The Zino 410 HD HTPC is primarily built out of notebook components, and it is not possible for the average enthusiast to build such a system with off-the-shelf components. The only non-notebook component in the whole system was the hard disk, which we will note further down in this section.

Motherboard & Chipset : mini-ITX AMD M880G + SB820 Southbridge

The motherboard used in the Zino 410 HD HTPC is based on AMD's mainstream Danube notebook platform. The M880G chipset has the option of an integrated 4250 GPU, which is not used in our system. It provides support for upto 6 SATA ports, two of which are used internally by the Blu-Ray drive and the hard disk, while two make an appearance in the form of eSATA. The SPDIF and analog audio output are driven by the Realtek ALC662 audio codec chip.

The mini PCI-E slot is taken up by the Dell WLAN 1520 802.11n card which is capable of 300 Mbps. The two antennae from the card are wired in such a way as to come in between the top lid and the intermediate panel separating it from the rest of the computer.

The underside of the motherboard has a MXM graphics slot and another DIMM slot in addition to the one available on the top side.

CPU : AMD Phenom II X4 P940 @ 1.70 GHz

Compared to the ASRock Core 100 and Vision 3D which went in with 35W TDP processors, the Zino 410 HD HTPC comes with a 25W TDP AMD Phenom II X4 P940. This TDP is a result of the low clock rate (1.7 GHz) at which the processor runs. Manufactured in a 45nm process, the processor has 4 cores running a total of 4 threads. Though the processor has 512 KB of L1 cache and 2M of L2 cache, there is no L3 cache unlike the Phenom desktop processors.

GPU : ATI Mobility 5450 MXM

The only discrete GPU option in the Zino 410 series is the Mobility 5450. The MXM module is mounted on the underside of the motherboard. It is the 40 nm Park Pro GPU clocked at 675 MHz, and has 1 GB of DDR3 memory.

With a rated power consumption of 11 W, it doesn't require a complicated cooling solution like what the GT425M warranted in the ASRock Vision 3D.

DRAM : Samsung's 1 x 4GB DDR3 SO-DIMM @ 1333 MHz + Hynix's 1 x 2GB DDR3 SO-DIMM @ 1333 MHz

The Zino 410 ships with more RAM than necessary for HTPC purposes right now. We have two RAM sticking slots. The one on the top side of the motherboard was populated with Samsung's K4B2G0846C DRAM chips. On the underside, we have 2GB of Hynix's HMT325S6BFR8C DRAM chips running with the same specifications as the Samsung chips.

Hard Disk : Western Digital Caviar Black 750GB 7200 rpm 3.5"

We were quite surprised to find a 3.5" hard drive inside the unit. Considering that the rest of the components are from notebook platforms, a 2.5" hard drive would have made much more sense.

The Caviar Black 7200rpm is a well reviewed hard drive and provides more than acceptable performance for a HTPC. However, its power consumption profile only makes the thermal design (about which we will talk in the next section) more challenging.

Optical Disk Drive : Htachi-LG Blu-Ray / DVD RW Tray Loading Drive

The Zino 410 ships with the Hitachi-LG CT10N Blu-Ray / DVD RW tray loading drive.

A slot loading drive would have made the unit appear better, but that is a minor quibble which doesn't affect the functionality of the system.

Keyboard / Mouse / Remote

The Zino 410 also comes with a wireless keyboard and mouse (other options are also available) and a MCE remote. Batteries are also included.

The remote is exactly the same as the one which ships with the ASRock Vision 3D, only a different colour. The wireless keyboard / mouse combo adds $75 to the cost right now. Compared to some of the deals which keep going on for these wireless accessories, I would strongly recommend purchasing them separately. Quality of the wireless keyboard / mouse is no great shakes, and it just gets the job done. On a HTPC where you might not spend much time typing, it is good enough.

The cost of the review unit, when configured with the same components on Feb 17, 2011 was $775 + taxes. At this price, it is smack in the middle between the ASRock Core 100 and ASRock Vision 3D, the other SFF HTPCs in this segment. In the next few sections, we will check out how the Zino 410 fares in our tests.

Unboxing Impressions Zino 410's Thermal Design
Comments Locked

69 Comments

View All Comments

  • funtasticguy - Saturday, February 19, 2011 - link

    Great and thorough review as always. I just purchased one of the these just yesterday when I noticed their new upgraded chips (P960 & P360). Anyway, does anyone know how easy is it to upgrade the hard drive?
  • ganeshts - Sunday, February 20, 2011 - link

    Hard drive upgrading should be pretty straightforward. Just make sure the drive you put in doesn't dissipate more than 8.4 W under full load (just to ensure you don't run into issues with overheating of the unit)
  • tkpmep - Saturday, February 19, 2011 - link

    I bought a Zino 410 a few months ago that was configured almost exactly the same way as is the review unit, and found that it came without an IR receiver for a Windows Media Center Remote. It appears that you have to purchase Dell's own Media Center remote when ordering the unit in order for them to install the IR receiver. I now have to use a USB receiver to control WMC. This is disappointing. Also, the USB receiver for the wireless keyboard works a lot better when plugged into a port in front of the unit than into the rear. Apart from this, its a very nice machine.
  • pirspilane - Sunday, February 20, 2011 - link

    just get a USB extension cable from monoprice.com
  • softdrinkviking - Sunday, February 20, 2011 - link

    It seems a little funny at the top of the unboxing page.

    The paragraph that starts... Of all the SFF HTPCs I have seen, the Dell Zino 410 HD HTPC has the best industrial design....
    seems like it should be the first paragraph.

    because as it is now, the first paragraph ends with... Apart from the main Zino 410 unit, the package also contains:

    but then it starts another paragraph.

    seems like they got reversed.
  • hvakrg - Sunday, February 20, 2011 - link

    Ok, so one could buy this and then upgrade the graphics by purchasing a new graphics card on ebay?

    http://cgi.ebay.com/ATI-Mobility-Radeon-HD-5650-DD...
  • ganeshts - Monday, February 21, 2011 - link

    Need to handle the TDP properly. I think the 5650 is rated for 15-19W, while the 5450 is 11W max. If you don't game at all, it should be pretty OK to get past the video decoder limitations.
  • leftyleno - Sunday, February 20, 2011 - link

    $90 SilverStone Aluminum/Steel Micro ATX HTPC Computer Case GD05B
    $80 AMD Athlon II X3 450 Rana 3.2GHz
    $88 Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
    $60 SAMSUNG Black Blu-ray Drive SATA Model SH-B123L LightScribe Support
    $50 4 gig g skill ram
    $55 Microsoft Wireless Comfort Desktop 5000 Keyboard and Mouse Set - Black
    $80 Radeon hd 5670
    $54 SeaSonic S12II 380B 380W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
    $100 ASUS M4A88TD-M/ USB3 SATA 3 Micro ATX AMD Motherboard
    $100 Windows
    $20 Intel 622AN.HMWWB Mini PCI Express 6200 Centrino Advanced-N Wireless Adapter

    =$ 780

    Beat that Dell!
  • GeorgeH - Sunday, February 20, 2011 - link

    SilverStone GD05B Dimensions:
    5.91"x17.32"x12.79", 1300 cubic inches
    Del Zino 410 Dimensions:
    3.4"x7.8"x7.8", 200 cubic inches

    The Dell is well over six times smaller.

    Radeon 5670 Power Consumption ~ 60W
    Zino 410 Power Consumption ~ ~60W

    The entire Dell system consumes as much power as one component.

    Not only did Dell already "beat that", they did so by a very large margin.
  • geok1ng - Sunday, February 20, 2011 - link

    "$80 AMD Athlon II X3 450 Rana 3.2GHz"

    If you wanna do this, do it the right way; use an e series CPU from AMD for better thermals, or simply go the i3 way.

    "$54 SeaSonic S12II 380B 380W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply"

    That is A LOT of unused power, simply go the picoPSU way. Better thermals and small form factory. A well built sistem would use a notebook power brick to save space and move heat generation away from the SFF case.

    "$100 ASUS M4A88TD-M/ USB3 SATA 3 Micro ATX AMD Motherboard""

    With AMD integrated graphics, i would rather use a custom cooling solution and overclock the hell out of the IGP. 900Mhz core is not an impossible goal for 785G and better IGPs. AND there are smaller ITX MOBOs for this plataform.

Log in

Don't have an account? Sign up now