I own a total of five Xbox 360s. Four of them have died. Three because of the Red Ring of Death, all out of warranty. Many have had serial Xbox 360 failures, I had them in parallel.

The last revision of the Xbox 360, codenamed Jasper, was supposed to fix the infamous RRoD problem. So far my Jasper has been running fine. While Microsoft never confirmed the cause the RRoD seemed to be a result of poor cooling and manufacturing issues (either at the die/underfill level or at the solder level or both).

Needless to say, I wasn’t terribly happy about purchasing a sixth Xbox 360, but here it is:

This is the latest revision of the Xbox 360, commonly referred to as the Xbox 360 Slim thanks to its shrinking in virtually all dimensions compared to the previous white box:

The internals are mostly new, featuring for the first time a single chip with CPU, GPU and eDRAM. Prior to this motherboard revision the Xbox 360 motherboard had two discrete packages, one with the CPU and one with the GPU + eDRAM.

The old Xbox 360 had eDRAM and GPU - Xenos on a single package (right), plus a separate chip for the CPU - Xenon (left)

For those of you who don't remember, ATI originally designed the Xbox 360's GPU and called it Xenos. The GPU was the first we ever looked at that used a unified shading architecture, so there were no dedicated pixel or vertex units. The core was made up of 48 shader processors and each SP could work on a vect4 plus a scalar op in parallel. These days we'd probably call it a GPU with 240 cores, although it's a bit dated from a functionality standpoint. The GPU runs at 500MHz and is also home to the memory controller.

On a separate die, which ATI referred to as the daughter die, was 10MB of embedded DRAM along with all of the hardware necessary for z and stencil operations, color and alpha processing and AA. This eDRAM and associated logic helped Microsoft bring AA to games and improve overall performance compared to what was possible at the time with conventional architectures.

The CPU, codenamed Xenon, implemented three in-order PowerPC cores with SMT support - meaning the whole chip could work on six threads at the same time. The design was ahead of its time but given its 90nm manufacturing process it only had 1MB of L2 cache to share among all three cores. These days it isn't really considered the ideal approach to a many-core CPU. Private L2 caches with a large shared L3 cache is preferred for scaling beyond two cores.

Leading up to Jasper, each die was shrunk independently with each Xbox iteration. The table below shows us how:

Xbox 360 Revision CPU GPU eDRAM
Xenon/Zephyr 90nm 90nm 90nm
Falcon/Opus 65nm 80nm 80nm
Jasper 65nm 65nm 80nm

With the new Xbox 360 (codenamed Valhalla), at least two, possibly all three of the die are combined and placed on a single package:

Bringing it all onto (presumably) a single die makes cooling much simpler as now there’s only one heatsink and one fan for all of the major heat generating components in the unit. This level of integration is made possible only by the not-so-magic of Moore’s Law. At 40nm it shouldn’t be a problem to bring all of those components onto a single reasonably sized die, which in turn reduces Microsoft’s manufacturing costs. It’s not totally clear whether Microsoft is building these chips on a 40nm, 45nm or 55nm node. The 40nm approach would make the most sense but TSMC is very capacity constrained at this point so it would be a slow ramp before all Xboxes got the Valhalla treatment. Update: Apparently 45nm is the magic number. The new CGPU is rumored to be made at Chartered Semiconductor, now under the ownership of Global Foundries.

The uncertainty is because of a pesky heat spreader. While previous Xbox 360 CPU/GPUs were visible to the naked eye once you popped the heatsink off, the Valhalla design has a heat spreader covering the Xbox CGPU (Microsoft’s term, not mine). Unwilling to potentially kill yet another Xbox 360, I’ve left my heat spreader intact for the purposes of this article.

What follows is an entire dissection guide for those of you who want to get inside the new Xbox 360 (for whatever reason you might have ;), as well as some power/noise information for those of you contemplating the upgrade.

Enjoy.

Much Prettier than the Original
POST A COMMENT

109 Comments

View All Comments

  • kratos4u - Saturday, July 03, 2010 - link

    xbox 360 console sells high = pirated copies

    if MS take measures to stops piracy 100% = sales down

    torrent = xbox 360 sales.

    any 1 agree

    sorry xbox 360 fanboys
    Reply
  • evilowner - Tuesday, August 17, 2010 - link

    ur logic is flawed big time any type of data is torrent..... before u target 1 thing plz do alittle research PS3 GAMEES ? also ? 0_o moives? music? programs etc do i need to keeping typing dump little kid.... torrents is to lower prices so ur not paying 150 for ur low quality data.... torrents keep prices in check... period. Reply
  • viocosi - Thursday, July 08, 2010 - link

    In the new xbox 360 slim is possible to use the iXtreme firmware? Reply
  • fiftey - Monday, July 12, 2010 - link

    As the article shows, there are minor improvements in power consumption and noise levels with the larger single fan, but I don't care about noise levels. The issue I have is does this fan provide sufficient cooling? With lots of people complaining on amazon.com that their brand new Xbox 360 S is already red-lighting and breaking down, I wonder whether microsoft have messed up again by focusing too hard on lowering noise levels by using a larger fan and lowering fan speeds and not providing sufficient cooling for the singular, larger heatsink.

    I'd like to see some comparison data on the operating temperatures of the valhalla and jasper and if the new xbox is indeed still running hot, a step by step tutorial of how users can simply mod their new 360s so that the fan is always at max speed
    Reply
  • tipoo - Thursday, July 14, 2011 - link

    AFAIK the failure rates of the new slims are below 1% (don't remember the source) vs above 30 for the original. All electronics have a certain failure rate, below 1% is good enough for me. Reply
  • draco2210 - Saturday, July 17, 2010 - link

    anyone heard any news or updates about flashing the new DG-16D4S drives yet? Reply
  • pfeifer220 - Tuesday, July 27, 2010 - link

    I lost the connector and power brick to my new 360 slim, does anybody know where or how I can purchase just these 2 items alone? Reply
  • butanebob - Thursday, July 29, 2010 - link

    "Needless to say, I wasn’t terribly happy about purchasing a sixth Xbox 360, but here it is:"

    People like you are the reason the RROD was even an issue. No wonder microsoft didn't bother sorting it out 5 years ago....
    Reply
  • walkerfsu18 - Monday, August 02, 2010 - link

    i have the 360 slim but on it i hate how its the same as ps3,there are these white spots i just cant get off,i tried everything,any ideas? Reply
  • evilowner - Tuesday, August 17, 2010 - link

    1st off why argue over a shitie disk? dvd n blue-ray both fucking suck peroid. MY HARD DRIVE..... yea i said it..... the hard drive loads and stores way more than both of those n are both garbage. my hard drive loads a million times fast than both of them : P so any type of dvd isnt the future its ur hard drive......... 1 it loads a million times faster. 2 . it holds way more... uhhh terabyte hard drives.... come on.... why would i want a dvd or a blue ray disk?? yup i wouldnt..... they shouldnt even make disks anymore..... when u can dl the game to the hard drive n be done with it n never ever have to buy the game again..... or movie or even music..... enought is said, if u dont get it...sigh.... than u will never know how close to the future u truely are, n should go back into ur cave. ty. peace ! Reply

Log in

Don't have an account? Sign up now