As someone that used to do a lot of traveling for implementation and training work, I was always at the mercy of the projector that companies would provide me for training. Usually this was fine, but sometimes I got stuck with an ancient projector that only did 640x480 resolution, which couldn’t even handle the applications I was trying to train people on. Trying to pack and lug a projector across the country was out of the question as it was an expensive, and backbreaking, proposition.

Thankfully technology moves on and improves, and today we have solutions for these situations. One solution is the ASUS P1 Portable LED Projector. Using a DLP chip and an LED light source, this sub-1 pound projector manages to put out 1280x800 pixels and 200 ANSI lumens, and it would even fit inside the bag that holds my 11.6” MacBook Air. Most projectors that I use are for home theaters and have lenses that are larger than the P1, so I was a bit skeptical of it when I first saw it, but eager to give it a try.

The P1 is very simple on the outside, with a single focus control but no zoom for the lens, a few buttons to control an on-screen menu system, and ports for the PSU and a break-out cable. The only inputs supported are VGA and Composite Video, with no digital video inputs available. A variety of resolutions are supported, but as mentioned the native resolution of the DLP chip is 1280x800 and other resolutions may result in scaling and artifacts. Using a MiniDP to VGA adapter I hooked up my MacBook Air to the P1 in my living room, as the lighter colored walls and ambient light there were similar to what I found when traveling. Using a white wall, or a projection screen, would result in a better image but with a projector like this, you often don’t have such luxuries.

The closest resolution the MacBook reported as supporting was 1280x768, which results in a 34-pixel crop at the bottom of the screen, but otherwise there's no scaling or other issues. One concern that people will have when they see this is the 200 lumens rating, as that seems quite small in comparison to other projectors. Since the P1 uses an LED light source, you can expect those lumens to be very constant throughout the life of the projector, unlike conventional projection bulbs that can easily lose 25% or more brightness in less than 500 hours of usage. Also, the P1 is likely to be used in smaller rooms and settings than a 2,000 lumen monster, and typical screen size will be closer to 60” than 150”, so for business use you will probably find this to be enough light.

In my less than ideal setup, I was around 5’ from the nearest wall and the projected image was certainly bright enough to clearly see with all the room lights on and some sun shining in. The 50” plasma next to it was certainly brighter, but I can’t throw it into my bag and carry it with me. The short throw ratio of the P1 meant the image I had on the wall was right around 62” diagonally, which was nice and large. Bringing up a spreadsheet and a presentation it was easy enough to read the cells and the information, though adding a little bit of zoom inside of Excel helped. Darker material, such as nighttime video, was a little bit hard to make out, but for business use you won’t have an issue seeing anything.

A nice feature in the P1 was automatic keystone correction when the flip-stand under the projector is enabled. While any sort of image correction like this will add some artifacting if you look, it wasn’t clearly noticeable when just using a spreadsheet or other business application, and it happened transparently when adjusting the P1. This can be adjusted in the menu system as well, but the automatic nature of it was nice and easy.

For the most part the P1 worked very well for its intended use. It’s very small and easy to pack, and puts out a bright enough image that you can get a very reasonable size in a lit room that people can easily see. However, it wasn’t without some faults that I would like to see improved in the future.

I would like to see a digital video input of some sort in the future, either DVI or Micro HDMI or DisplayPort would be nice; an MHL port for phones and other devices that are starting to implement those would be useful as well. Secondly, with the lightweight nature of the P1, the breakout cable for VGA and Composite video was fairly heavy and was enough to easily shift the projector around on my table. Either a lighter cable, a tackier material on the bottom of the projector, or positioning the cable at the rear where it is less likely to cause a shift to one side would be good.

The fan noise in the standard mode was a bit loud, though that is the case for a lot of projectors. LEDs are power efficient, but they do seem to generate a lot of heat and something has to dissipate that. The rated sound output is only 29dB, but that is in Theater mode that dims the output so not as much cooling is required. Finally, an option in the menu system to change the On Screen language would be nice. This is something that would almost never occur to me, except that the unit I received seems to be in German and reading the English manual revealed no way to change that on my own. Doing a Reset All allowed me to pick a language, but this wasn't mentioned in the manual, so hopefully this will be addressed.

While not without some minor quibbles that I find in almost any product, the ASUS P1 wound up being a pretty nice little projector to use. The only other LED projectors I had used in the past were $30,000 units so I had no idea what to expect from one selling for $500, but for the price it was a decent little unit. The output was nice and sharp, though with any projector with text you’ll want it a bit bigger than you would on your normal display. It was small and compact enough to throw into the included bag and carry around with me, and light enough that I wouldn’t notice the extra strain on my shoulders. For someone that travels a lot, or needs a projector they can easily move around all the time, the ASUS P1 is definitely worth a look.

Specifications of ASUS P1 LED Projector
Resolution 1280x800
Throw Ratio 1.12
Lumens 200 ANSI
Contrast Ratio 2000:1
Weight 0.91 lbs.
Dimensions (WxHxD) 4.94" x 1.32" x 5.12"
Price $499

POST A COMMENT

30 Comments

View All Comments

  • cheinonen - Wednesday, February 22, 2012 - link

    To put 200 lumens in perspective, the JVC X30 projector (shown in the gallery) lights up my 122", 2.40 home theater screen and puts out under 800 lumens calibrated. The ASUS isn't going to put out nearly as large an image, and will likely have to deal with more ambient light, but 200 lumens is enough for its intended purpose. Reply
  • Guspaz - Wednesday, February 22, 2012 - link

    Cree makes single LEDs (the XL-M) that does 1000 lumens at 10W... And you could always combine multiple lower-power but more efficient LEDs... So why only 200 lumens? Reply
  • ShieTar - Wednesday, February 22, 2012 - link

    There are several parts within an imaging optical system where light is lost. I would be surprised if this system gets more than 50% of the light generated to your wall.

    On top of that, the projector needs 3 lightsources (R,G,B) instead of just one, and I read that one of the three is much harder to get to high power than the other two. Don't remember which one, though.

    The problem with multiple LEDs is, that you need bigger optics to image a large source onto your DLP. That contradicts the whole concept of the compact beamer.
    Reply
  • ciparis - Thursday, February 23, 2012 - link

    That is a really great-looking projector. I haven't even read the review yet, but I'm already inclined to like it. Reply
  • MobiusStrip - Thursday, February 23, 2012 - link

    The lack of HDMI or DisplayPort is a bit ridiculous. Reply
  • Stuffster - Thursday, February 23, 2012 - link

    My Windows 7 devices all seem to support 1280x800.

    I once owned a screen that worked perfectly except for the lower little bit of the display. Since PCs are ubiquitous and inexpensive, I'm not clear on why the reviewer didn't just hook up a PC. It would have been nice to see the review done on a computer that at least shows all the pixels that the projector is putting out.

    Just sayin'.
    Reply
  • cheinonen - Sunday, March 04, 2012 - link

    I don't have a laptop that's a PC unfortunately, and a projector like this is going to be used with a laptop instead of a desktop usually. The cropping of 34 pixels isn't a huge deal, but it's also relevant to the review so people can know that this might happen with their laptop as well. It might just be the MacBook Air, or it might be what some chipsets detect from the projector itself. Reply
  • jsandhill - Thursday, April 12, 2012 - link

    Looks awesome..

    I've been looking into these LED projectors and I found some great ones on ebay and amazon:
    ledprojectortips.blogspot.com/2012/03/buying-led-projector-from-ebay.html
    Reply
  • jsandhill - Thursday, April 12, 2012 - link

    I meant
    http://ledprojectortips.blogspot.com/2012/03/buyin...
    Reply
  • HannahNguyen - Monday, April 16, 2012 - link

    I really enjoyed reading your thoughts on the ASUS P1 <a href="http://www.hitachi.com.au/dps.html">led projector/a>. As a sales consultant, we are prone to a lot of traveling for business visits so a machine that is small and lightweight would be ideal for my partner and I. At first we looked into some other projectors, as you your point mentioned above, there are some with larger lenses which I thought may be more beneficial to us. However, it really comes down to performance and how easily it is to transport in our situation. As long as the size of the lens does not interfere with the quality of vision the actual size is lo longer a concern. According to your review, there doesn't seem to be any real issues besides some technicalities and personal suggestions so we will definitely be considering the ASUS p1. Thanks again for your detailed review, it has really helped me. Reply

Log in

Don't have an account? Sign up now