Introducing the SilverStone GD04

My media center PC was far from old and decrepit, but I wound up with an opportunity to both rebuild it into something faster and cut a profit this month and went for it. Choosing a case for the new build was a difficult decision; the old CoolerMaster Elite 360 case I used still ranks among my favorites for budget machines, but the lack of any kind of vibration-dampening optical drive mounting resulted in my blu-ray/HD-DVD drive progressively producing more and more noise. I decided to go for something sexier, something more suited to being an HTPC case, and after doing a fair bit of research I picked up the SilverStone GD04.

The GD04 is remarkably attractive if you're into that minimalist look (I am); there's a sister GD05 model that has a full 5.25" drive bay instead of just an opening for the optical drive tray, but rather than have unsightly electrical tape covering up the activity LED on the drive I opted to bury it in the case with the GD04. Otherwise the two models are functionally identical, so a lot of what's said in this review will likely apply to the GD05. This case has also been around for a couple years but doesn't seem to have been refreshed by SilverStone; if it ain't broke, don't fix it, right?

SilverStone GD04 Specifications
Motherboard Form Factor Micro ATX, Mini ITX
Drive Bays External 1x 5.25” (partially covered by bezel)
Internal 2x 3.5” or 2.5"
Cooling Front -
Rear -
Top -
Side 1x 120mm intake (left), 2x 120mm intake (right)
Bottom -
Expansion Slots 5 (4 main, 1 accessory)
Front I/O Port 2x USB 2.0, 1x Headphone, 1x Mic
Power Supply Size Standard ATX
Weight 12.21 lbs.
Dimensions 5.91” x 17.32” x 12.72”
In and Around the GD04
POST A COMMENT

68 Comments

View All Comments

  • cweinheimer - Tuesday, December 28, 2010 - link

    Wow, really? I expect flame wars between competitors for attention, but for the writer to flame his readers? That certainly cant go on forever if you expect to keep readers. Oh, wait I see what you are doing, creating controversy so people will tune in. Definitely lame. Reply
  • SlyNine - Sunday, December 26, 2010 - link

    They are obviously Anandtech, Your half cocked ways of pointing out weasel words and fallacies, While completely ignoring the context are baffling to me.

    You whip the noise floor so you can compare other unites to each other without any interference from out side sources, after all you're going to choose on based on how it performs vs. other units. Why do you want other metrics in there( Keep this in context now, you have a lousy track record) ?The noise floor should be considered in YOUR place/theatre. How will including theirs help you decide what unit is the best?
    Reply
  • RobertR13 - Sunday, December 26, 2010 - link

    I genuinely struggled to understand your question, so please let me know if I missed it all together. I understand this is anandtech, however there haven't been other case reviews here for almost 2 years, and done by another person entirely, so I was attempting to establish that these results were not comparable to anything else, which makes them of little to no value.

    Also, I brought up the noise floor issue, as well as the issue of the other components in the case, because without knowing these values, we don't actually know how much noise the case and fans actually generated. For all we know, the GPU fan could have been responsible for almost all of the sound measured, or the 36db measured at the side of the case could have been coming from his girlfriends blow drier in the next room. You see where I'm coming from?
    Reply
  • MeanBruce - Sunday, December 26, 2010 - link

    Robert is right dudes, if you are gonna compare, you first have to standardize! Reply
  • ZRohlfs - Wednesday, December 29, 2010 - link

    There are a differences among the term deciBell. There are several measuring standards among the units. Two of the most synonymous are dBA and dBB. It is all how the different frequencies are factored into the measurement with typical emphasis on the mid level frequencies and a reduced empahsis on the upper and low range frequencies.

    still as long as we are comparing dBA to dBA results yes they are the same but really the best thing is to have the individual frequency ranges and representative sound pressure.

    Just a thought.
    Reply
  • Arneh - Saturday, December 25, 2010 - link

    Great review. I'm personally a big fan of the SilverStone GD02. It's also an mATX case but you can squeeze in 3x3.5" (2 of them with vibration dampening), 1x5.25" ODD and an SSD above the ODD if you really wanted to (this isn't part of the specs but there's a gap in the tray above the ODD that allows you to squeeze in a 2.5" drive). The design is also more aesthetic in my opinion and suited for an HTPC. The two 80mm fans are also extremely quiet. Reply
  • mingus - Saturday, December 25, 2010 - link

    I use this case and replaced the loud fans with what I thought would be quiet ones (800rpm Scythe), and it was still very audible. Tonight i unplugged all the case fans and it's doable, can hear very slightly from the sofa. I was very careful to select all quiet parts on this also.

    May not be right long term, will keep an eye on temps. most likely will rebuild the whole thing. Looking for case ideas, maybe gd02 who knows..
    Reply
  • Belard - Saturday, December 25, 2010 - link

    Okay, its a $100 case - so Silverstone included cheap fans.

    They should have done what others do, include a fan-controller that allows the user to choose how fast his fans run. With 3 HUGE 120mm fans, they simply don't need to run that fast - especially with todays cooler running CPUs.

    There are low-cost solutions to fix this case.

    1 - Buy an aftermarket fan controller ($10~30)
    2 - Buy Antec Fans ($15~19 each) which include a 3-way switch (L / M / H).

    My Antec P150 case has a single 120mm fan that runs on Medium - very little noise for a quad-core desktop system. For a HTPC... it should be even more quiet than what I have.
    Reply
  • micksh - Saturday, December 25, 2010 - link

    What is Extech SL10 sound meter? Can't find it in google. What is the minimum dBA level it can measure?
    At what distance from HTPC did you measure noise? Or, you think it's not important to write about? Like noise is at the same level regardless of how far you are from the source of noise?

    If the noise is 36 dBA at 1 meter from HTPC it is ridiculously loud already. It should be around 20 dBA or less in order to comfortably watch movies.

    Where is the analysis on what components contribute more noise? Was that case fans, CPU cooler or video card? How are we judging HTPC case without such analysis?

    "These aren't loud components to begin with"

    I'm sure they are.

    1. I don't think EVGA was ever known for making quiet video cards. Get MSI Cyclone version and use MSI Afterburner to slow down fans. Edit BIOS if fan is too loud at minimum speed. Read ht4u.net reviews to find quiet video card.

    2. What is PC Power & Cooling? How is that supposed to be quiet? Get Enermax Modu/Pro or Seasonic X or Nexus or some comparable PSU in terms of noise.

    3. Get SSD for main drive and use quiet laptop 5400 rpm HDD in enclosure as a media drive. Mounted with ribbon washers, of course. Scythe SQD2.5-1000 is back on sale in US.

    4. Replace case fans. Scythe Slipstreams, few Zalman resistors and you don't need to care about motherboard or fan controller. Even Antec provides horrible fans with their P desktop line targeted to quiet PC enthusiasts.

    5. It may be to difficult to quietly cool 95W AMD quad core. Get lower powered CPU. And better CPU cooler maybe.

    6. Read silentpcreview.com about basics of quiet PCs.

    These 6 items will drive you closer to quiet HTPC. HTPC case itself can't protect your ears from loud components.
    Reply
  • Belard - Saturday, December 25, 2010 - link

    My P150 case is over 2 years old - it about 2-3 feet from me I can barely hear it (air noise)... barely a rumble from the drive & fan.

    (1) MSI, Gigabyte and H.I.S. make some pretty quiet video cards. I've seen a 6850 being used in normal desktop mode and it was fairly silent. I can't hear my *OLD* 4670 HIS card with its extra large dual-slot cooler.

    (2) PC Power & Cooling is one of the BEST PSU companies in the world. But they don't usually make the quietest ones. Corsair or Seasonic PSUs would be a better choice IMHO.... you can't hear them.

    (3) Yes... on the SSD (if possible). But 2.5" drives are not as reliable as a 3.5" drive. I have a Seagate 1TB 7200 RPM drive... I just put my head by my case - closest to the HD, I can't hear it... but more air noise. :)

    (4) Agreed... many options. So much that Silver Stone should *USE* better fans or include a list of fans to use, rather than waste someone's time with useless fans.

    (5) AMD stock CPU coolers generally do a fine job. 95w is typical for their performance CPUs, X3 & X4s. They do have some 45w X2~X4 CPUs which costs 20~40% more. And of course, theres after market coolers. Overall, the AMD coolers I've used in the past 4 years have been pretty good.
    Reply

Log in

Don't have an account? Sign up now