Performance Testing

Before I go any further, just a warning that this is dense, and even for me there are an almost overwhelming number of tables. I struggled with how to present data and settled on the format below, which consists of individiaual tables and a few graphs at the end in case you're a visual person. There's a third option however, which is the google docs spreadsheet I used while collecting data. I've made it public for your enjoyment and it contains the exact same data. (Update: Google Apps is acting wonky and not letting me share the spreadsheet quite yet—it will be posted in a little while. Update 2: Here we go, finally got the link to the spreadsheet for your persual)

First up is the received signal strength, which will show just how much difference that extra ~140 mW will buy. In reality, it’s surprisingly hard to see the difference, but again that increase in strength is only a few dBm, so I suppose it not being very dramatic here is to be expected since this is also a logarithmic scale. That said, the Gen 5 does post numbers correspondingly above the Gen 4 on average; remember that closer to 0 is higher power and thus better. The difference is actually more visible on 2.4GHz than 5GHz based on these numbers.

agrCtlRSSI (dBm) Comparison—2.4GHz (Closer to 0 is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) -46 -44 -45 -40
Hallway (2) -52 -50 -52 -52
Downstairs (3) -71 -70 -77 -77
Kitchen (4) -84 -81 -85 -84

agrCtlRSSI (dBm) Comparison—5GHz (Closer to 0 is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) -47 -48 -44 -47
Hallway (2) -59 -60 -54 -52
Downstairs (3) -81 -81 -82 -81
Kitchen (4) N/A N/A N/A N/A

Next is MCS (Modulation Coding Scheme) which shows how fast the card is connecting to the 802.11n network. Here we can see how much the 5th generation airport extreme improves MCS selection in a number of cases, especially the three spatial stream scenarios on the 2011 MacBook Pro.

MCS Comparison—2.4GHz (Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Lenovo X300
(Intel 6300 3x3:3)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 22 23 14 15 23 23
Hallway (2) 11 22 13 15 22 22
Downstairs (3) 4 12 0 11 21 13
Kitchen (4) 0 8 0 9 5 12

MCS Comparison—5GHz (Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Lenovo X300
(Intel 6300 3x3:3)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 23 23 15 15 23 23
Hallway (2) 21 22 15 14 12 22
Downstairs (3) 1 9 1 2 5 5
Kitchen (4) N/A N/A N/A N/A 3 3

Locations 3 and 4, which are in challenging environments, see massive increases, previously going from the lowest possible (or not even 802.11n) rate up to much faster rates on both MacBooks.

AFS is our next test, where we transfer a 500MB zip file up and down from an AFS server and average the throughput. On the downstream side of things, the improvements aren’t substantial until we’re in a challenging RF scenario downstairs;, here the new generation wireless card in the Airport Extreme makes a huge difference in throughput on 2.4GHz, and similarly on 5GHz, though at the farthest location it’s still impossible to connect to 5GHz.

AFS File Transfer Performance (Downstream)—2.4GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 97.3 96.8 64.2 76.6
Hallway (2) 85.5 90.5 65.3 71.8
Downstairs (3) 2.67 68.7 2.1 39.4
Kitchen (4) 1.34 33.6 N/A 16.5

AFS File Transfer Performance (Downstream)—5GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 140.6 148.4 95.3 122.9
Hallway (2) 86.3 130.9 84.9 99.5
Downstairs (3) 16.1 39.3 6.6 19.5
Kitchen (4) N/A N/A N/A N/A

When it comes to upstream, the results are dramatic both on 2.4GHz and 5GHz. Throughput is almost always over double, thanks probably in part to the better front end and receive sensitivity of the Airport Extreme’s new wireless stack.

AFS File Transfer Performance (Upstream)—2.4GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 54.0 128.6 52.6 81.5
Hallway (2) 45.3 105.1 30.9 78.1
Downstairs (3) 4.0 37.6 2.8 32.7
Kitchen (4) N/A 10.5 N/A 15.3

AFS File Transfer Performance (Upstream)—5GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 186.7 214.5 150 134.2
Hallway (2) 175.2 195.8 145.7 119.5
Downstairs (3) 19.8 34.3 11.6 21.6
Kitchen (4) N/A N/A N/A N/A

Iperf is finally up, which we can run on the X300 in addition to both Macs. Here on downstream the results are improved pretty substantially for the 3x3:3 2011 MacBook Pro, and across the board for the challenging downstairs RF scenarios. The same applies on 5GHz as well, and in the best case, we can push nearly 300 Mbps on the new MacBook Pro. It’s a dramatic improvement in best case throughput if you have the right card, though the Intel card ends up performing similarly on 5GHz with both the new and old Airport Extreme card. More on that in a second.

iperf 2.0.5 (Downstream)—2.4GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Lenovo X300
(Intel 6300 3x3:3)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 112 161 71.9 87.4 88.3 84.8
Hallway (2) 91.7 138 69.1 78.1 75.8 84.7
Downstairs (3) 5.89 117 2.22 46.9 51.9 68.7
Kitchen (4) 1.49 35.2 N/A 23.7 14.4 46.1

iperf 2.0.5 (Downstream)—5GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Lenovo X300
(Intel 6300 3x3:3)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 213 311 92.2 136 101 112
Hallway (2) 119 243 95.4 97.2 98 106
Downstairs (3) 17.5 47.9 6.83 21.3 41.5 57.5
Kitchen (4) N/A N/A N/A N/A 13.8 11.1

On the upstream with Iperf things improve dramatically across the board on 2.4GHz, and marginally improve on 5GHz with the new WLAN card inside the Airport Extreme.

iperf 2.0.5 (Upstream)—2.4GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Lenovo X300
(Intel 6300 3x3:3)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 57.7 159 64.2 97.7 65.1 126
Hallway (2) 33.1 120 24 98.4 42.3 113
Downstairs (3) 4.42 36.7 4.26 33.6 20.6 38.4
Kitchen (4) 1.89 11.6 1.50 8.51 7.39 21.1

iperf 2.0.5 (Upstream)—5GHz (Mbps—Higher is Better)
  2011 MacBook Pro (BCM4331,3x3:3) 2010 MacBook Pro
(BCM4322,2x2:2)
Lenovo X300
(Intel 6300 3x3:3)
Apple Airport Extreme 4th Gen 5th Gen 4th Gen 5th Gen 4th Gen 5th Gen
Office (1) 215 302 168 191 154 148
Hallway (2) 196 252 169 174 150 144
Downstairs (3) 15.4 41 7.97 22.9 26.8 39.4
Kitchen (4) N/A N/A N/A N/A 7.55 8.66

At the end of the day, the new Airport Extreme dramatically improves throughput in the best case and in a few regions where signal was previously unusable. In the worst case (location 4), performance improves from being essentially unusable to totally fine, and in the case of the 2010MBP goes from not being able to connect at all to pushing 23 Mbps.

So the unanswered question is how the 3x3:3 2011MBP manages to be much faster compared to the 3x3:3 Intel 6300 card, and I suspect the answer might be that the combination of BCM4331 on the client and BCM4331 on the AP enables Apple to use Broadcom’s frame bursting high speed modes—aka modern speedbooster. Careful observers will note in addition that while Iperf over 40 MHz 802.11n (with a link rate of 450 Mbps) delivers 311 Mbps of downstream, the same test on AFS is around 150 Mbps down, possibly due to compression. In addition, note how the Intel card lags behind in locations 1 and 2 until signal gets lower and then becomes competitive again. To me, this definitely seems to indicate some Broadcom-to-Broadcom enhancements are at play. Frankly for Apple this makes sense considering their top to bottom ecosystem control; if you have the ability to choose the card in the AP and the client, why not go with a solution that offers benefits?

Airport Extreme vs. Time Capsule

The next question is how the Time Capsule compares. Rather than re-run all 128 data-points (and then multiple tests per scenario for the purposes of averaging and removing outliers), I decided to use a subset and see whether performance and range is the same on the Time Capsule in those cases. As we showed before, the Time Capsule and Airport Extreme use the same exact wireless card, though gain is different on the Time Capsule antennas than the Airport Extreme.

For this testing, I just used the 2011MBP with its 3x3:3 radio, and ran through signal measurements and Iperf. First up is how signal strength looks.

agrCtlRSSI (dBm) Comparison (Closer to 0 is Better)
  2.4GHz 5GHz
  Airport Extreme Time Capsule Airport Extreme Time Capsule
Office (1) -44 -41 -48 -49
Hallway (2) -50 -51 -60 -60
Downstairs (3) -70 -68 -81 -83
Kitchen (4) -81 -81 N/A N/A

You can pretty much immediately tell that things are very similar. On 2.4GHz and 5GHz the two are very comparable except in a few odd cases. Of course the propagation isn’t going to be identical between the two, but subjectively it’s close.

Next is MCS, and here things are again close, with the Time Capsule narrowly edging out the Airport Extreme on 2.4GHz, and things being very equal on 5GHz. It’s looking the same so far.

MCS Comparison (Higher is Better)
  2.4GHz 5GHz
  Airport Extreme Time Capsule Airport Extreme Time Capsule
Office (1) 23 23 23 23
Hallway (2) 22 23 22 23
Downstairs (3) 12 13 9 8
Kitchen (4) 8 9 N/A N/A

So what about performance now with Iperf? On the downstream side of things, the Airport Extreme comes out on top narrowly in all but the second location on 2.4 and 5GHz. But the difference is minuscule.

iperf 2.0.5 (Downstream) (Mbps—Higher is Better)
  2.4GHz 5GHz
  Airport Extreme Time Capsule Airport Extreme Time Capsule
Office (1) 161 157 311 306
Hallway (2) 138 154 243 246
Downstairs (3) 117 103 47.9 44.9
Kitchen (4) 35.2 29.6 N/A N/A

Upstream is a similar story, with the two being very close outside locations 3 and 4, where the Time Capsule narrowly edges the Airport Extreme out on 2.4GHz.

iperf 2.0.5 (Upstream) (Mbps—Higher is Better)
  2.4GHz 5GHz
  Airport Extreme Time Capsule Airport Extreme Time Capsule
Office (1) 159 153 302 304
Hallway (2) 120 129 252 251
Downstairs (3) 36.7 55.5 41 32.1
Kitchen (4) 11.6 17.3 N/A N/A

All said and done however, the two are incredibly close and despite the difference in gain that the FCC docs would lead you to believe, are virtually indistinguishable in some real-world testing. In my mind, if you’re concerned about WiFi performance, the Time Capsule and Airport Extreme both perform equally well.

Graphs

If you're a more visual person and find that wall of tables and text too daunting, Anand also made some awesome graphs which I would be remiss to not reproduce here for your viewing pleasure.

First up is AFS performance compared on the 2011MBP between the 4th and 5th generation Airport Extreme.

 

Again the main improvements with AFS (real-world file transfer) happen out at the extremes where previously signal was unusable on 2.4GHz, and likewise on 5GHz. That really tells the story of the (sometimes dramatic) difference that the higher power WLAN solution in the 5th generation makes over the 4th generation.
 
Next are two charts showing again that for WiFi purposes the Time Capsule and Airport Extreme are virtually identical.

Within the margin of error, we see the Time Capsule and Airport Extreme perform very, very closely.

WiFi Testing Methodology Disk Performance - Airport Extreme vs. Time Capsule
Comments Locked

90 Comments

View All Comments

  • gman_wa - Tuesday, August 9, 2011 - link

    I bought a 5th Extreme when they came out a couple weeks ago and returned it based on the Meraki Wi-Fi Stumber java-based browser app.

    Maybe its my house, but with the 2nd gen and the 5th gen side by side, the 2nd gen signal strength was consistently ~5-10db stronger than the 5th ten. My 2nd gen runs the 2.4Ghz b/g/n network in the house and I wanted to replace this with something stronger and add the guest networking.

    I didn't actually try to compare throughput via wired or wireless.

    Maybe I got a dud? Or would the single radio on the 2nd gen model outperform the dual radio models?

    Thoughts?
  • applesandsynths - Wednesday, August 10, 2011 - link

    Hey guys,

    I just had a quick question for anyone who may have a new 5th generation Airport Extreme. Can you tell me if the power rating numbers on the AC adapter are:
    Input AC 100-200v 50-60Hz 0.5A Output: 12V 1.8A Model: A1202?

    I know that these are the numbers from an older adapter but was just wondering if the new adapters are any different?

    Thanks!
  • jackwong - Sunday, August 14, 2011 - link

    I have the 4th and 5th.

    They are both 1A instead of 0.5A and the model is 20BB A.
  • Lebannen - Wednesday, August 10, 2011 - link

    One thing I'm very interested in with regards to the Airport Extreme is noise. When connected to Airport Extremes (4th gen) over 5GHz, I can hear a reasonably loud noise when data transfer is occurring - elsewhere on the net I've heard it described as screeching and sizzling. I'm aware that it's all solid state so can only speculate that it's switching noise.

    It only occurs with 5GHz transfers, not with 2.4GHz, which *might* make it something to with the antenna configuration? If so, it may not have changed, but I'd be glad to hear either way - thanks :)
  • tichi - Thursday, August 11, 2011 - link

    Just wondering if two other features (not mentioned in the article) are supported in the new version of Airport Extreme :

    1) Can you clone mac address for those of us not using DSL?
    2) Can you still throttle the power output of the antenna?

    Thanks
  • layman2 - Sunday, August 14, 2011 - link

    It would be great if it had wireless internet i.e it gets internet over 3G or cDma networks and share it through wi-fi with other devices
  • Death666Angel - Monday, August 15, 2011 - link

    Hey guys!
    Really good article.
    I was wondering if you will be testing other 450mbps routers, too? You mentioned The Linksys E4200. What about the TRENDnet TEW-692GR which costs 20-30€ less than the Apple and about 5€ less than the Linksys, but seems to support both 2.4GHz and 5GHz with 450mbps simultaneously.

    Also, I have only found one WiFi adapter for 450mpbs for desktop PCs and that is a USB one called TRENDnet TEW-684UB. I have not found any PCI/PCIE cards that support 450mbps for the desktop. Is there any way to use mini-PCIE cards like the Intel 6300 in a desktop PC? Would it make sense to use a 450mbps access point as my WiFi card via ethernet?

    I would like to upgrade my WiFi system in order to stream HD content from my future file server to my media PC in my living room. My wife would kill me if I laid any cables for ethernet, so WiFi is the only way in this situation. I somehow feel like the higher WiFi offers are still very experimental. It's difficult to find decent reviews who test the products not just write down the specs.
  • Matt Campbell - Tuesday, August 16, 2011 - link

    Very nice, especially the FCC listings and teardown. The one thing I would have liked to see is how the internal drive speed compared to a NAS system like the My Book Live, Go Flex or other home NAS system, which would bypass the slow USB connection. I bought a 2 TB unit yesterday and am still reserving judgment vs. a router/NAS setup.
  • Amia - Wednesday, August 17, 2011 - link

    I saw this review and bought TC 2T but file transfer speed from TC to PC via GigE is no where near 80mbps,actually less than 40. Wonder how this test has been done (
  • Amia - Wednesday, August 17, 2011 - link

    Under 5g my Mac air is getting 270mbps but my another laptop which used to get 300mbps using my previous router can only have 150mbps. Maybe just like Mac air apple doesn't want you to use dual band (40mhz) under 2.4ghz

Log in

Don't have an account? Sign up now