82579V
Onboard Audio Realtek ALC898
Expansion Slots 2 x PCIe x16 Gen3 (x16, x8/8)
1 x PCIe x16 Gen2 (x4)
4 x PCIe x1 Gen2
Onboard SATA/RAID 2 x SATA 6 Gbps (PCH), Support for RAID 0, 1, 5, 10
4 x SATA 3 Gbps (PCH), Support for RAID 0, 1, 5, 10
2 x SATA 6 Gbps (ASMedia ASM1061)
USB 4 USB 3.0 ports (2 back panel, 2 from headers)
10 USB 2.0 ports (4 back panel, 6 from headers)
Onboard 4 x SATA 6Gbps
4 x SATA 3 Gbps
1 x USB 3.0 Header
3 x USB 2.0 Headers
1 x IEEE1394 Header
1 x TPM Header
1 x Front Panel Audio Header
Power/Reset Buttons
OC Genie
5 x Fan Headers
Power Connectors 1 x 24-pin ATX connector
1 x 8-pin 12V connector
Fan Headers 1 x CPU Fan Header (4-pin)
4 x SYS Fan Headers (two 4-pin, two 3-pin)
IO Panel 1 x Combo PS/2 Port
1 x Clear CMOS Button
1 x Coaxial S/PDIF Port
1 x Optical S/PDIF Port
4 x USB 2.0
2 x USB 3.0
1 x Gigabit Ethernet
Audio Jacks
1 x HDMI
1 x DVI-D
1 x D-Sub
Warranty Period 3 Years
Product Page Link

It is good to see an Intel NIC on this motherboard and plenty of headers to go around.  The only things missing where other motherboards may have better all-round functionality are a PCI slot, mSATA or on-board WiFi.

 

Gigabyte GA-Z77X-UD3H - In The Box, Overclocking MSI Z77A-GD65 - BIOS and Software
Comments Locked

117 Comments

View All Comments

  • ggathagan - Thursday, May 10, 2012 - link

    Yeah, we got your rant the 1st time around and didn't care about it then, either.
  • JSt0rm01 - Thursday, May 10, 2012 - link

    If you don't have anything to add to the conversation then maybe you should stfu. Its a perfectly fine place to discuss the slowing release schedules of desktop hardware and I don't think you, as a random internet name, are in any position to say what others care or don't care about. You aren't special.

    -------------
    Also, after being a member of the anandtech forums for 10 years I was permanently banned by the moderators there because they wanted to censor a website (ffdt.info) that had conversation that was critical of their moderation. I find that the free flow of all information on the internet is critical. For a tech website such as this to limit the flow of information is offensive the core of these beliefs and its all because certain people in positions of illusory power deem that information detrimental to their positions.
  • bji - Thursday, May 10, 2012 - link

    I think he was referring to the 'signature' that you are putting after every post. You know, the stuff after the dashes. With all respect, if you are going to put that in every post you're going to have to expect some flak from people who don't like when others try to make a statement. Not saying that I have a problem with it, but there are people who get pissed off about every little thing ...
  • JSt0rm01 - Thursday, May 10, 2012 - link

    well then let him be pissed. Thats my sig and if he wants to see it less then he shouldnt be responding to me.

    -------------
    Also, after being a member of the anandtech forums for 10 years I was permanently banned by the moderators there because they wanted to censor a website (ffdt.info) that had conversation that was critical of their moderation. I find that the free flow of all information on the internet is critical. For a tech website such as this to limit the flow of information is offensive the core of these beliefs and its all because certain people in positions of illusory power deem that information detrimental to their positions.
  • Paapaa125 - Friday, May 11, 2012 - link

    I don't understand why this site even accepts such a long sig. Stupid.
  • smalM - Tuesday, May 8, 2012 - link

    Black connectors on black boards - I really hate it.
    Where are the boards for grown-ups?
  • TGressus - Tuesday, May 8, 2012 - link

    Not black enough if you ask me. Caps could be all Hi-c, silk screening ever single component should just stop, the branding could be black and UV reactive.

    Worst is all that silver metal that connects the chips/sockets. Black that!
  • embeddedbill - Tuesday, May 8, 2012 - link

    Thunderbolt is curiously missing, more than a year after the apple intro. Some compelling features if price and vendor support don't drive you mad. Time can solve both those problems, I'm just not sure how flexible the implementation will be in a Windows environment, i.e. hot plug of performance hardware, and discrete video card integration of its display port out with the TB pcie lanes.

    Scarce details exist which makes me wonder if this tech will eventually wind up as overpriced fringe apple only, read FireWire!
  • kenyee - Tuesday, May 8, 2012 - link

    Probably something a bit too bleeding edge for you guys, but Gigabyte has apparently figured out how to make it painless for setting up a Hackintosh w/ their UEFI BIOS:
    http://teksyndicate.com/news/2012/04/24/best-mothe...
  • Zoomer - Tuesday, May 15, 2012 - link

    Hmm, that might be the reason for their weird phy choices.

Log in

Don't have an account? Sign up now