We've got a lot of great builds this year--some great options below $1000 and some great ones much higher than that. I wanted to offer something a little different for the mix.

Unfortunately, as Jarred mentioned in the introduction, building a new system today is pretty ill advised. Intel is set to release Sandy Bridge in another two months and with it we'll see a big reset in the components we recommend. Within six or so months of the Sandy Bridge arrival, AMD is expected to release its first new high end server/desktop architecture, codenamed Bulldozer. Thus my ideal build would limit spending on the CPU and motherboard, and move those dollars toward the rest of the components in the system. The idea is that you spend enough on a CPU/motherboard today to get good performance, but minimize the expense to enable upgrading in the not too distant future. You can then take your "old" CPU and motherboard and turn it into an awesome secondary system for a family member or even yourself (hello HTPC!).

Anand's Ready for Bulldozer/Sandy SSD System
Hardware Component Price
Processor AMD Athlon II X3 450 $79
Video ASUS EAH6850 Radeon HD 6850 1GB $200
Motherboard MSI 880GM-E41 $75
Memory G.Skill Ripjaws Series 8GB DDR3-1333 (2x4GB) $125
Solid State Drive Corsair Force F120 128GB SF-1200 SSD $220
Hard Drive 2 x Seagate Barracuda LP 2TB HDDs in RAID-1 $200
Optical Drive Samsung 22X DVDRW $15
Case Corsair Obsidian 800D Full Tower Case $280
Case Alternative Antec P193 $183
Case Alternative #2 Antec Three Hundred $60
Power Supply Antec BP550 Plus 550W $65
Base System Total $1039 - $1259

Below $100, you can't beat AMD on the CPU. Personally I like having more than two cores on a system, which is why I went for the Athlon II X3 450. It gives you a great balance of price/performance without even breaking $80. The MSI 880GM is a good motherboard from an upgrade standpoint. You can always reuse the Athlon II X3 + 880G setup later on as an HTPC as long as you don't mind not having TrueHD/DTS-HD MA bitstreaming support. The rest of the system is well configured, with 8GB of memory that will be re-usable in whatever DDR3 platform you have next year.

People are always asking me what my ideal storage setup would be given my affinity for SSDs these days. The configuration above almost exactly mimics the setup I have at home. I've put a 128GB Corsair Force F120 based on the SandForce SF-1200 controller as the OS drive; you may want to upgrade your SSD in another 12 months or so which is the only reason I'd shy away from the F240. If you can get away with less space, then by all means go for it but I personally like having all of my applications and at least one frequently used game reside on my SSD to maximize the low-latency goodness.

If you don't have a NAS or some form of massive file storage at home, I highly recommend the SSD + two HDDs in RAID-1 approach. I grabbed a pair of 2TB Seagate Barracuda LPs for mass storage, although you could use smaller drives if you don't have a lot to store. These drives would be for other game installs, pictures, movies, music. The RAID-1 is just to protect things in case of a single drive failure, although you still want to have some sort of a backup plan external to your PC.

A good GPU is important if you're going to be gaming at all. I picked the Radeon HD 6850 because it is a good balance of price and performance and sufficient for most of my gaming needs at this point. While personally I'd probably opt for something faster, that's only because I tend to use relatively high resolution displays - no need in penalizing the system because of it.

The case selection is an interesting one. Typically I don't spend much money on a case in my builds, my focus is always on the internal hardware. Gary Key, our old Senior Motherboard Editor likes to view cases as an investment - something that'll last you several builds. I figured I'd give Gary's approach on this build and go overboard with the case. Corsair's Obsidian 800D is super easy to work inside, looks very sleek on the outside and seems like the type of case you could keep around for several builds. If you want to save a bit of money there are always cheaper alternatives from Antec.

Closing out the list is the power supply. We don't need to go overkill on power supply since we're not running a ton of hard drives or have a multi-GPU setup. The 550W Antec works well and is a decent choice to any midrange setup.

The end result is a system that's pretty quick today, and with a motherboard/CPU swap next year you've got a huge improvement in performance as well as leftover hardware to build a decent HTPC in the near future.

Raja's Midrange Overclocking Systems Ryan's High-End Gaming System
Comments Locked

112 Comments

View All Comments

  • Aikouka - Friday, November 19, 2010 - link

    First, a few oddities on Balraj's build...

    Why sacrifice dual-channel support for the possibility of upgrading to 8GB in a budget system?

    Also, the blu-ray drive that was included is OEM and doesn't include blu-ray playback software, which just adds an extra cost (that can be significant depending on the route chosen to attain such software).

    Those Lian-Li cases... really make me wish I would've stayed with Lian-Li on my current build. I would've probably kept my PC-V1100+ (I think that's the right model number), but I noticed the case has an issue where the slide mechanism that holds the side panel on eventually succumbs to reverberation (which is rather annoying). My PC-V2000+ is still going strong though and no reverberation!

    I'm using a Cooler Master case right now, and the only problem is that the side panels are so darned flimsy unlike the Lian-Li cases where the side panels double as lethal weapons. Not to mention how it scratches like crazy!
  • JarredWalton - Friday, November 19, 2010 - link

    I had to switch the Blu-ray drive because I couldn't find Balraj's original choice in stock. Without doing more research, I figured 8X BD-ROM was better than 4X, and then there's a jump of $15-$25 to get to the better quality drives. I'll look around to see if I can find something else though....
  • Aikouka - Friday, November 19, 2010 - link

    Well, I guess my thought was, "why not just stick with a normal DVD burner?" It is a budget build after all :).

    It might just be better to pick up a retail blu-ray drive, since they'll have OEM software (usually isn't as good as the fancier ~$90 software though).
  • JarredWalton - Friday, November 19, 2010 - link

    Okay, I found a decent price on a 10X LG... it's $85 at Newegg, but Microcenter currently has it for $70. As for leaving out the Blu-ray entirely, we mention that option. Think of this more as "Balraj's Budget Intel System" as opposed to "Balraj's Budget Intel System" and you'll get the picture. He personally thinks BD is great, and really his system is almost a budget HTPC more than a strictly budget PC. Cheers!
  • 7Enigma - Friday, November 19, 2010 - link

    Had a very bad experience like many others with the Intel mid-range Gigabyte mobos. They've had MANY issues and the customer support has been non-existent for some of us. You can read my story on Newegg, but there are many with the same complaints about bad hardware and no recourse from the company. I've purchased video cards and mobo's from them in the past but they are off my list for the foreseeable future.

    Ended up having to shell out for a new mobo (Asus) and it has been rocksolid from day 1 with no issues.
  • GeorgeH - Friday, November 19, 2010 - link

    Laptop Guide = :-)
    Desktop Guide = :-)
    Smartphone Guide = :-(
  • JarredWalton - Friday, November 19, 2010 - link

    That's coming... patience, grasshopper. :-)

    You can harass Anand, Brian, and Vivek if you'd like, though... but Anand is probably going to let others do that as he's got plenty keeping him up late at night.
  • therealnickdanger - Friday, November 19, 2010 - link

    The LG Optimus S is going to be $1.00 at Best Buy on Black Friday!
  • GeorgeH - Friday, November 19, 2010 - link

    There is no patience - there is only read... or read not. :-)
  • strikeback03 - Tuesday, November 23, 2010 - link

    Except that patience was pretty much Yoda's biggest problem with Luke...

Log in

Don't have an account? Sign up now