Gigabyte H55N-USB3 : Mini-ITX done the Gigabyte way...
by Rajinder Gill on June 15, 2010 7:49 AM EST- Posted in
- Motherboards
- Intel
- Gigabyte
- Mini ITX
Sorenson Squeeze 6
We are using Sorenson Squeeze to convert eight AVCHD videos into HD Flash videos for use on websites. This application heavily favors physical core count and processor clock speed.
WinRAR 3.9 x64
This benchmark compresses our AT workload consisting of a main folder that contains 954MB of files in 15 subfolders. The result is a file approximately 829MB in size.
Bibble 5.0
We utilize Bibble Labs' Bibble 5 v2 to convert 50 RAW image files into full size JPEG images with the program's default settings. This program is fully multithreaded and multi-core aware.
File Transfer to USB
In this test we use Sharkoon's USB QuickPort with a 1TB Western Digital hard drive and transfer a 1GB file from a 1TB HDD connected to the Intel PCH.
USB 2.0 transfer times are not class leading for the H55N-USB3, however, we can give one mark to Gigabyte for supporting USB 3.0 on this board as standard. Demands for the technology have not quite taken off yet, but there are some gains to be had even if you can't afford the fastest SSDs to team up with the Sharkoon drive bay. Of course, the importance of these gains comes down to how often you transfer large files over to an external drive, and if time is of the essence.
Facebook
Twitter
RSS
77 Comments
View All Comments
Rajinder Gill - Tuesday, June 15, 2010 - link
I've just searched the web and found reports of TV tuner cards working with the Intel DH57JG with a Clarkdale CPU. Hope this helps shed a bit of light. I'll get some PCIe cards in to help out with testing this end too.I will contact Gigabyte for you first thing. Which motherboard is it?
Regards
Raja
ajp_anton - Tuesday, June 15, 2010 - link
Motherboard: ga-h55m-ud2hTuner: pxdtv 2300h
Doesn't really matter to me now, I sold it and went for AMD instead.
Khenke - Tuesday, June 15, 2010 - link
Was planing to build an ultra compact gaming rig (and build a case my self) with this moderboard an i5 750 and HD5850. My aim was to OC the 750 to 3.8GHz and use the H50 to cool it, but thanks to you guys I now know I have to wait until Asus releases a mini-itx card and do it right.But what would be nice is if you could test any other cooling on it that fit (so we know if any coolers at all fit), preferably low profile coolers as I want my case no thicker than 12cm :)
Thanks for en excellent review.
Rajinder Gill - Tuesday, June 15, 2010 - link
If you're willing to do a bit of DIY, you can trim the mount of the H50 down a bit to fit the hole. Not ideal I know. I'll see if Gigabyte have a list of low-profile coolers that will work (or if they'll put a list together) - any updates and I'll post back here.-Raja
forumator - Tuesday, June 15, 2010 - link
Nice, would be great to have that info, thanks Rajinder.Khenke - Tuesday, June 15, 2010 - link
Ah. Thanks Raja.Since I'm planing to make an all aluminum 19x27x12cm (inner size so add max 1cm for the material) case a little work on the H50 wont be much of a problem :)
But I am very interested in a list with low-profile coolers too, since I could slim it down 1cm then.. :)
The H50 was the solution for a very bad placed cpu socket.
Been hunting some info on compatible coolers but with no luck so far.
I so want to get my gaming rig in a backpack..
Rajinder Gill - Tuesday, June 15, 2010 - link
Off the bat, anything push-pin will work. Not sure how many push pin type coolers there are that make any sense over the Intel cooler though.Anything with a screw clamp fitting will need to be assessed on a case by case basis, as there are also some SMT resistors and a couple of what look to be feedback compensation capacitors to the left of the hole (near the circled transistor). You really don't want to knock those off or damage them.
I'll ping GB in the morning and see if they want to put together a list for their homepage - I suspect a lot of people will appreciate the info. I only have a couple of old tower sinks and the H50 at hand, so I've either gotta scour around the web hoping I call it right, or enlist some help :)
-Raja
jaydee - Tuesday, June 15, 2010 - link
I am glad you posted results from "AutoCAD 2010 x64—Cadalyst 2008" with both the IGP and the discrete video card. Is there any chance we can see this benchmark on video card reviews (Ryan)? I'd be really interested in seeing a comparison of 3D benchmarks as well as games across the video card spectrum.forumator - Tuesday, June 15, 2010 - link
Would have liked more info on what aftermarket coolers will fit with a graphics card in the pcix slot...especially ones that would fit in a small case, this is a MITX board after alljaydee - Tuesday, June 15, 2010 - link
I would think that'd be way more dependant on the case, than it would be the motherboard.