When it debuted at CES 2009, the 0.65” Dell Adamo 13 gave the notebook world a Windows equivalent to the MacBook Air. With the ultrathin body, the brushed aluminum unibody, and Apple-like attention to detail, the Adamo was truly stunning to behold. Unfortunately, at $1999, it was extremely pricey given the lackluster specifications – with a 1.2GHz Core 2 Duo ULV processor, 2GB of non-upgradable memory, and Intel’s GMA 4500MHD, it was slower than the 1.6GHz MacBook Air, which also had an Nvidia 9400M graphics chip while being cheaper and lighter. The only things the Adamo had going for it compared to the Air were the standard 128GB solid state drive and the slightly thinner chassis. Critics were unimpressed, calling it underpowered and overpriced, and the Adamo never sold well.

Fast forward to now: the Adamo has been on shelves for a year, and the price has now dropped to $999 on Dell’s website for the base Adamo “Admire”. The base processor is now the 1.4GHz Core 2 Duo SU9400, the second fastest processor in the CULV platform. The higher end “Desire” model switches to the low-voltage 2.13GHz SL9600, 4GB of memory, and a 256GB SSD, but the price jumps to $1699. The real question is, at $999, can the Adamo 13’s supermodel styling and aluminum unibody make a compelling sales pitch over the vast number of CULV competitors?

Dell Adamo 13 Specifications
Processor Intel Core 2 Duo SU9400
(1.40GHz, 45nm, 3MB L2, 800FSB, 10W)
Chipset Intel GS40
Memory 1x4096MB DDR2-667 @ 4-4-4-12 Timings
Graphics Integrated Intel GMA 4500MHD
Display 13.4" LED Glossy 16:9 WXGA (1366x768)
Hard Drive 1.8" 80GB SSD (Intel X18-M G1)
Networking Atheros AR8131 PCI-E Gigabit Ethernet
Intel WiFi Link 5100 802.11a/g/n WiFi
Audio Realtek AL269 2-Channel HD Audio
(2.0 Speakers with headphone/microphone jacks)
Battery 4-Cell Li-Polymer, 10.8V, 4400mAh, 40Wh
Front Side None
Left Side None
Right Side SIM Card Slot
Microphone/Headphone Jacks
Back Side 2 x USB 2.0
DisplayPort eSATA Ethernet AC Power Connection
Operating System Windows 7 Ultimate
Dimensions 13.03" x 9.5" x 0.65" (WxDxH)
Weight 4.0 lbs
Extras 1.3MP Webcam
Available in Pearl and Onyx
Warranty 1-year standard Dell warranty (USA)
Price Onyx Adamo Admire starting from $999

Our Adamo review unit has a mix of specs – everything from the Admire, plus 4GB of memory and upgraded with an 80GB Intel X18-M solid state drive and Windows 7 Ultimate. Overall, performance should be pretty similar to the Admire, since the main difference in the Desire is the faster (and more power-hungry) SL9600 processor.

Interestingly, this will be our first experience with the faster SU9x00 series of ultra low voltage processors (previously we’ve only looked at the dual core SU7300/SU4100s and the Core 2 Solo SU3500), and also the first time testing the combination of CULV and a solid state drive. Given the lowering cost of SSDs in the current market, it’s becoming tempting to pair the low-power CULV platform with a flash-based drive to get as much battery life as possible from any given system. Now, given the small 40Wh Li-poly battery (not user replaceable, a la Apple), we’re not expecting the Adamo to break any battery life records, but it will be interesting to see how big a difference the SSD makes in battery usage rate.

Dell Adamo 13: Awesome Industrial Design
POST A COMMENT

67 Comments

View All Comments

  • MrSpadge - Tuesday, July 06, 2010 - link

    You might want to take a look at the new Thinkpad X201 using Core iSomething. Reply
  • Stokestack - Tuesday, July 06, 2010 - link

    Except for the glossy screen. Glossy screens are the biggest regression in personal computing ever.

    The current fraud of glossy screens originated with third-tier products being peddled at Best Buy and Costco. It's sad to see companies like Apple following their lead, to the detriment of their customers.
    Reply
  • sebmel - Wednesday, July 07, 2010 - link

    I read AnandTech because of the intelligence & depth of the articles. This one is a disappointment. It reads like a paid for vanity piece for Dell.

    For example:
    "Apple’s products follow the design principles laid out in Dieter Rams’ 10 Commandments, which pretty much condenses to “Thou shalt be minimal, thou shalt be elegant, thou shalt be functional.” Dell took those design principles and then added some bling to it."

    I do not believe Anand would have written such a confused, illogical statement.

    Minimalism with added bling?

    What is that? Elegance with added vulgarity? Refined taste with added redneck?

    The article comes to the conclusion:
    It's slow
    The keyboard is cheap
    The speakers are lousy and in the wrong place
    The battery life is poor
    The screen's mediocre
    It's pricey

    But look at the bling!!

    Well, what is there to look at? This miracle of industrial design is designed like an ice-cream tub... a tray with an inset top, resulting in an ugly seam. They combine that with an ugly exposed hinge and an ugly ledge behind it.

    It is covered in immature touches like: the irregular material use and finishing... 4 finishes on the top alone; irregularly cut vents; white plastic inserts on sockets; an ugly squared of shape dictated by the cheap tub design.

    Let me give a word of warning to those who may be thinking of buying this based on the recommendation that the 'bling' deserves respect.

    Do you see that band of polished aluminium on the top? That will be painted with varnish to stop oxidation. That varnish will scratch and fail. Oxygen will get behind it and the aluminium will oxidise white, bubbling up.

    That isn't clever design & it isn't going to look: bling for long... even if you learnt your idea of good taste from pimps.

    As for using Dieter Rams' name in the description of this product, please, show a little more taste. You may as well have quoted Bertrand Russell in an article about Forest Gump:

    "Laif is laak a baax a chaaclets..."
    Reply
  • rtothedizzy - Wednesday, July 07, 2010 - link

    You don't like the design. I get it. That's fine, to each his own.

    But oxidizing the aluminum strip???

    Not to get too crazy into the details but any and all aluminum you see is oxidized. Aluminum and O2 in the air react in less than a nanosecond to make an oxide layer a few nm thick on all exposed aluminum surfaces. That oxide layer protects the rest of the aluminum below the surface from being oxidized and has little effect on the appearance of the metal.
    Reply
  • sebmel - Wednesday, July 07, 2010 - link

    I am afraid that is not the case. Aluminium does not oxidise immediately and the process of oxidations does not stop at the surface when that surface is covered with lacquer.

    The oxide and dirty get under a lip of varnish and the tarnishing is worse than exposed aluminium.

    Aluminium oxide is white. In order for a manufacturer to prevent an aluminium object from becoming dull it is necessary to varnish it. Yes, aluminium does oxidise readily, but not so fast that it cannot be polished, or brushed, and then lacquered.

    An aluminium Audi R8:
    http://farm5.static.flickr.com/4025/4530109473_818...

    Apple made this error with the latch buttons on the MacBook Pros. As a solution they moved to neodymium magnets.

    An example of the corrosion purchasers of this Dell laptop can expect:

    http://farm3.static.flickr.com/2122/2199107630_340...
    Reply
  • rtothedizzy - Wednesday, July 07, 2010 - link

    I'm afraid it is the case.

    From the textbook "Corrosion Basics: An Introduction":

    "The factor which assures the long life of aluminum is its self forming microscopically thin surface layer of aluminum oxide. This layer is so thin that it is measured in atomic units. The air-formed film on new aluminum surfaces is about 2.5 nm thick, while the film on aluminum that is several years old may be 10 or more nm thick"

    We can get into oxidation rates some other time.

    Assuming you really wanted to polish and brush some Al and then lacquer it I'm sure there is a way but it really shouldn't be necessary. There are plenty of other ways to get a shiny surface on a metal (Al included) that would require none of the above.

    Chances are in this case the Al has been anodized (which makes it even MORE corrosion resistant) and electroplated with something shiny (chromium perhaps).

    The only way you're going to have oxidation problems with Al is if it's alloyed with some other easily corroded metal or if you expose it certain chemicals.
    Reply
  • sebmel - Friday, July 09, 2010 - link

    All you have to do is look at the pictures of the Audi and the Dell laptop to see that they were not anodised. They have a very obvious layer of transparent lacquer on them.

    As for immediate oxidation: no, it is not necessary to polish and lacquer aluminium in an anaerobic environment because the metal does not oxidise to a dull finish instantly, as lithium does.

    If one must be pedantic it is correct to say that oxidation does start immediately but not fast enough to hinder lacquering... just buff up an aluminium pot and watch it.

    As for the oxidation stopping. No it doesn't. The aluminium industry likes to say it does but it doesn't. Again... look at some kitchen pots. Look at one used yesterday, last week and last month... they do not look the same... they don't even feel the same on the surface. To anyone who uses aluminium pans (and I don't recommend you do) this is obvious.
    Reply
  • mojohacker2010 - Saturday, July 10, 2010 - link

    HE gave you a SOURCE and cited word for word from the source to support his argument, AND YOU RESPONDED WITH YOUR OPINIONS, not facts, and by saying "No it doesn't." Reply
  • sebmel - Monday, July 12, 2010 - link

    There are two ways to learn: one is to read and repeat what you have read and the other is to think and research (as the people who wrote the books did).

    So use the second method, please. Abrade an aluminium pan. If it oxidises in milliseconds to a dull whitish grey then rtothedizzy is correct.

    If it stays shiny for say 5 minutes, long enough to lacquer, then I am correct. And you'll have found the answer without any need for that caps lock ranting.
    Reply
  • sebmel - Monday, July 12, 2010 - link

    Having looked more closely at the photos it looks probable that the aluminium band on the lid isn't lacquered. If that is the case then it needs to be pure aluminium to resist corrosion well. As you pointed out, the alloys are not so resistant.

    However, there is still an issue with sweat, which can be pH4... aluminium oxide is stable between pH5 and pH9 (I haven't the exact figures).

    Here's some sweat induced corrosion on a gun:

    http://themartialist.com/images/cherrysnub03.jpg

    and here, again, is the same thing happening on a MacBook Pro:

    http://farm3.static.flickr.com/2122/2199107630_340...

    Just for good measure, here's a badly corroded aluminium iPod:
    http://admintell.napco.com/ee/images/uploads/apple...

    This is a rather long defence of a simple comment:
    That aluminium strip on the lid is liable to corrode. The plate on the base too. The anodised parts will be more resistant.
    Reply

Log in

Don't have an account? Sign up now