ASUS E35M1-M Pro Review - Anyone For Fusion?
by Brendan van Varik on October 25, 2011 5:00 AM EST- Posted in
- Asus
- Motherboards
- Fusion
- E-350
Board Features
| ASUS E35M1-M Pro | |
| Market Segment | HTPC |
| CPU Interface | FT1 BGA |
| CPU Support | Fusion |
| Chipset | Hudson-M1 (A50M) |
| Memory Slots |
Two DDR3 DIMM Maximum 8 GB Non-ECC Unbuffered |
| Expansion Slots |
1 x PCIe x16 (x4 speed) 1 x PCIe x1 2 x PCI |
| Onboard |
5 x SATA 6 Gbps Ports 1 x USB 3.0 header 4 x USB 2.0 headers 2 x Fan Headers 1 x Front Panel Audio Connector 1 x SPDIF Out Connector |
| Onboard LAN | Realtek® 8111E PCIe Gigabit LAN controller |
| Onboard Audio |
ALC892 8-Channel High Definition Audio CODEC Supports DTS Surround Sensation Ultra-PC |
| Power Connectors |
24-pin ATX Power Connector 4-pin 12V CPU Power Connector |
| Fan Headers |
1 x CPU (3-pin) 1 x CHA (3-pin) |
| IO Panel |
1 x PS/2 Port 2 x USB 3.0 4 x USB 2.0 1 x HDMI 1 x D-SUB 1 x DVI 1 x eSATA 6 Gbps 1 x Gigabit Ethernet 3 x Audio Jacks |
| BIOS Version | 0506 |
| Warranty Period | 3 Year |
With regards to the networking and sound processors, ASUS have used the Realtek solutions. It is normal to see the Realtek chips onboard on a motherboard within this price range, but ASUS do occasionally use the Intel solutions on their higher end motherboards.
In The Box
2x SATA 6 Gbps cables
IO shield
1x CPU fan
Users guide
Driver DVD
No USB 3.0 bracket has been supplied but instead of the two SATA 6 Gbps cables which the manual stated, we received four cables in the box.
Software
As the software found with this board has been covered by both Ian in his ASUS P8Z68 Pro review and by me in the ASUS P8P67 review, I will just give you a quick run through. The software installation was easy - you have the choice to install all of the software which comes on the DVD or you can install each individual driver as you please. In our case, all of the drivers were installed in order to allow for a fair test.
From within the ASUS Suite II, you can overclock your system, change and apply fan settings, monitor temperatures and voltages, change the power saving settings to your requirements as well as being able to update the BIOS. There are no issues with this software from what I can see.
Facebook
Twitter
RSS
66 Comments
View All Comments
C300fans - Tuesday, October 25, 2011 - link
No, because 80sp is really really too weak for gaming.C300fans - Tuesday, October 25, 2011 - link
Even if a 800sp card, GDDR5 128bit is far enough. Can you tell the difference between HD 6790 and HD 6770? I could say, you will probably notice more on the price.silverblue - Tuesday, October 25, 2011 - link
The difference here is that the memory interface is shared by both the CPU and the GPU. It's not all about gaming, but the actual effective use of what's on offer.However, being a geek at heart, I wouldn't mind seeing what the turbo mode plus more memory bandwidth would do for light gaming as well as if the E-450 is only a tiny bit faster than the E-350 even with the extra bandwidth.
duploxxx - Tuesday, October 25, 2011 - link
its already been tested, between 5-10% more perf in general tasks with same consumption. Not bad at all for a small update. No graphics tested yethttp://asia.cnet.com/product/hp-pavilion-dm1-amd-f...
lestr - Tuesday, October 25, 2011 - link
Lap top/netbook review, does not equal desktop especially in a "review" that is a mere single page, maybe two, max. The 350 OC's to ~1.8 +/- and with memory upped to 1600 on a 6320 graphics core the results might be more interesting especially since folks are only now beginning to understand how to OC an APU properly. Drop the mult, crank the FSB for graphics and raise both to stable. That noted, it's certainly not about gaming but over all performance. 80SP's isn't much but more power/speed wouldn't hurt, now would it? 160 would be great. Maybe CPU can get to 2.0 or greater...
Also promised are reviews geared more toward HTPC use rather than gaming... that's like trying to take out an elefunk with a BB gun. Not much point in even going there.
Actually I am more interested in what is going to replace the M50 - 350/450 line - Jan? For now it looks like they're trying to deplete 350 inventories before bringing the 450 here. Even so, a lot of people would like to know.
thanks it's nice to see the interest.
rburnham - Tuesday, October 25, 2011 - link
This board seems too big for an HTPC and too underpowered for a gaming rig. Most people I know who use their computers for basic things (web browsing, spreadsheets) already have laptops and they prefer the portability over a desktop. I am not sure where this board fits in.mino - Wednesday, October 26, 2011 - link
This board is actuall;y great for HTPC for a very important reason - there are people who actually _need_ more than a single PCIe or PCI slot ...But otherwise, the real target would be cheap PC's for kids, secretaries and the like.
jrs77 - Tuesday, October 25, 2011 - link
I'm owning a Zotac IONITX A-E (used as NAS/webclient), an Asus AT3IONT-I Deluxe (used as HTPC) and a Lenovo Thinkpad x121e E350 (for travelling and whatever). All of them are basically the same when it comes to powerconsumption and they're all up to the task of playing Full HD-media.People will allways moan about the low-power CPUs of those systems, but if you don't do anything else then browsing the web and playback some media, there's nothing to complain about really. These systems even run older games perfectly fine, or they make for a good system to run a second client for EvE Online, etc.
Geofram - Tuesday, October 25, 2011 - link
In windows, will it stream Netflix without a problem?I used to have a Atom based HTPC, and HD content on Netflix wouldn't properly use the GPU acceleration, and hence, it wouldn't play smoothly. Something in the Silverlight acceleration didn't detect and use GPU for everything, and would fall back to CPU. So I'm more worried about that than I am about if it will play a Blu-ray, yet it's something I never see checked.
RayMort - Wednesday, October 26, 2011 - link
This is exactly what I need to know too. My 6 year old PC with an AMD 3500 dual core processor can't decode Netflix HD streaming for the same reasons. I want to upgrade, but I want to be sure it will do Neflix HD before I purchase.