• What
    is this?
    You've landed on the AMD Portal on AnandTech. This section is sponsored by AMD. It features a collection of all of our independent AMD content, as well as Tweets & News from AMD directly. AMD will also be running a couple of huge giveaways here so check back for those.
    PRESENTED BY

As we’ve covered a number of times now, AMD has been heavily pushing Eyefinity across its entire range of Radeon HD 5000 series cards. Depending on the GPU in use the 5000 series can drive up to several monitors, however because each TMDS transmitter pair necessary for driving a DVI/HDMI port requires an independent clock source, the 5000 series can only drive 2 such ports. The bulk of AMD’s flexibility is with DisplayPorts, where they only require 1 clock source between them allowing AMD to offer upwards of 6 DisplayPorts at once.

The problem for AMD is that DisplayPort adoption has been slow.  DisplayPort is meant to be the successor to DVI in the PC space, affording smaller connectors and higher resolutions than DVI, while also being able to directly drive LCD panels and to be able to do all of this royalty-free. However with the boom in LCD 1080p monitors – many of which are effectively repurposed LCD TV panels – this transition has been slow to come. Even AMD’s showpiece display – the multi-monitor Samsung MD230X3/MD230X6 - only finally began shipping this month after being demoed as early as last September. Ultimately while the situation is improving, DisplayPort-capable monitors are still few in number, mostly confined to high-end monitors.


An existing Apple dual-link DVI adapter

As a result, budget Eyefinity setups have been unnecessarily expensive. The solution up until now for using 3 DVI/HDMI monitors in Eyefinity has been to use an active dual-link DVI adaptor, which converts the DisplayPort signal in to something suitable for a dual-link DVI port. The biggest issue with this is the price – an active dual-link adaptor costs around $100, as much as a Radeon HD 5670. AMD has needed a cheaper method to enable Eyefinity with DVI/HDMI monitors, and that has finally arrived in the form of the active single-link adaptor.


Active Mini-DP and DP to DVI adapters

The active single-link adaptor, as the name implies, actively converts a DisplayPort signal to a single-link DVI/HDMI signal. The difference from the dual-link adaptor comes down to power consumption and complexity: to drive a single-link DVI port, you only need half as many TMDS transmitters as is necessary for a dual-link port. With simpler hardware the active single-link adaptors can also be run on the meager amount of power supplied with a DisplayPort connection (3.3v@500mA), meaning a secondary USB plug to draw power from a USB port is no longer necessary.

In turn the reduction in complexity brings down the price of the hardware. Currently active dual-link adaptors go for around $100, but AMD is estimating the price on active single-link adaptors to be significantly cheaper at $30. The fact that it’s an active converter means it will never be cheap as simple mechanical/passive converters, but it also means that the price of a 3rd DVI/HDMI port for Eyefinity no longer costs more than some of the cards themselves.

The adaptors will come in two types: a full-sized DP-to-DVI adaptor, and a mini-DP-to-DVI adaptor. DP and mini-DP are electrically the same, so the difference comes down to best suiting the device in question: mini-DP for laptops and exotic cards like the Radeon HD 5870 Eyefinity6, and regular DP for desktop cards that have a regular port.


Active adapters are labeled with "Active" to differentiate them from passive adapters

For the adaptors we’re looking at today, they will be differentiated from passive adaptors by the addition of the word “Active” on the underside of the adaptor. It’s also worth noting that while these are single-link adaptors, the DVI port is a dual-link DVI-D port, meaning that dual-link cables will work with these adaptors in single-link mode, but DVI-I cables will not work.

In our own testing the adaptors worked as claimed. We were able to drive an 3x1920x1200 Eyefinity setup using an active adaptor, fundamental proof that the adaptor worked. Users with fairly old drivers may get a superficial "Lower setting applied" error from AMD's drivers, as they don't know what to make of a single-link adaptor.


Dual-link port for cable compatibility

Furthermore while AMD is promoting this given their heavy investment in to DisplayPort, there’s no reason that these adaptors won’t also work with NVIDIA and Intel GPUs, as these are active adaptors capable of converting any DP signal. For that matter the adaptors aren’t an AMD design (the adaptors are designed and built by 3rd parties), but for the time being it’s AMD who’s doing the heavy promotion.

Finally, availability is expected to be in early September, with an MSRP of $30. E-tailers will be selling adaptors from both traditional AMD partners and 3rd parties who specialize in adaptors, and we’d expect most if not all of these adaptors to be simple rebadges of the adaptors we received today. Also be on the lookout Radeon cards with these active adaptors bundled in, as some of AMD’s partners will be participating in the release of these adaptors.

POST A COMMENT

24 Comments

View All Comments

  • Ninjahedge - Wednesday, September 01, 2010 - link

    Pardon my confusion on this guys.

    These little puppies plug in to be able to split the DVI port signal out to multiple monitors? All the pics shown show one DVI sized connection and one USB looking connection. How is this hooking up?

    And lowly me with my 4870 is wondering if he can take his current dual 1600x1200 setup and add a third widescreen on the end for desktop space/sharing on the server or if this is still an impractical solution that will hav emy card begging for release when I try and start up a game on one of the monitiors......

    TIA!
    Reply
  • CptTripps - Thursday, September 02, 2010 - link

    Ok, at $30 I can ow use any (3) monitor I want. I might actually go eyefinity now. Reply
  • Jellodyne - Tuesday, September 07, 2010 - link

    Since these won't do 2048×1152, it looks like I'm still waiting for a GOOD active dual link adapter.

    Basically there's two models on the market now, the Accell (and a bunch of identical Accell clones including Dell's part) and the Apple adapter. Apart from the high cost, both of these have some serious problems. The Accell is fine, as long as you don't mind your screen flashing on and off all the time. When it works it looks good. I tried feeding it power from a hub or a usb phone charger power brick to no avail. Within a half hour of use the thing spends more time off than on. The Apple has all sort of analog looking snow in the image, plus some people are reporting it also suffers from blackouts. And also it's mini-displayport, so in my case I'd need an addition displayport to mini-dp cable adpater.

    Or AMD could figure out how to port the video out the two DVIs on a crossfired card. I mean, just have the second card render that part of the display. How hard could it be? I'd love to get a second 5770 and just use those ports. And then AMD gets my money, not some adapter company.
    Reply
  • geogan - Monday, December 20, 2010 - link

    Where can I buy these Mini-DP -> DVI adapters????? All I see is the Sapphire one but it is for 5000 series with DP output!!! Where is the Mini-DP one pictured in article available? Reply

Log in

Don't have an account? Sign up now