Appearance, Cables and Connectors

760W

910W

There is no real difference between the cases except those power markings on the sides. Both have a small power switch under the input female plug and a usual black fan grille for the frontal 80mm fan. The housing is 18cm long, quite much for a PSU without a modular cable panel. The surface is very scratch-resistant.

760W

910W

Cables and Connectors (760W)

Fixed

Main 24-pin 50cm
ATX12V/EPS12V 8-pin 60cm, 4+4-pin 60cm
PCIe 2x 6-pin 60cm, 2x 6/8-pin 60cm
Peripheral 4x SATA 60-105cm / 4x SATA 45-90cm
4x Molex, 60-105cm / 3x Molex + 1x FDD 45-90cm

 

Cables and Connectors (960W)

Fixed

Main 24-pin 50cm
ATX12V/EPS12V 8-pin 60cm, 4+4-pin 60cm
PCIe 2x 6-pin 60cm, 2x 6/8-pin 60cm
Peripheral 4x SATA 60-105cm / 4x SATA 45-90cm / 4x SATA 35-80cm
4x Molex, 60-105cm / 3x Molex + 1x FDD 45-90cm

Both PSUs have nearly the same cable configuration and a high wire cross-section for the PCIe cable.  Moreover both are using a cheap black cable sleeving and the same length for all cables. The only advantage of the 910W model is the number of peripheral connectors. It has one cable more than the other version, equipped with four additional SATA plugs. Our only real point of criticism is that the 910W PSU could have more GPU connectors. Some ~1000W models have six PCIe plugs.

Scope of Delivery and Power Rating The Interior
Comments Locked

18 Comments

View All Comments

  • Kougar - Tuesday, August 2, 2011 - link

    I thought PC Power & Cooling was phasing out these units in favor of their Mk II series units? The Mark II's have pretty poor build quality and power characteristics all around, according to JonnyGuru.

    I owned one of the original 750 Quad Silencers... great PSU up until the point it slagged the EPS12V connector on an ASUS Rampage II... no safety mechanism or anything else kicked in, the PSU just kept running and eventually melted the metal pins and plastic connector while I was in a game of TF2.
  • Beenthere - Tuesday, August 2, 2011 - link

    The 760w and 910w PSUs are a new series of Silencer PSUs, not the older design that was phased out. The latest are Seasonic based while the Silencer II series is Sirfa based similar to OCZ branded models.
  • abscode - Wednesday, August 3, 2011 - link

    Perhaps I am in the minority, but I will pretty much never consider any PS without modular cables.
  • Beenthere - Wednesday, August 3, 2011 - link

    Many people like them but I prefer PSUs without modular connectors. To each his own.
  • 7Enigma - Wednesday, August 3, 2011 - link

    Honestly it depends on the case you are using. I was like you until I upgraded to a nice case that can hide any unused cables away from sight (and not block airflow). Then it''s just a minor nuisance when building the system. And it's one less point of connection failure.

    But honestly if the price was the same (or very close.....within 5%) I'd probably still go modular like you.
  • abscode - Wednesday, August 3, 2011 - link

    Currently using a Lian-Li PC-B10; a very nice case, I think. I'm also the kind of guy who shortens or extends then re-sleeves cabling so I can route and hide then exactly how I want. What a nerd! :)

    http://daphault.com/share/i7980x-2xl.jpg
  • MrRuckus - Thursday, August 4, 2011 - link

    I have a 910W Silencer that has been rocking for 2-3 years. Currently running 8 SATA Devices and a GTX 295 along with a 1090T X6 @ 4Ghz which runs 24/7. No problems what so ever. I think I paid $190 for mine back then. Great investment.
  • abscode - Wednesday, August 10, 2011 - link

    Diu nei lo mo!

Log in

Don't have an account? Sign up now