For just over a week, I’ve been using two phones interchangeably. The first is the Lava Xolo X900 with Medfield inside, the second is the flagship of HTC’s new One series, the HTC One X on AT&T. It’s a device with lofty goals, as it’s the flagship of HTC’s new branding and strategic positioning behind a single line of devices, industrial design, and focus. The strategy mirrors that of Samsung’s with their Galaxy series, and if successful will rekindle the excitement behind HTC’s brand.

The One X on AT&T is really a One XL (L for LTE), however in the USA the device carries full One X branding. We’ve got the International One X and One S variants which will be reviewed in short order, but for today we’re talking specifically about the One X on AT&T.

The One X is without doubt unlike any other HTC smartphone I’ve held to date. In fact, it’s a testament to how revised HTC’s industrial design is that I can even write that sentence. The phone is machined, not injection molded, from a single machined piece of polycarbonate plastic, and feels anything but cheap in the palm. If Nokia was really the first to demonstrate that you can have a polymer (read: plastic) device without making it feel second rate, HTC is the second OEM to do it properly. Probably the biggest part of that effort is giving the surface a proper texture. In this case the HTC One X backside is given a sand blasting for texture, while the sides remain slick with a piano finish gloss. It’s a great juxtaposition of textures that makes it easy to identify proper grip, and likewise break any homogenaity.

The buttons blend into the glossy sides of the One X, getting pretty close to the optimal combination of protrusion and clickiness. The power/standby button at top is no exception. Speaking of the top, there’s a secondary microphone for noise cancelation, headset jack, and finally the microSIM tray, which requires an ejector tool (provided in the box) like many other newer designs.

The case is again a single piece unibody construction. With exception of the microSIM tray, there are virtually no doors or covers, and the consequence is no flex, creaking, or chattering seams when the vibration motor is going. The speakerphone grille at the back and the earpiece at front are both arrays of pinholes no doubt cut with a laser through the polycarbonate. On the front, the notification LED (which shines green or amber) shines through one of the small holes. The only unfortunate part of this is that it’s hard to see the notification LED from extreme angles. At far right is the 1.3 MP front facing camera.

HTC has opted to place the microUSB port about one quarter of the way down on the left side of the phone. The result is that it’s possible to hold the device in portrait and type like normal without the cable poking into your hand. I also suspect that HTC has placed the majority of the PCB up top, and left the bottom three quarters of the device for the internal battery.

The rear of the device is again a softly textured finish. Our HTC One X is a dark, almost black color, but there’s also a white version as well. The white revision indubitably hides scuffing better than our black unit, though so far loss of texture at the contact points on the One X has been minimal. The surface roughness from HTC's bead/sand blasting is very high frequency, which is what makes it somewhat prone to appearing shiny after rubbing on planar surfaces. Interestingly enough I noticed that Nokia moved to a lower frequency surface texture on the Lumia 900 to combat this. I'm sure we'll eventually see HTC do something similar eventually. That said again the scuffing is minor.

There are five pogo pads at right for using a dock or accessory. I’m not sure whether the HTC Car Kit uses these pogo pins, but we’ve seen HTC and other OEMs use these for audio, power, and USB data signaling before. The camera module bulges out gently from the top center with a single LED flash at right.

The obvious mainstay of the One X is the 4.7" 720p infinity display which has a gentle curve at the left and right edges. The display isn’t curved, however the overall design makes it almost feel that way. Up top, HTC has done an excellent job hiding the ambient light and proximity sensor. I can spot the ambient light sensor, but it’s subtle, and I have no idea where the proximity sensor is, which is awesome. At bottom are the three capacitive buttons, which means the menu button becomes part of the UI for legacy applications that haven’t fully integrated it yet. I have no complaints with the capacitive buttons, this is something that has long since been completely settled and squared away. They’re backlit as well if the ambient brightness level is low enough. The result is even more vertical real estate than the Galaxy Nexus’ 720p display provides.

Overall I can’t understate how great the One X feels as a whole. It’s a new type of minimalism for the handset maker - mature, less chintzy and flashy like so many other Android devices. My only gripe is that the black color shows scuffs and loss of texture (from rubbing other solid surfaces at the contact points) more than I’d like - the white model probably makes more sense purely because I can’t imagine that showing.

What’s really interesting to me is just how many recent handsets from so many other OEMs have taken a similar design approach - microSIM, unibody polymer construction, no microSD card slot, and non removable battery. That combination of features seems necessary if you’re going to craft a device with competitive form factor this generation, and no doubt even more vendors will update with that profile. Polymer makes sense because it’s both a material transparent to RF, and easy to machine, and going with a microSIM makes sense since it’s all about minimizing area that isn’t dedicated to battery.

Next up is our specifications table. Again the chief differentiator between AT&T’s One XL turned One X is that the device has a Qualcomm Snapdragon S4 MSM8960 SoC, this is the first 28nm dual core Krait based part, and marks our first smartphone with it inside. The two krait cores are clocked at up to 1.5 GHz, and MSM8960 includes Adreno 225 graphics. The AT&T One X also includes 16 GB of onboard storage, and again there’s no microSD card expansion option.

Physical Comparison
  Apple iPhone 4S Samsung Galaxy S 2 Samsung Galaxy Nexus (GSM/UMTS) HTC One X (AT&T)
Height 115.2 mm (4.5") 125.3 mm (4.93") 135.5 mm (5.33") 134.8 mm (5.31")
Width 58.6 mm (2.31") 66.1 mm (2.60") 67.94 mm (2.67) 69.9 mm (2.75")
Depth 9.3 mm ( 0.37") 8.49 mm (0.33") 8.94 mm (0.35") 8.9 mm (0.35")
Weight 140 g (4.9 oz) 115 g (4.06 oz) 135 g (4.8 oz) 129 g (4.6 oz)
CPU Apple A5 @ ~800MHz Dual Core Cortex A9 1.2 GHz Exynos 4210 Dual Core Cortex A9 1.2 GHz Dual Core Cortex-A9 OMAP 4460 1.5 GHz Dual Core Qualcomm Snapdragon MSM8960
GPU PowerVR SGX 543MP2 ARM Mali-400 PowerVR SGX 540 @ 304 MHz Adreno 225
RAM 512MB LPDDR2-800 1 GB LPDDR2 1 GB LPDDR2 1 GB LPDDR2
NAND 16GB, 32GB or 64GB integrated 16 GB NAND with up to 32 GB microSD 16 GB NAND 16 GB NAND
Camera 8 MP with LED Flash, Front Facing Camera 8 MP AF/LED flash, 2 MP front facing 5 MP with AF/LED Flash, 1.3 MP front facing 8 MP with AF/LED Flash, 1.3 MP front facing
Screen 3.5" 640 x 960 LED backlit LCD 4.27" 800 x 480 SAMOLED+ 4.65" 1280x720 SAMOLED HD 4.7" 1280 x 720 LCD-TFT
Battery Internal 5.3 Whr Removable 6.11 Whr Removable 6.48 Whr Internal 6.66 Whr

To be totally honest, I always found the Sensation’s industrial design to be world class, it was a few other devices with carrier influence that showed definite drift away from HTC’s unique vision. Keeping that from happening with the One series should be the next big concern for HTC.

Software - ICS with Sense 4
POST A COMMENT

137 Comments

View All Comments

  • Tryad - Tuesday, May 01, 2012 - link

    The Sprint version has a larger battery and some other hardware changes, I was wondering if Anand is planning on reviewing it so we can see how much the battery changes add and other stuff like Bloatware compares to this one. Reply
  • Impulses - Wednesday, May 02, 2012 - link

    Slightly larger battery, kickstand, camera button, microSD slot, and a completely different casing made mostly out of aluminum (and some glossy plastic). Aesthetics aside, I don't see how it can be anything but an improvement, unless the CDMA stack gets bungled and it somehow wrecks battery life.

    Sprint has been pretty good about bloatware lately too, they were one of the first carriers to let you uninstall/hide some of their bloat even before ICS allowed it (most of my EVO 3D's built in apps could be removed/hidden, not all tho).

    Their network is another story but since there's no VZW in Puerto Rico and AT&T treated me like crap I'll stick with Sprint for now, the EVO LTE helped their cause a bit too.
    Reply
  • NeoteriX - Wednesday, May 02, 2012 - link

    It wouldn't be the first time a Sprint CDMA version of a phone suffered worse battery life than the GSM version... Reply
  • Impulses - Tuesday, May 01, 2012 - link

    Thanks so much for putting out this review this quickly, I know carriers often have a hand in what phones you get to review etc (this one in particular being pre release) but AT reviews continue to be a cut above anything else on the web.

    I seriously don't understand how you can be the only site out there that has a standardized method for battery life testing... Even beyond that tho, AT's reviews are simply the most informative, detailed, and less subjective phone reviews out there, bar none.
    Reply
  • Impulses - Tuesday, May 01, 2012 - link

    Oh and I'm looking forward to the One S and international variant reviews... I'm not even getting any of these phones but I still appreciate the work a lot. Any clue if you'll eventually get an EVO 4G LTE in for review? :p Reply
  • antef - Wednesday, May 02, 2012 - link

    How did you remove the "AT&T" in the upper-left corner of the display in the status bar? Engadget had it displaying there in all of their pics. I would like to be able to remove that as well if I bought this since I don't need a reminder that I'm on AT&T's network. Reply
  • Impulses - Wednesday, May 02, 2012 - link

    It's kinda curious AT&T is the only carrier doing that, and rather annoying since it's wasted notification space. Kinda redundant too considering they also silk screen it on the phone itself and it's also displayed within the notification pane and/or the lock screen (what everybody else does). Reply
  • 1ceTr0n - Wednesday, May 02, 2012 - link

    Simple, its marketing, like it or not. Likely will need to root phone and load different ROM to get rid of it Reply
  • antef - Wednesday, May 02, 2012 - link

    I see it in some of the author's pics and not others. What's the deal? Reply
  • Impulses - Wednesday, May 02, 2012 - link

    Apparently AT&T tag disappears when you actually have notifications, so at least they did that right. Reply

Log in

Don't have an account? Sign up now