Holiday 2010 System Builder's Guide
by AnandTech Staff, edited by Jarred Walton on November 19, 2010 2:00 AM EST- Posted in
- Guides
- Systems
- Holiday 2010
We've got a lot of great builds this year--some great options below $1000 and some great ones much higher than that. I wanted to offer something a little different for the mix.
Unfortunately, as Jarred mentioned in the introduction, building a new system today is pretty ill advised. Intel is set to release Sandy Bridge in another two months and with it we'll see a big reset in the components we recommend. Within six or so months of the Sandy Bridge arrival, AMD is expected to release its first new high end server/desktop architecture, codenamed Bulldozer. Thus my ideal build would limit spending on the CPU and motherboard, and move those dollars toward the rest of the components in the system. The idea is that you spend enough on a CPU/motherboard today to get good performance, but minimize the expense to enable upgrading in the not too distant future. You can then take your "old" CPU and motherboard and turn it into an awesome secondary system for a family member or even yourself (hello HTPC!).
| Anand's Ready for Bulldozer/Sandy SSD System | ||
| Hardware | Component | Price |
| Processor | AMD Athlon II X3 450 | $79 |
| Video | ASUS EAH6850 Radeon HD 6850 1GB | $200 |
| Motherboard | MSI 880GM-E41 | $75 |
| Memory | G.Skill Ripjaws Series 8GB DDR3-1333 (2x4GB) | $125 |
| Solid State Drive | Corsair Force F120 128GB SF-1200 SSD | $220 |
| Hard Drive | 2 x Seagate Barracuda LP 2TB HDDs in RAID-1 | $200 |
| Optical Drive | Samsung 22X DVDRW | $15 |
| Case | Corsair Obsidian 800D Full Tower Case | $280 |
| Case Alternative | Antec P193 | $183 |
| Case Alternative #2 | Antec Three Hundred | $60 |
| Power Supply | Antec BP550 Plus 550W | $65 |
| Base System Total | $1039 - $1259 | |
Below $100, you can't beat AMD on the CPU. Personally I like having more than two cores on a system, which is why I went for the Athlon II X3 450. It gives you a great balance of price/performance without even breaking $80. The MSI 880GM is a good motherboard from an upgrade standpoint. You can always reuse the Athlon II X3 + 880G setup later on as an HTPC as long as you don't mind not having TrueHD/DTS-HD MA bitstreaming support. The rest of the system is well configured, with 8GB of memory that will be re-usable in whatever DDR3 platform you have next year.
People are always asking me what my ideal storage setup would be given my affinity for SSDs these days. The configuration above almost exactly mimics the setup I have at home. I've put a 128GB Corsair Force F120 based on the SandForce SF-1200 controller as the OS drive; you may want to upgrade your SSD in another 12 months or so which is the only reason I'd shy away from the F240. If you can get away with less space, then by all means go for it but I personally like having all of my applications and at least one frequently used game reside on my SSD to maximize the low-latency goodness.
If you don't have a NAS or some form of massive file storage at home, I highly recommend the SSD + two HDDs in RAID-1 approach. I grabbed a pair of 2TB Seagate Barracuda LPs for mass storage, although you could use smaller drives if you don't have a lot to store. These drives would be for other game installs, pictures, movies, music. The RAID-1 is just to protect things in case of a single drive failure, although you still want to have some sort of a backup plan external to your PC.
A good GPU is important if you're going to be gaming at all. I picked the Radeon HD 6850 because it is a good balance of price and performance and sufficient for most of my gaming needs at this point. While personally I'd probably opt for something faster, that's only because I tend to use relatively high resolution displays - no need in penalizing the system because of it.
The case selection is an interesting one. Typically I don't spend much money on a case in my builds, my focus is always on the internal hardware. Gary Key, our old Senior Motherboard Editor likes to view cases as an investment - something that'll last you several builds. I figured I'd give Gary's approach on this build and go overboard with the case. Corsair's Obsidian 800D is super easy to work inside, looks very sleek on the outside and seems like the type of case you could keep around for several builds. If you want to save a bit of money there are always cheaper alternatives from Antec.
Closing out the list is the power supply. We don't need to go overkill on power supply since we're not running a ton of hard drives or have a multi-GPU setup. The 550W Antec works well and is a decent choice to any midrange setup.
The end result is a system that's pretty quick today, and with a motherboard/CPU swap next year you've got a huge improvement in performance as well as leftover hardware to build a decent HTPC in the near future.
Facebook
Twitter
RSS
112 Comments
View All Comments
StormyParis - Friday, November 19, 2010 - link
htpc should fit into a stereo cabinet. you're trying to build a NAS + HTPC + desktop into one machine, which makes no sense at all. Split the thing in 3, with a real, small, silent HTPC, a NAS, and a mini-itx desktop, and you're much better off, for pretty much the same price.ajlueke - Friday, November 19, 2010 - link
While it is somewhat a matter of personal preference, I admit, some people really hate giant cases in the living room. I love having everything built into one system, and using it to serve the rest of the house and play Starcraft II on the big screen. The real downside, is then you are using a high end rig to serve you other computers as opposed to a NAS, and a NAS is going to have far superior numbers in the power consumption department.Mathieu Bourgie - Friday, November 19, 2010 - link
Good job on the builds everyone, great idea of getting several members of the AT's team to work together on this.Here are my opinions, suggestions and things that I'd personally change:
Dustin's AMD Pure Budget System:
Hard Drive: Actually, if you shop on Amazon instead, you can snap a Spinpoint F3 500Gb for about $46 and a 1TB for $53, without needing to find any coupons.
Power Supply: I'd mention that the Antec EarthWatts Green EA-380D 380W doesn't include a power cord in its package. Not a big deal for most of us, but still good to knowi f you don't have a spare cord.
DVD Burner: Why go with an IDE based model, which is out of stock by the way? Because the motherboard comes with a single SATA and a single IDE cable? Hardly a reason if you ask me.
Might as well get a SATA model that can be used for years and years, if you upgrade the system down the road. Going by customer's feedback on NewEgg, ASUS 24x SATA DVD Burner is one of the most reliable model available, for only $20: http://www.newegg.com/Product/Product.aspx?Item=N8...
Balraj's Intel Budget System:
The one stick of RAM is an interesting trade off, sure you lose dual-channel but you gain the ability to easily upgrade RAM down the road. Then again, a motherboard with 4 RAM slots would allow for both options.
Blu-Ray: The Samsung SH-B083L/BSBP has pretty bad reviews on NewEgg, I'd get the Samsung SH-B123L instead, which costs $20 more, but is also faster (12x vs 8x).
Power Supply: I cannot skip this: you really want to avoid using a low-end, generic power supply, for reliability purposes and to protect your components. You do not want to cut corners on a power supply.
Jarred's AMD Budget Gaming System:
You mention Crossfire support, but go with a motherboard that has the PCI-Express 16x slots running at 16x and 4x, which would bottleneck performance?
For a similar price, the ASRock 870 EXTREME3 comes with two PCI-Express 16x slots at 8x/8x, which are well spaced to allow both cards to "breath".
125W CPU, with a stock cooler? Sure, it's "adequate" for cooling in most cases, but that stock cooler is going to be heard from miles away when you game for hours and/or during hot summer nights if you don't have an AC. Not much of an issue if you play with headphones, but still, I'd get at least a Cooler Master Hyper 212 Plus CPU Cooler.
"Gaming depends primarily on your GPU" "You could even go with a cheaper CPU like the Athlon II X4 645 or the Phenom II X4 810"
Agreed for most games, but there are games that will be CPU bound (Think RTS like SC2, or MMORPG like WoW), where you'll want a powerful CPU that allow the GPU to flex its muscles.
Also, while the X4 645 isn't a bad CPU, losing the L3 cache and the lower frequencies are going to hurt performance quite a bit for video games.
Vivek's Midrange Intel System:
Once again, Crossfire is mentioned, but the second PCI-Express slot runs at 4x...
An ASRock P55 EXTREME4 will fix that and if you want USB 3.0 and SATA 6.0Gb/s at the same time as Crossfire 8x/8x, you'll want an ASUS P7P55D-E Pro, which features a PLX chip, making it one of the few P55 boards that can run SATA 6.0Gb/s, USB 3.0 and Crossfire 8x/8x all at once, unlike most boards where USB 3.0 and SATA 6.0Gb/s will fall back to USB 2.0 and SATA 3.0Gb/s due to the lack of bandwidth (lack of PCI-Express lanes, thanks to the P55 chipset).
PSU: OCZ don't exactly make the most reliable PSUs, with the biggest issue being that reliability varies from a model to another, since they use various manufacturers for their PSUs. You get what you pay for with a PSU and a solid Corsair or Seasonic PSU will serve you much better IMO.
Raja's Midrange AMD Overclocking System:
I actually agree with all your choices and like how you didn't strictly stick to NewEgg. Way to go.
Raja's Midrange Intel Overclocking System:
I'd avoid the ASUS Maximus III GENE like the plague. I used to recommend it, until I'd hear back from so many readers that had issues with it (Read some review on NewEgg) that I had no choice but to stop recommending it, because it's so unreliable.
Ryan's High-End Gaming System:
Way to go for keeping noise somewhat under control. Once again though, an IDE DVD Burner in a 2k+ system? Really?
Also, the sound card is priced at $100, not $75, unless I missed something here.
Brian's Intel Dream PC:
Hahaha, now you're talking! Couldn't agree more on the motherboard, which is a one of a kind.
Just one thing though: You forgot CPU Coolers, since Xeon CPUs don't come with any.
Also, why ECC RAM? ECC seems kind of futile for a Gaming PC.
Keyboard: Yes! Mechanical keyboards are the best. I personally recently got a Filco with MX Cherry Blue switches and that keyboard helped me increase my WPM typing speed tremendously. The feedback and noise is also great for gaming.
Mouse: I've always been a fan of the Logitech MX-518, which remains excellent years after its release and offers a great bang for your buck too.
Don't have much to add to the HTPCs, they make sense and quite frankly, it's a matter of personal tastes too.
Except for a few things mentioned above, great job all on the builds. Although I'm a bit sadden to not have seen any Workstation build.
P.S. For those who wonder about my experience building PCs and the like, I’m a computer enthusiast with 10 years of experience in building, fixing and modifying computers, who has been writing about/offering PC Builds of all kinds (Gaming, HTPC, Workstations, etc.) at various price points on my own blog (www.hardware-revolution.com) for over two years and a half now.
Cheers,
Mathieu
Ben90 - Friday, November 19, 2010 - link
I agree completely on the inclusion of a mechanical keyboard, they are the SSDs of the keyboard world. Once you try to type on rubber domes again it feels absolutely horrible.Personally I am a Cherry Black guy as I like the linear travel for gaming, but for typing its impossible to beat Cherry Blues unless quietness is a metric.
bji - Friday, November 19, 2010 - link
How do you feel about scissor switch keyboards? I like them as I find them to be much less mushy than rubber dome keyboards, but alot quieter and with less key travel than mechanical keyboards. I use the Kensington "Slim Type Keyboard" (that's what it says on the bottom, I can't remember the exact model number) and highly recommend it.Tom_S - Friday, November 19, 2010 - link
Concerning keyboards etc. I *have* been living under a rock and had not heard of the DAS keyboard that sounds interesting, but while under the rock I have been using my Northgate and Avant keyboards (made by CVT Inc) which were always the gold standard in mechanical keyboards. I looked at the site, and it appears that the lesser of the Avant kbds is not available right now, but the Stellar is.http://www.cvtinc.com/products/keyboards/menu.htm
I concede that these are old fashioned - not USB without an adapter, no USB hub, but they have been around since the 1980's and are noteworthy. To further date myself, one of their features has been to remap the left ctrl and caps lock keys (moving ctrl next to the "a" key), for those of us still used to old terminals and editors/programming environments that use control keys.
strikeback03 - Friday, November 19, 2010 - link
Are the current Samsung HDDs any good? A couple years ago I bought a Samsung HDD recommended on this site for a build for work. First one wouldn't allow an OS install. RMAed it, got a replacement. That one died a few months later. RMAed that, bought one from another brand, and after testing the third Samsung to be sure it could be formatted when we got it just kept it on the side for emergency use. Can't say I'm anxious to try again.Mathieu Bourgie - Friday, November 19, 2010 - link
Samsung HDDs are some of the best drives on the market in my opinion. Their F3 and F4 (The 7,200 rpm 320GB model that is) line-up offer some of the best throughputs rates in MB/s, are very reliable and emit very little heat.For the average latency time, the Western Digital drives tend to be better, although they run hotter and have slightly lower reliability. For Gaming, I'd say that WD drives are the best, but quite frankly, you wouldn't be able to tell the difference between a system equipped with Samsung or WD drives.
Also, keep in mind warranty: W.D. offers 5 years on their Black Caviar line-up, as opposed to 3 years on their Caviar Blue and 3 years for Samsung drives.
JarredWalton - Friday, November 19, 2010 - link
I did try to price-check everything using our internal pricing tools (Dynamite-Data is an AnandTech affiliate of sorts), so where I could find clearly better prices from other than Newegg I went that route. Obviously, 10 systems or whatever makes it a bit difficult to get every little detail, which is why some IDE DVDRW drives slipped in. Oops!The CrossFire/SLI issue on lower end motherboards (i.e. P55 with x16/x4) was another one that I wracked my brain on for a good long time. I'd really like to go the Biostar route on Vivek's setup (or the overclocking board), but truthfully I'm a bit gun-shy with Biostar. I've had decent boards in the past from them, and other boards that sucked hard. Price is another item that I kept running into -- I don't want to recommend an expensive Intel board when SB is coming so soon.
I'll try to go through and update the optical drives to be SATA, though. Shame on my fellow writers for being so lazy! :-) Thanks for the comments.
JarredWalton - Friday, November 19, 2010 - link
Okay, I made some updates and added some additional commentary where appropriate. But I chose to disagree (or let the editors disagree at least) with some of your comments. IMO, there's no need for aftermarket cooling on CPUs if you don't intend to overclock, so I left my build without one.The other big issue is Newegg reviews; they're just not reliable by any stretch. We've had motherboards that our guys loved that get mediocre scores at Newegg because of idiot users. "Gee... my memory isn't working and I plugged it in, never looked at the BIOS, never updated the BIOS. What's wrong with this board!?" Likewise, some items get 5 eggs not because they're the best but because a lot of buyers think they're a great value... and they wouldn't know quality if it walked up and punched them in the nose. So, while I generally avoid stuff that gets 3 eggs or less, the 4/5 egg stuff may be decent, good, or great depending on the user. Plus, people with problems are about 10X more likely to post as people where everything worked fine.
Anyway, thanks for the corrections/suggestions.