Hardware Impressions and Specs

If there's one thing I've learned doing display reviews, it's that the 30-inch segment represents (as it should) the best of the best. Entries here have the most input options, features, best panels, and the highest resolution you can get for the money. It's a breath of fresh air to play with a real 16:10, 2560x1600 display after toying with 1080P monotony for so long. If the displays industry worked anything like the CPU industry, we'd have 300 PPI displays with no response lag, infinite contrast, and all for way less than we're paying now. If there was a new year's resolution display manufacturers should make, it's that they stop making 1080P panels in 2011. 

Anyhow, today we're talking about the Dell U3011. I got the chance to review HP's 30 inch monitor, the ZR30w, back when it launched, and will use it as a mental comparison. The Dell U3011 is a refresh of the Dell U3008WFP, and brings a 10-bit per color panel with 12-bit internal processing, more input options, factory calibration (more on that later), and is supposedly 1 ms faster in the response time department. 

The specs for Dell's new 30 inch display are in the table below:

Dell UltraSharp U3011
Video Inputs 2xHDMI, 2xDVI-D w/HDCP, 1xDisplayPort, VGA (D-SUB), Component
Audio Output 3x3.5mm audio jacks (5.1 audio out supported)
Panel Type H-IPS with CCFL Backlight (Panel: PH5NY07U076L)
Pixel Pitch 0.2505 mm
Colors 1.07 billion (30 BPP color - 12 BPC internal processing)
Brightness 370 nits (typical)
Contrast Ratio 1,000:1, or 100,000:1 (dynamic)
Response Time 7 ms (GTG), 17 ms (GTX max)
Viewable Size 30" (756.23 mm)
Resolution 2560 x 1600 at 60 Hz
Viewing Angle 178 degrees horizontal and vertical
Power Consumption (operation) 250 watts (max), 110 watts (typical)
Power Consumption (standby) 2 watts standby, 1 watt off
Screen Treatment Matte/Anti-Glare, Hard Coating
Height-Adjustable Yes: 3.55 inches travel
Tilt Yes: 10 degrees - 20 degrees 
Pivot No
Swivel Yes
VESA Wall Mounting Yes: 100 mm x 100 mm
Dimensions w/ Base (WxHxD) 27.34" (694.5 mm) x 22.5" (571.3 mm) x 8.32" (211.3 mm)
Weight 27.72 lbs (12.6 kg) with stand, 20.40 lbs (9.3 kg) without stand
Additional Features Integrated USB 2.0 hub with 4 USB ports, 7 in 1 media reader, 5.1 audio pass through, factory calibration
Limited Warranty 3 years - repair or replacement
Accessories Power, DVI, DisplayPort, VGA cables. Factory Calibration Report.
Price U3011: $1349.00 

So first up is the display itself. Aesthetically it's almost exactly what you'd expect from Dell in a monitor, and follows their relatively consistent industrial design quite well. The display bezel is entirely black plastic just like we've seen with almost every other Dell, and there's a huge square black stand. 

 

The U3011 has a silver-colored strip that runs around the outside of the display, much like the ZR30w has. However, unlike HP's metal strip, Dell's is plastic. The display bezel on the U3011 is just under 1 cm thinner at the edge than HP's, though both get much thicker at the center. 

The stand the U3011 comes with is decently sturdy, providing tilt, rotation and height adjustment, but no pivot. Height on the U3011 can adjust from about 3 cm to 12 cm from the top of the plastic stand to the bottom of the bezel. Dell advertises 10 cm of travel - I can definitely see that much travel, which is definitely welcome. The other added bonus is that HDMI, DVI, and DisplayPort cables don't crash into the plastic base and bend worrisomely even with the display at its lowest height adjustment setting. I wish the U3011 went up a bit higher, because it seems like I inevitably use the highest adjustment point whenever I'm connecting cables, but too lazy to rotate the whole monitor. It's just shy of being tall enough where I can squeeze my head underneath - oh c'mon, everyone does that, right?

  

There's also about 30 degrees of tilt in the up direction, and about 5 degrees downwards. 

  

Rotation on the base is about +/- 30 degrees, which is more than sufficient. Thankfully, the base on the U3011 is nice and smooth through the rotation, with no annoying backlash or chatter which generally makes entire displays and desks shudder. 

  

Dell has placed the 7 in 1 card reader (xD/SD/MS/MMC) on the left side of the U3011. Down below it are two of the four USB 2.0 ports connected to the U3011's internal hub.

The lower one has a power symbol which indicates that it's capable of supplying more current - 1.5 amps of it to be exact, for 7.5 watts of charging power. Though that should be more than sufficient to charge an iPad, connecting one resulted in the same "Not Charging" behavior one would see from a normal 500 mA port. It's unclear to me whether the USB charging specification is being implemented correctly on the display or not. Other devices charge fine, but likewise do so on normal 500 mA ports. In addition, the USB ports only provide power when the upstream USB-B port is connected - you can't use the ports to just charge devices without connecting the hub to something. I tested a 32 GB SD card in the reader, which worked just fine as well.

The backside of the U3011 is nothing new or special if you've seen Dell's other recent display designs. It's just scaled up to be larger, and looks the same. Personally, I find it classy and applaud the consistency, even if the Dell logo up top is positively gigantic (but then again, everyone does that). The stand has a cable routing port, but lacks positioning clips or guides like I've seen on other displays. 

Finally, the I/O ports on the U3011 are where they should be at the base of the display, but high enough up that we don't run into cable routing issues. The U3011 also has a nice sticker facing outwards with all the ports positioned appropriately - something super useful when connecting things up from a weird contorted angle. The U3011 provides a ton of input options - two DVI-D ports, two HDMI 1.3a ports with Deep Color support, D-SUB for VGA, DisplayPort, and component video in. Moving along are the two remaining USB 2.0 downstream ports, USB-B upstream port, and lastly three 3.5mm audio out jacks for doing 5.1 audio pass through from HDMI. Oh, there's also a DC power jack in case you're using the Dell speaker bar with the U3011 which is an added accessory - we didn't get a chance to try that. I'd say the input options on the U3011 are impressive overall, just like we expect from a 30-inch display. 

If you use your own VESA mounts with displays, the U3011 will work as long as you get one beefy enough for it. The weird part about the U3011's mounting arm is that it connects to the 100 mm VESA mount on the backside of the display with 4 T-10 Torx screws. That just seems like an obtuse choice for something which should be easily user-accessible. It's a small nit to pick, but this choice just really puzzles me since I doubt average users have all the Torx bits sitting around. 

The U3011 is supposed to come calibrated from the factory, accompanied by a calibration report showing Delta-E tracking averaging below 5.0. Our U3011 came with no such report, and as we'll show later also didn't perform very well out of box in our color tracking validation test. We later learned that this is because our U3011 is a pre-production sample which is identical to the shipping model, just without factory calibration. In addition our panel was the A00 revision. 

Last but not least is packaging. The U3011 packaging is generic and doesn't draw attention - there's Dell written on it, and U3011 on the corner. It's like the other Dell packaging I've seen before. What I found interesting is that the U3011 comes fully assembled and in one piece inside the box. The mounting arm is preattached, and two styrofoam pieces at top and bottom which hold it securely. The U3011 packaging is actually far smaller than HP's for the ZR30w.

More shots of the U3011 in our gallery below:

OSD Controls, Menus, and Audio Out
POST A COMMENT

123 Comments

View All Comments

  • Sabresiberian - Friday, January 14, 2011 - link

    Indeed! Thar's the thing I most want at this point; I hope manufacturers are reading your articles! Samsung? LG? Anyone listening?

    ;)
    Reply
  • mapesdhs - Friday, January 14, 2011 - link


    Can this new Dell display accept a sync-on-green signal? How well does it handle lower
    resolution inputs such as 1920x1200 or 1600x1200?

    Such large displays don't seem to be quite there yet wrt quality and sensible pricing, so I
    went with a 24" HP LP2475W (HIPS version).

    Ian.
    Reply
  • flblws - Friday, January 14, 2011 - link

    how much? $1300? and still has a VGA port? REALLY?

    AND

    and no 120HZ or 240HZ ?

    Really?

    yawn....
    Reply
  • cjl - Saturday, January 15, 2011 - link

    No monitor with this res will have 120Hz (or higher) anytime soon - the bandwidth just isn't there over DVI, HDMI, or DisplayPort (though the latest DisplayPort might just about be good enough - I'm not completely positive). As for the VGA port, some people still have laptops with only a VGA output. Obviously, it isn't meant to be the primary input, but it is there as an option (among the enormous number of other inputs). Reply
  • DanNeely - Saturday, January 15, 2011 - link

    VGA is there because it costs next to nothing to add, but you can forget running native resolution over it. I tried once by accident (my GPU decided to send analog video over a DVI-I cable) to my NEC 3090, and the result was a ghastly mess. My initial reaction was to wonder if my monitor was DOA. Reply
  • AnnonymousCoward - Saturday, January 15, 2011 - link

    DP1.2 x4 has the bandwidth for 2560x1600, 30-bit, 120Hz. All techs have the bandwidth for 120Hz at lower res. Reply
  • Soldier1969 - Saturday, January 15, 2011 - link

    Well you keep on yawning my poor friend ill keep playing with maximum eye candy at 1600p. I have a 55 inch LED Sony 240hertz for everything else and a second 120hertz 37inch Samsung panel next to my 30 incher for double duty. Meanwhile you keep playing on your puny panel. You need to get educated on the tech or just keep showing your ignorance. You get what you pay for. If you want to play at the best res there is for PCs then get one otherwise just keep playing with TN panel garbage that keeps being churned out for the poor folk that think its good as it gets. Reply
  • Luay - Saturday, January 15, 2011 - link

    Everyone is comparing the HP to the Dell but has anyone heard of Hazro?

    I'm sure a little attention to this company and its products will encourage them to venture into other markets. review please!

    https://www.hazro.co.uk/shop.html#ecwid:category=4...
    Reply
  • MeanBruce - Saturday, January 15, 2011 - link

    With do many tech groups claiming to be delivering exactly what their customers were asking for let's hope someone from Dell Monitor Design reads Anandtech or at least these many comments. Everyone seems to be in agreement on the lack of RBG LED and DisplayPort 1.4 for this flagship design. There is hope though, Dell is due to replace the U2410 this year with the U2412, and in the past has introduced it's latest developments on the 24in platform then later they appear on the 27 and 30. So let's hope the new 24inch Ultrasharp is everything we have come to expect from Dell panels, and hey throw in a remote to control all inputs and the OSD and volume on the Soundbar. For all that I would have no problem with a $699 or $799 pricetag, they already make three other 24inch monitors at very low price points. Give the rest of us what we want! Reply
  • MeanBruce - Saturday, January 15, 2011 - link

    Even $899, if it's Drop Dead Gorgeous!

    Peace Brothers!
    Reply

Log in

Don't have an account? Sign up now