• What
    is this?
    You've landed on the AMD Portal on AnandTech. This section is sponsored by AMD. It features a collection of all of our independent AMD content, as well as Tweets & News from AMD directly. AMD will also be running a couple of huge giveaways here so check back for those.
    PRESENTED BY

PowerTune, Cont

PowerTune’s functionality is accomplished in a two-step process. The first step is defining the desired TDP of a product. Notably (and unlike NVIDIA) AMD is not using power monitoring hardware here, citing the costs of such chips and the additional design complexities they create. Instead AMD is profiling the performance of their GPUs to determine what the power consumption behavior is for each functional block. This behavior is used to assign a weighted score to each functional block, which in turn is used to establish a rough equation to find the power consumption of the GPU based on each block’s usage.

AMD doesn’t provide the precise equations used, but you can envision it looking something like this:

Power Consumption =( (shaderUsage * shaderWeight) + (ropUsage * ropWeight) + (memoryUsage * memoryWeight) ) * clockspeed

In the case of the Radeon HD 6970, the TDP is 250W, while the default clockspeed is 880MHz.

With a power equation established, AMD can then adjust GPU performance on the fly to keep power consumption under the TDP. This is accomplished by dynamically adjusting just the core clock based on GPU usage a few times a second. So long as power consumption stays under 250W the 6970 stays at 880MHz, and if power consumption exceeds 250W then the core clock will be brought down to keep power usage in check.

It’s worth noting that in practice the core clock and power usage do not have a linear relationship, so PowerTune may have to drop the core clock by quite a bit in order to maintain its power target. The memory clock and even the core voltage remain unchanged (these are only set with PowerPlay states), so PowerTune only has the core clock to work with.

Ultimately PowerTune is going to fundamentally change how we measure and classify AMD’s GPUs. With PowerTune the TDP really is the TDP; as a completely game/application agonistic way of measuring and containing power consumption, it’s simply not possible to exceed the TDP. The power consumption of the average game is still below the TDP – sometimes well below – so there’s still an average case and a worst case scenario to discuss, but the range between them just got much smaller.

Furthermore as a result, real world performance is going to differ from theoretical performance that much more. Just as is the case with CPUs where the performance you get is the performance you get; teraFLOPs, cache bandwidth, and clocks alone won’t tell you everything about the performance of a product. The TDP and whether the card regularly crosses it will factor in to performance, just as how cooling factors in to CPU performance by allowing/prohibiting higher turbo modes. At least for AMD’s GPUs, we’re now going to be talking about how much performance you can get for any given TDP instead of specific clockspeeds, bringing performance per watt to the forefront of importance.

So by now you’re no doubt wondering what the impact of PowerTune is, and the short answer is that there’s virtually no impact. We’ve gone ahead and compiled a list of all the games and applications in our test suite, and whether they triggered PowerTune throttling. Of the dozen tests, only two triggered PowerTune: FurMark as expected, and Metro 2033. Furthermore as you can see there was a significant difference between the average clockspeed of our 6970 in these two situations.

AMD Radeon HD 6970 PowerTune Throttling
Game/Application Throttled?
Crysis: Warhead No
BattleForge No
Metro Yes (850Mhz)
HAWX No
Civilization V No
Bad Company 2 No
STALKER No
DiRT 2 No
Mass Effect 2 No
Wolfenstein No
3DMark Vantage Yes
MediaEspresso 6 No
Unigine Heaven No
FurMark Yes (600MHz)
Distributed.net Client No

In the case of Metro the average clockspeed was 850MHz; Metro spent 95% of the time running at 880MHz, and only at a couple of points did the core clock drop to around 700MHz. Conversely FurMark, a known outlier, drove the average core clock down to 600MHz for a 30% reduction in the core clock. So while PowerTune definitely had an impact on FurMark performance it did almost nothing to Metro, never mind any other game/application. To illustrate the point, here are our Metro numbers with and without PowerTune.

Radeon HD 6970: Metro 2033 Performance
PowerTune 250W PowerTune 300W
2560x1600 25.5 26
1920x1200 39 39.5
1680x1050 64.5 65

The difference is no more than .5fps on average, which may as well be within our experimental error range for this benchmark. For everything we’ve tested on the 6970 and the 6950, the default PowerTune settings do not have a meaningful performance impact on any game or application we test. Thus at this point we’re confident that there are no immediate drawbacks to PowerTune for desktop use.

Ultimately this is a negative feedback mechanism, unlike Turbo which is a positive feedback mechanism. Without overclocking the best a 6970 will run at is 880MHz, whereas Turbo would increase clockspeeds when conditions allow. Neither one is absolutely the right way to do things, but there’s a very different perception when performance is taken away, versus when performance is “added” for free. I absolutely like where this is going – both as a hardware reviewer and as a gamer – but I’d be surprised if this didn’t generate at least some level of controversy.

Finally, while we’ve looked at PowerTune in the scope of desktop usage, we’ve largely ignored other cases so far. AMD will be the first to tell you that PowerTune is more important for mobile use than it is desktop use, and mobile use is all the more important as the balance between desktops and laptops sold continues to slide towards laptops. In the mobile space not only does PowerTune mean that AMD will absolutely hit their TDPs, but it should allow them to produce mobile GPUs that come with higher stock core clocks, comfortable in the knowledge that PowerTune will keep power usage in check for the heaviest games and applications. The real story for PowerTune doesn’t even begin until 2011 – as far as the 6900 series is concerned, this may as well be a sneak peak.

Even then there’s one possible exception we’re waiting to see: 6990 (Antilles). The Radeon HD 5970 put us in an interesting spot: it was and still is the fastest card around, but unless you can take advantage of CrossFire it’s slower than a single 5870, a byproduct of the fact that AMD had to use lower core and memory clocks to make their 300W TDP. This is in stark comparison to the 4870X2, which really was 2 4870s glued together with the same single GPU performance. With PowerTune AMD doesn’t necessarily need to repeat the 5970’s castrated clocks; they could make a 6970X2, and let PowerTune clip performance as necessary to keep it under 300W. If something is being used without CrossFire for example, then there’s no reason not to run the 1 GPU at full speed. It would be the best of both worlds.

In the meantime we’re not done with PowerTune quite yet. PowerTune isn’t just something AMD can set – it’s adjustable in the Overdrive control panel too.

Redefining TDP With PowerTune Tweaking PowerTune
POST A COMMENT

167 Comments

View All Comments

  • fausto412 - Wednesday, December 15, 2010 - link

    6970 just 4 to 6 fps faster in Bad Company 2 than my 5870? WTF!

    not worth the upgrade. what a lame ass successor.
    Reply
  • Kibbles - Wednesday, December 15, 2010 - link

    It's 7% faster at 1920 and 9% faster at 2560. BC2 obviously doesn't need the extra GPU power at 1680.

    I wouldn't call it weak, but this card certainly isn't the clear winner that the 5870 was.
    Reply
  • fausto412 - Wednesday, December 15, 2010 - link

    its weak if i was expecting a response to the gtx580 to upgrade to.

    may as well stay with my 5870.
    Reply
  • ClownPuncher - Wednesday, December 15, 2010 - link

    For now... But who really bases their purchase on one game anymore? It looks like 10.12 or 11.1 drivers will help performance a good amount. Reply
  • fausto412 - Wednesday, December 15, 2010 - link

    I base my performance on 1 game...because it is a very taxing game and my #1 game right now. Reply
  • MeanBruce - Wednesday, December 15, 2010 - link

    Yup, dude I heard the AMD 7000 series might make an early appearance next July, with the die shrink @28nm you might want to wait and pick up a 7970! Reply
  • fausto412 - Wednesday, December 15, 2010 - link

    that's what i'm considering now. need to upgrade for 30% more performance than 5870 for it to make sense. Reply
  • Stuka87 - Wednesday, December 15, 2010 - link

    The game is CPU limited at lower resolutions. BC2 is known for being more CPU bound than GPU bound.

    But I was hoping for a larger jump over the previous cards :/
    Reply
  • fausto412 - Wednesday, December 15, 2010 - link

    I understand BFBC2 is more cpu bound. But in this testing Anandtech did they use a TOP TOP TOP of the line cpu so that rules that out as a bottleneck. Reply
  • Belard - Wednesday, December 15, 2010 - link

    Yeah... at least the model numbers didn't make things confusing!

    In some benchmarks, the 6950 is faster than your 5870... but it would have made far more sense to call these 6850/6870 or even 6830/6850..

    AMD screwed up with the new names...
    Reply

Log in

Don't have an account? Sign up now