Gigabyte GA-Z77X-UD3H - BIOS

Gigabyte BIOSes have been a little up and down of late.  When every other manufacturer was displaying their graphical BIOS systems with P67 and Z68, Gigabyte still had a basic system reminiscent of the previous 10 years of BIOSes.  With X79 they introduced a graphical BIOS, termed '3D BIOS'.  This was essentially a perspective image coupled with a range of BIOS options.

Since then, we have the next iteration of this '3D BIOS Technology'.  From the outset, it looks shaper, sleeker and a refined version of the initial X79 launch.  Gigabyte says that their BIOS system is completely bespoke, written from the ground up rather than an interface on a licensed system like other competitors.  While this introduces a level of infancy to the system compared to others that have been using licensed back ends for a while, it should offer Gigabyte a wider range of maneuverability in terms of what fancy features they can offer.

In terms of design choices, Gigabyte have decided to use a generic outlay of most of the Z77 range with this screenshot - you will notice the PCIe layout is not the same.  However, this does not matter much - by moving the mouse over any of the components in the image (CPU, Power Delivery, and IO) will bring up an explanation of the part, and clicking will give a variety of options.  As a front screen, it would help if it stated the model of the motherboard being probed, the CPU, and the amount of memory.  Other vendors have voltages and fan speeds as well - by going through this sort of layout, Gigabyte have essentially boxed themselves out of providing this information without some serious design changes to be made.

The buttons at the bottom of this 3D BIOS screen offer some other choices - boot sequence, languages, fan controls, and a quick save and exit.  However, the 'Advanced' mode brings up the set of BIOS controls that allow for a greater choice and flexibility:

As a bonus compared to X79, this BIOS interface is a lot quicker.  Previously, in order to use the number pad to insert values, the user would have to press Num Lock, wait five seconds for it to initialize, and then values could be entered.  This time it works straight from the off.  Most options will allow users to click and select values as well.

For overclocking, our options are split over many menus (which could be seen as a little annoying).  For CPU and memory frequency settings, the 'Advanced Frequency Settings' option comes into play, which also allows modification of Turbo modes and power limits.  The more advanced memory settings, such as subtimings, can be modified in the Memory menu.  The 'fun' comes from the voltage settings screen, which has a different screen for CPU and Memory voltages, and then a third screen for customizing the digital power delivery options.  99.99% of users will never need the digital power delivery options though.

Fan controls come under the PC Health menu as per usual, and Gigabyte are still deciding to stick with an almost incomprehensible method of allowing users to customize their fan settings.  By offering options in 'PWM Value / ºC', the only thing the user will understand is 'more means more power'.  I would rather this actually had temperatures related to it, or some sort of in-BIOS graphing system to show what is actually happening.

In other Gigabyte BIOS related news, I had distinct trouble trying to get any G.Skill memory to boot on the shipping (F2) BIOS.  It would simply keep resetting the board.  In the end, I had to use some older Patriot memory to install a newer BIOS (F7) and then tried with the G.Skill again, with success.

Software

Gigabyte software takes a pinch of the old and a pinch of the new(ish).  As the backbone, we still have EasyTune6, the all-in-one overclocking and monitoring tool.  Although it looks weathered with age, with a decent upgrade (ET7?) it could be back on its feet.  It certainly needed it with the version that came on the disk with the motherboard:

The version as shipped could not read the CPU properly, or suggest overclocks for it.  I attempted to download the latest version from Gigabyte, only for it to be corrupt no matter where I downloaded it.  However, I would expect it to be fixed as soon as possible - I have seen screenshots from overclockers using versions that work, so no doubt that will filter down to the public through the download website.

EasyTune6 has its usual gamut of basic and advanced overclocking options, as well as a hardware monitor and a very basic fan control front end.  What is relatively new about ET6 is its auto-tuning feature.  The red button on the screen above releases Gigabyte's new tuning feature for Ivy Bridge systems:

After confirming you wish to proceed, it does a series of stability tests with CPU ratios and BCLKs.  It overall worked like a charm - I cannot fault it.  With my processor, it kept all the turbo modes, but gave the processor a 4.81 GHz overclock under single threaded performance, reducing to 4.59 GHz for multithreaded loads, all at 1.236 volts at load.  More about this in the overclocking section on the next page!

Gigabyte also bundle @BIOS with their motherboards, which allows the user to download and update the latest BIOS (or update from a file) from the operating system. 

Gigabyte GA-Z77X-UD3H - Overview, Visual Inspection and Board Features Gigabyte GA-Z77X-UD3H - In The Box, Overclocking
POST A COMMENT

117 Comments

View All Comments

  • SnowKing - Tuesday, May 08, 2012 - link

    I think you are confusing bits per second vs. bytes per second. Do not be alarmed, that is the gimmick of Ethernet.

    10 mbps (megabits per second) = 1.25 MBps (megabytes per second)
    100 mbps (megabits per second) = 12.5 MBps (megabytes per second)
    1 gbps (gigabits per second) = 125 MBps (megabytes per second)

    If you want 1 GBps, you will need an 8 gbps connector i.e. (10gbps nic)...and good luck with that.

    Unit Converter
    http://www.numion.com/calculators/units.html
    Reply
  • repoman27 - Tuesday, May 08, 2012 - link

    theSeb's (and originally adrien's) point here is that the chart for LAN speeds erroneously list MBps instead of Mbps. Reply
  • HollyDOL - Wednesday, May 09, 2012 - link

    Transfer speed is always measured in bps (bits per second).
    Latin prefixes for kilo-Mega-Giga etc. signify 10^3,10^6 etc. bits

    Capacity volume is always measured in B (bytes).
    Latin prefixes for kilo-Mega-Giga etc. signify 2^10, 2^20 etc. Bytes (ie. 1kB = 1024 Bytes) according to old school rules.
    According to new customs kilo-Mega-Giga signify 10^3,10^6 etc. Bytes, prefixes kB, MB, GB, while alternate prefixes kiB,MiB,GiB signify 2^10,2^20... Bytes. Data storage capacity uses new style kB,MB,GB,TB for long years since it makes their drives look bigger, while on hardware and OS level you are much more likely to see units based on power of two since it is much more natural for binary computer.

    Basically 10Mbps = 1.25MB/s is completely wrong... 10Mbps = 10,000,000bps = 1,250,000 B/s = 1.192 MB/s

    1TB (new style or storage device manufacturers) = 931,32GiB
    Reply
  • Schafdog - Tuesday, May 08, 2012 - link

    What is draw of power from GPUs? Reply
  • IanCutress - Tuesday, May 08, 2012 - link

    The 7970s should Idle at approx 3W or less each. Reply
  • gorg_graggel - Tuesday, May 08, 2012 - link

    the current asus lineup seems to have problems with memory configs that consist of 8GB dimms...
    their list of supported memory modules seems to be made for multiple boards...it contains configurations for e.g. 6x4gb for boards that have only 4 slots...so i guess it`s not only a problem with my board...

    i got myself a sabertooth z77 and a pair of corsair 1600mhz 8gb dimms. no matter how conservative i set the timings the board won`t boot at 1600mhz and freeze after some time at 1333mhz (spd or xmp don`t work either). i can only get them stable at 1066mhz. a single dimm runs fine at the specified clocks and timings.

    could you spare some time and test the boards with a 1600mhz config with 2 8gb dimms? or even with 4 of those? no underclocking of higher specced dimms, as there is a 2x8gb@1866mhz config in the list...
    would be interesting to know if all those boards had problems with ivy brigde`s max specified dram clocks...

    i guess it will be fixed in a future bios update, but maybe beeing pointed out by a respected site, they are gonna hurry it up a bit...i mean c`mon 1600mhz rams at 1066mhz? seriously...
    Reply
  • gorg_graggel - Monday, May 14, 2012 - link

    so, i got myself another pair of 8gb dimms...
    g.skill ripjaws 1600mhz, cl10...

    those worked from the get go...also not on ovl list...

    the latest bios (1015) made the corsair dimms work better @1333mhz (no more freezing), but still no 1600 (for which they are specified)...

    so if you plan to get 8gb 1600mhz dimms for your asus board, steer clear from corsair vengeance low profile dimms...at least until the bios has matured some more...
    Reply
  • Luay - Tuesday, May 08, 2012 - link

    The $225 Asus V Pro has the Realtek ALC892 audio chipset while the $148 Asrock Extreme4 has the 898! Not everyone wants or can install a sound card so what are they thinking?

    GIGABYTE GA-Z77X-UD5H-WB Has wireless, 898 audio chip and a third PCI-E 3.0 slot for $219. That's a good reason to pay an extra $70 over the Asrock Extreme4 as I don't really care about auto-over-clocking.

    Only Asrock at budget and Gigabyte at mid-end are in it to win it. Not enough high-end boards to tell who won there.

    I am shocked by what Asus put on the table but I might be missing something here.
    Reply
  • blacksun1234 - Tuesday, May 08, 2012 - link

    Gigabyte's third PCI-E 3.0 slot cannot work if CPU BCLK OC only 1MHz to 101MHz. It is buggy M/B. Don't buy it. Reply
  • blacksun1234 - Tuesday, May 08, 2012 - link

    I mean GIGABYTE GA-Z77X-UD5H-WB . GA-Z77X-UD3H is Ok for 3rd PCI-E 2.0. Reply

Log in

Don't have an account? Sign up now