There are only a handful of metrics by which 2009 didn’t end as a successful year for AMD. With the launch of the Radeon HD 5800 series in September of that year AMD got a significant and unusually long-standing jump on the competition. By being the first company to transition a high-end GPU to TSMC’s 40nm process they were able to bring about the next generation of faster and cheaper video cards, quickly delivering better performance at better prices than their 55nm predecessors and competitors alike. At the same time they were the first company to produce a GPU for the new DirectX 11 standard, giving them access to a number of new features, a degree of future proofness, and good will with developers eager to get their hands on DX11 hardware.

Ultimately AMD held the high-end market for over 6 months until NVIDIA was able to counter back with the Fermi based GTX 400 series. Though it’s not unprecedented for a company to rule the high-end market for many months at a time, it’s normally in the face of slower but similar cards from the competition – to stand alone is far more rare. This is not to say that it was easy for AMD, as TSMC’s 40nm production woes kept AMD from fully capitalizing on their advantages until 2010. But even with 40nm GPUs in short supply, it was clearly a good year for AMD.

Now in the twilight of the year 2010, the landscape has once again shifted. NVIDIA did deliver the GTX 400 series, and then they delivered the GTX 500 series, once more displacing AMD from the high-end market as NVIDIA’s build’em big strategy is apt to do. In October we saw AMD reassert themselves in the mid-range market with the Radeon HD 6800 series, delivering performance close to the 5800 series for lower prices and at a greater power efficiency, and provoking a price war that quickly lead to NVIDIA dropping GTX 460 prices. With the delivery of the 6800 series, the stage has been set for AMD’s return to the high-end market with the launch of the Radeon HD 6900 series.

Launching today are the Radeon HD 6970 and Radeon HD 6950, utilizing AMD’s new Cayman GPU. Born from the ashes of TSMC’s canceled 32nm node, Cayman is the biggest change to AMD’s GPU microarchitecture since the original Radeon HD 2900. Just because AMD doesn’t have a new node to work with this year doesn’t mean they haven’t been hard at work, and as we’ll see Cayman and the 6900 series will brings that hard work to the table. So without further ado, let’s dive in to the Radeon HD 6900 series.

  AMD Radeon HD 6970 AMD Radeon HD 6950 AMD Radeon HD 6870 AMD Radeon HD 6850 AMD Radeon HD 5870
Stream Processors 1536 1408 1120 960 1600
Texture Units 96 88 56 48 80
ROPs 32 32 32 32 32
Core Clock 880MHz 800MHz 900MHz 775MHz 850MHz
Memory Clock 1.375GHz (5.5GHz effective) GDDR5 1.25GHz (5.0GHz effective) GDDR5 1.05GHz (4.2GHz effective) GDDR5 1GHz (4GHz effective) GDDR5 1.2GHz (4.8GHz effective) GDDR5
Memory Bus Width 256-bit 256-bit 256-bit 256-bit 256-bit
Frame Buffer 2GB 2GB 1GB 1GB 1GB
FP64 1/4 1/4 N/A N/A 1/5
Transistor Count 2.64B 2.64B 1.7B 1.7B 2.15B
Manufacturing Process TSMC 40nm TSMC 40nm TSMC 40nm TSMC 40nm TSMC 40nm
Price Point $369 $299 $239 $179 ~$249

Following AMD’s unfortunate renaming of its product stack with the Radeon HD 6800 series, the Radeon HD 6900 series is thus far a 3 part, 2 chip lineup. Today we are looking at the Cayman based 6970 and 6950, composing the top of AMD’s single-GPU product line. Above that is Antilles, the codename for AMD’s dual-Cayman Radeon HD 6990. Originally scheduled to launch late this year, the roughly month-long delay of Cayman has pushed that back; we’ll now be seeing the 3rd member of the 6900 series next year. So today the story is all about Cayman and the single-GPU cards it powers.

At the top we have the Radeon HD 6970, AMD’s top single-GPU part. Featuring a complete Cayman GPU, it has 1536 stream processors, 96 texture units, and 32 ROPs. It is clocked at 880MHz for the core clock and 1375MHz (5.5GHz data rate) for its 2GB of GDDR5 RAM. TDP (or the closest thing to it) is 250W, while reflecting the maturity and AMD’s familiarity with the 40nm process typical idle power draw is down from the 5800 series to 20W.

Below that we have the Radeon HD 6950, the traditional lower power card using a slightly cut-down GPU. The 6950 has 1408 stream processors, 88 texture units, and still all 32 ROPs attached to the same 2GB of GDDR5. The core clock is similarly reduced to 800MHz, while the memory clock is 1250MHz (5GHz data rate). TDP is 200W, while idle power is the same as with the 6970 at 20W.

From the specifications alone it’s quickly apparent that something new is happening with Cayman, as at 1536 SPs it has fewer SPs than the 1600 SP Cypress/5870 it replaces. We have a great deal to talk about here, but we’ll stick to a high-level overview for our introduction. In the biggest change to AMD’s core GPU architecture since the launch of their first DX10/unified shader Radeon HD 2900 in 2007, AMD is moving away from the Very Long Instruction Word-5 (VLIW5) architecture we have come to know them for, in favor of a slightly less wide VLIW4 architecture. In a nutshell AMD’s SIMDs are narrower but there are more of them, as AMD looks to find a new balance in their core architecture. Although it’s not a new core architecture outright, the change from VLIW5 to VLIW4 brings a number of ramifications that we will be looking at. And this is just one of the many facets of AMD’s new architecture.

Getting right to the matter of performance, the 6970 performs very close to the GTX 570/480 on average, while the 6950 is in a class of its own, occupying the small hole between the 5870/470 and the 6970/570. With that level of performance the pricing for today’s launch is rather straightforward: the 6970 will be launching slightly above the 570 at $379, while the 6950 will be launching at the $299 sweet spot. Further down the line AMD’s partners will be launching 1GB versions of these cards, which will be bringing prices down as a tradeoff for potential memory bottlenecks.

Today’s launch is going to be hard launch, with both the 6970 and the 6950 available. AMD is being slightly more cryptic than usual about just what the launch quantities are; our official guidance is “available in quantity” and “tens of thousands” of cards. On the one hand we aren’t expecting anything nearly as constrained as the 5800 series launch, and at the same time AMD is not filling us with confidence that it will be widely available like the 6800 either. If at the end of this article you decide you want a 6900 card, your best bet is to grab one sooner than later.


AMD's Current Product Stack

With the launch of the 6900 series, the 5800 series is facing its imminent retirement. There are still a number of cards on the market and they’re priced to move, but AMD is looking at cleaning out its Cypress inventory over the next couple of months, so officially the 5800 series is no longer part of AMD’s current product stack. Meanwhile AMD’s dual-GPU 5970 remains an outlier, as its job is not quite done until the 6990 arrives – until then it’s still officially AMD’s highest-end card and their closest competitor to the GTX 580.

Meanwhile NVIDIA’s product stack and pricing stands as-is.

Winter 2010 Video Card MSRPs
NVIDIA Price AMD
$500  
  $470 Radeon HD 5970
$410  
  $369 Radeon HD 6970
$350  
  $299 Radeon HD 6950
 
$250 Radeon HD 5870
$240 Radeon HD 6870
$180-$190 Radeon HD 6850
Refresher: The 6800 Series’ New Features
Comments Locked

168 Comments

View All Comments

  • Remon - Wednesday, December 15, 2010 - link

    Seriously, are you using 10.10? It's not like the 10.11 have been out for a while. Oh, wait...

    They've been out for almost a month now. I'm not expecting you to use the 10.12, as these were released just 2 days ago, but you can't have an excuse about not using a month old drivers. Testing overclocked Nvidia cards against newly released cards, and now using older drivers. This site get's more biased with each release.
  • cyrusfox - Wednesday, December 15, 2010 - link

    I could be wrong, but 10.11 didn't work with the 6800 series, so I would imagine 10.11 wasn't meant for the 6900 either. If that is the case, it makes total sense why they used 10.10(cause it was the most updated driver available when they reviewed.)

    I am still using 10.10e, thinking about updating to 10.12, but why bother, things are working great at the moment. I'll probably wait for 11. or 11.2.
  • Remon - Wednesday, December 15, 2010 - link

    Nevermind, that's what you get when you read reviews early in the morning. The 10.10e was for the older AMD cards. Still, I can't understand the difference between this review and HardOCP's.
  • flyck - Wednesday, December 15, 2010 - link

    it doesn't. Anand has the same result for 25.. resolutions with max details AA and FSAA.

    Presentation on anand however is more focussed on 16x..10.. resolutions. (last graph) if you look in the first graph you'll notice the 6970/6950 performs like HardOcp. e.g. the higher the quality the smaller the gap becomes between 6950 and 570 and 6970 and 580. the lower the more 580 is running away and 6970/6950 are trailing the 570.
  • Gonemad - Wednesday, December 15, 2010 - link

    Oookay, new card from the red competitor. Welcome aboard.

    But, all of this time, I had to ask: why is Crysis is so punitive on the graphics cards? I mean, it was released eons ago, and still can't be run with everything cranked up in a single card, if you want 60fps...

    Is it sloppy coding? Does the game *really* looks better with all the eye candy? Or they built a "FPS bug" on purpose, some method of coding that was sure to torture any hardware that would be built in the next 18 months after release?

    I will get slammed for this, but for instance, the water effects on Half Life 2 look great even on lower spec cards, once you turn all the eye-candy on, and the FPS doesn't drop that much. The same for some subtle HDR effects.

    I guess I should see this game by myself and shut up about things I don't know. Yes, I enjoy some smooth gaming, but I wouldn't like to wait 2 years after release to run a game smoothly with everything cranked up.

    Another one is Dirt 2, I played it with all the eye candy to the top, my 5870 dropped to 50-ish FPS (as per benchmarks),it could be noticed eventually. I turned one or two things off, checked if they were not missing after another run, and the in game FPS meter jumped to 70. Yay.
  • BrightCandle - Wednesday, December 15, 2010 - link

    Crysis really does have some fabulous graphics. The amount of foliage in the forests is very high. Crysis kills cards because it really does push current hardware.

    I've got Dirt 2 and its not close in the level of detail. Its a decent looking game at times but its not a scratch on Crysis for the amount of stuff on screen. Half life 2 is also not bad looking but it still doesn't have the same amount of detail. The water might look good but its not as good as a PC game can look.

    You should buy Crysis, its £9.99 on steam. Its not a good game IMO but it sure is pretty.
  • fausto412 - Wednesday, December 15, 2010 - link

    yes...it's not much of a fun game but damn it is pretty
  • AnnihilatorX - Wednesday, December 15, 2010 - link

    Well original Crysis did push things too far and optimization could be used. Crysis Warhead is much better optimized while giving pretty identical visuals.
  • fausto412 - Wednesday, December 15, 2010 - link

    "I guess I should see this game by myself and shut up about things I don't know. Yes, I enjoy some smooth gaming, but I wouldn't like to wait 2 years after release to run a game smoothly with everything cranked up."

    that's probably a good idea. Crysis was made with future hardware in mind. It's like a freaking tech demo. Ahead of it's time and beaaaaaautiful. check it out on max settings,...then come back tell us what you think.
  • TimoKyyro - Wednesday, December 15, 2010 - link

    Thank you for the SmallLuxGPU test. That really made me decide to get this card. I make 3D animations with Blender in Ubuntu so the only thing holding me back is the driver support. Do these cards work in Ubuntu? Is it possible for you to test if the Linux drivers work at the time?

Log in

Don't have an account? Sign up now