Back at IDF 2010, we wrote about Intel Light Peak nearing its eventual launch in 2011. Back then, the story was a 10 Gbps or faster physical link tunneling virtually every protocol under the sun over optical fiber. Though an optical physical layer provided the speed, in reality the connector and physical layer itself wasn’t as important as the tunneling and signaling going on beneath it. The dream was to provide a unified interface with enough bandwidth to satisfy virtually everything desktop users need at the same time - DVI, HDMI, DisplayPort, USB, FireWire, SATA, you name it. Daisy chain devices together, and connect everything with one unified connector and port. At IDF, we saw it moving data around between an Avid HD I/O box, a Western Digital external RAID array, and simultaneously outputting audio and video over HDMI. Intel also had another live demo working at over 6.5 Gbps. 

That dream lives on today, but sans optical fiber and under a different name. Intel’s codename “Light Peak” is now named Thunderbolt. In addition, instead of optical fiber, ordinary copper does an adequate enough job until suitably cheap optical components are available. It’s a bit tough to swallow that optical fiber for the desktop still isn’t quite ready for mainstream consumption - issues like bend radius and the proper connectors were already mitigated - but copper is good enough in the meantime. Thunderbolt launched with the 2011 MacBook Pro, and though the interface isn’t Apple exclusive, will likely not see adoption in the PC space until 2012. 

Although Thunderbolt in its launch instantiation is electrical, future versions will move to and support optical connections. When the transition to optical takes place, legacy electrical connector devices will work through cables with an electro-optical transceiver on the cable ends so there won’t be any need to use two separate kinds of cables. The optical version of Thunderbolt is allegedly coming later this year. 

Thunderbolt shares the same connectors and cabling with mini DisplayPort, however Thunderbolt cables have different, tighter design requirements to fully support Thunderbolt signaling. DisplayPort is an interesting choice since it’s already one of the fastest (if not the fastest) desktop interfaces, topping out at 17.28 Gbps in DisplayPort 1.2 at lengths of under 3 meters. At longer distances, physics rears its ugly head, and throughput drops off over electrical links. Of course, the eventual advantages of moving to photons instead of electrons are greater distance without picking up much latency. 

Thunderbolt is dual-channel, with each channel supporting 10 Gbps of bidirectional bandwidth. That’s a potential 20 Gbps of upstream and 20 Gbps of downstream bandwidth. The connection supports a daisy chain topology, and Thunderbolt also supports power over the cable, 10W to be precise. We aren't sure at this time what the breakdown on voltage/amperage is though.

Back when it was Light Peak, the goal was to tunnel every protocol under the sun over a common fast link. Multiplex everything together over one protocol-agnostic link, and then you could drop relevant data for each peripheral at each device in the daisy chain. Up to 2 high-resolution DisplayPort 1.1a displays and 7 total devices can be daisy chained. Thunderbolt instead carries just two protocols - DisplayPort and PCI Express. Tunnel a PCIe lane over the link, and you can dump it out on a peripheral and use a local SATA, FireWire, USB, or Gigabit ethernet controller to do the heavy lifting. Essentially any PCI Express controller can be combined with the Thunderbolt controller to act like an adapter. If you want video from the GPU, a separate dedicated DisplayPort link will work as well. Looking at the topology, a 4x PCI Express link is required in addition to a direct DisplayPort connection from the GPU. 

Apple learned its lesson after FireWire licensing slowed adoption - the Thunderbolt port and controller specification are entirely Intel’s. Similarly, there’s no per-port licensing fee or royalty for peripheral manufacturers to use the port or the Thunderbolt controller. iFixit beat Anand and me to tearing down the 2011 MacBook Pro (though I did have one open, and was hastily cramming my OptiBay+SSD and HDD combo inside) and already got a shot of Intel's Thunderbolt controller, which itself is large enough to be unmistakable:

Thunderbolt Controller IC on 15" 2011 MacBook Pro - Courtesy iFixit 

In addition, you can still plug normal mini Display Port devices into Thunderbolt ports and just drive video if you so choose. 

Though there aren’t any Thunderbolt compatible peripherals on the market right now, Western Digital, LaCie, and Promise have announced storage solutions with Thunderbolt support. Further, a number of media creation vendors have announced or already demonstrated support, like the Avid HD I/O box we saw at IDF. 

Thunderbolt already faces competition from 4.8 Gbps USB 3.0 which has already seen a lot of adoption on the PC side. The parallels between USB 2.0 / FireWire and USB 3.0 / Thunderbolt are difficult to ignore, and ultimately peripheral availability and noticeable speed differences will sell one over the other in the long run. Moving forwards, it’ll be interesting to see Thunderbolt finally realize the “light” part of Light Peak’s codename, and exactly how that transition works out for the fledgling interface.

POST A COMMENT

107 Comments

View All Comments

  • Nentor - Monday, February 28, 2011 - link

    What do they want to imply with it? Speed? Thunderbolts sure are fast, but also destructive, loud, bright, zigzaggy.

    It is like calling a small round candy "choke" to me.
    Reply
  • Kakureru - Monday, February 28, 2011 - link

    price = adoption level
    i wont be buying bridge devices that hold a very high cost for a very long time.
    first seeing them in apple products is bad since this adds a perceived value to
    it which will make other companies tie an un necessarily high price to its use
    hoping that they can ride apple's coat tails and make higher profits.

    fortunately for me USB 3 dropped in price dramatically since inception..
    I can buy a 2 port host controller for 20$ and a SATA 2 controller for 15$ (and falling)
    if "thunderbolt" can carry these numbers, Ill be all aboard and be waiting.
    Reply
  • (ppshopping) - Wednesday, March 02, 2011 - link

    welcome Reply
  • jb510 - Saturday, March 05, 2011 - link

    I understand the beauty of this solution to be that manufacturers can essentially take any existing PCIe card out of desktop (a USB3 PCIe card for example), stick a Thunder Bolt chip on it (PCIe to TB bridge) and TB connector on it and boom... you have an external USB 3 hub.. or external whatever hub you want. Now it might be even simplier to bypass USB3 and just go straight from SATA to TB, but my point is creating a external hub for any connection that already exists in PCIe card format should be nearly trivial, no?

    I'm not entirely clear however on the evolution of LightPeak into Thunder Bolt. Was LightPeak always running over PCIe, or is that something entirely new?
    Reply
  • lili53 - Thursday, March 10, 2011 - link

    welcome Reply
  • lili94 - Wednesday, March 23, 2011 - link

    welcome Reply
  • huran - Sunday, April 03, 2011 - link

    Dear customers, thank you for your support of our company.
    Here, there's good news to tell you: The company recently
    launched a number of new fashion items! ! Fashionable
    and welcome everyone to come buy. If necessary, please
    input :====www.2kuu.com====
    Reply

Log in

Don't have an account? Sign up now