Power Consumption

Unsurprisingly, power consumption hasn't changed much in the past year. The Thunderbolt Display draws a bit less at its dimmest setting (likely just panel efficiency variance) and draws a bit more at max brightness:

LCD Power Draw (Kill-A-Watt)

LCD Power Draw (Kill-A-Watt)

While powering a 15-inch MacBook Pro and reading data from an attached Pegasus R6 (copying to a local SSD at around 200MB/s) I measured total power consumption for the display (max brightness) at 179.6W. That number could go up if the battery in the MBP was near empty and thus being charged at a higher rate.

Display Testing - Brightness/Contrast & Uniformity Multi-monitor with the Thunderbolt Display
Comments Locked

275 Comments

View All Comments

  • repoman27 - Tuesday, September 27, 2011 - link

    I'm just going off the information available, like everyone else. Which is why probably half the statements I've made about TB thus far have turned out to be inaccurate.

    But the TB port is electrically equivalent to a mini DP port. There are no additional contacts. A TB port operates in either DP compatibility mode or in TB signaling mode. The 4 pairs of signaling wires are used for either 1 DP main link Tx or 2 TB bi-directional channels, both of which are capable of transporting (tunneling) a DP main link. As far as I can tell at least.

    I posted a block diagram earlier, which I'll post again here, although I need to clean it up a little as my current theory of things Thunderbolt is now a bit more plausible. http://i54.tinypic.com/8zdwci.jpg
  • repoman27 - Monday, September 26, 2011 - link

    I just noticed that my math was a little too quick and dirty. There's only one FireWire 800 port on the ATD, not two. So actually a second USB 2.0 controller or memory card reader were not out of the question at all, and probably just failed to make the cut due to cost.

    An optical drive would have required a SATA controller, which wouldn't have fit within the bandwidth limitations, and altogether would have added about another $50 to the price tag.
  • repoman27 - Sunday, September 25, 2011 - link

    I find it bizarre the number of tinfoil hat conspiracy theorists that post comments on every review of an Apple product saying that the review was biased or nothing but a paid advertisement. I’m not sure how you could read this article and not believe that it was anything other than the most objective, informative and detailed review of the ATD yet published.

    Some points for consideration:

    There are plenty of reviews on Anandtech for products made by manufacturers that also advertise on Anandtech, yet these are never called into question. It’s just Apple, who to my knowledge have never actually advertised on a review site.

    While Apple does submit products for review, Anand went out and additionally bought his own ATD to dissect, so he actually paid Apple this time around. I doubt his review unit came packed in a box full of cash.

    There are no generally negative reviews posted on sites like these because the authors tend to spend their time reviewing products that have merit. Most of the major manufacturers don’t make a habit of bringing to market products that are clearly defective or devoid of any useful functionality. Apple makes solid products, and therefore gets a lot of positive reviews. Not that they are by any means above critique, but their standards tend to be higher than many of their competitors.

    Being objective is not the same as being impartial. The biases of reviewers will always show up in what they write, but stating opinions does not necessarily diminish the objectivity of the data presented.

    People who can’t figure out the timing of the posts on this site are baffling to me. When AMD, Intel or NVIDIA release new products, we get a quick blurb when it is announced and a full review a few days after it ships. When MWC is going on you get a ton of mobile device news, when IDF is going on you see a mess of Intel related posts, when BUILD is happening you’ll have a bunch of Microsoft stuff to check out. Yet so many people submit comments saying that this site has jumped the rails when WWDC results in a week of Apple posts.

    Why did the ATD get an in depth review? Because it marks the release of a highly anticipated piece of tech which was surrounded by many unknowns due to the fact that it actually forges into some new territory. Is there really a good reason why this site would NOT review this device? The only reason I can think of would be if a competitor had paid them off.

    If all those bitching about the quality or integrity of this site can point to better, more objective, more in depth reviews of these products, please feel free to cite references.
  • Brigga - Sunday, September 25, 2011 - link

    As simple and probably silly as this sounds why doesn't apple have a docking station? Port replicators suck, but docking stations can be quite unobtrusive and easy to use (ie. no disconnecting of cables and second power supply stays where it is).
  • repoman27 - Monday, September 26, 2011 - link

    Yeah, actually Apple solved the problem that way for five years back in the early nineties. The PowerBook Duo line had a docking port that worked with the Duo Dock and several other docking accessories. I'm guessing that they have enough bad memories of the problems inherent with those designs that they're shooting for a slightly different approach now.
  • pesos - Sunday, September 25, 2011 - link

    I went out and picked up a TB display last night to pair with my 2011 mbp. I live in windows about 95% of the time and expected there to be no issues with the basic usb hub built into the display – unfortunately that does not seem to be the case. My Apple usb keyboard (also brand new) and dell usb mouse both hang/freeze/work erratically when connected to the back of the display, as does my Jabra pro headset. I can make the behavior 10 times worse simply by using hardware built into the display, such as the facetime camera. If I fire up Lync and start a video chat, my keyboard and mouse become nearly unusable. My basic testing under Lion appears to confirm this is an issue with Apple’s boot camp drivers as things work fine under OS X. Problem occurs both with win7 and win2008r2.
  • shin0bi272 - Sunday, September 25, 2011 - link

    first world problems...
  • Oli56 - Sunday, September 25, 2011 - link

    Anand, great review but it seems you completely overlooked the impact of the glass which can be negative to some users. I owned an iMac some time ago and the glass reflections were very disturbing to me and led to ocular fatigue. It is unfortunate Apple has moved to glass display for all its line of screens, fortunately we can still have a MacBook Pro with mate display as option but that doesn't exist for a 27" IPS screen which should really benefit from it. So basically glass maybe looks cool on display but when this is about to work all day with it, this is a nightmare. This is the only thing keeping me away from that screen, as the rest of it looks great.
  • dmaffei - Monday, September 26, 2011 - link

    You never fail to impress... nice job old friend!!!

    Dan :-)
  • StefanoT - Monday, September 26, 2011 - link

    so this really, really, is an Apple Display without DisplayPort?!
    If I'm not mistaken, just the other day DisplayPort was the way to the future, touted to eventually supersede DVI/HDMI. Indeed, it was almost too new to be widely supported! DisplayPort-enabled monitors, in my part of the world, are still few and far between. I was still waiting for the DisplayPort goodness to free me from carrying all sorts of miniDP adapters. To DVI, to HDMI, even (gosh!) to VGA!
    And now, suddenly, DisplayPort is to fall into oblivion, no longer supported by Apple, which was one of the main proponents and, ironically, now supports a standard that is built-on and, in a way, includes DisplayPort, and on top of that shares the same connector.
    Anand points out that the company has never got emotional about legacy stuff. If they did, the new technology would never get adopted. Apple is leaping to the future and can't get stop to deal with yesterday's interfaces. I would say that between one leap and another, you need to "land" somewhere. I'm not a fan of never-ending legacy support, but I'm still waiting for VGA to disappear from mainstream netbooks. Are they suggesting that I either ditch my oh-so-non-2011 devices (i.e., "not-released-in-2011", as opposed to "not-bought-in-2011") in order to use their new display, or that I buy an old, "non-Thunderbolt" version of their display, which sells for the same price? This doesn't make sense any way you put it... and to think that they had it so easy with Thunderbolt. The thing seems built with backward compatibility in mind.
    I didn't get if future displays will eventually support both DisplayPort and Thunderbolt. Perhaps once Intel makes it piece-of-cake easy, as opposed to "just add a chip to that big motherboard you've got back there, behind the glass". Perhaps once other companies start offering it. Or perhaps never, because why should Apple not leapfrog everybody again (including its customers), by switching to an all-new technology next year?

Log in

Don't have an account? Sign up now