Strength in Numbers, What makes SSDs Fast

Given the way a single NAND-flash IC is organized one thing should come to mind: parallelism.

Fundamentally the flash that’s used in SSDs cut from the same cloth as the flash that’s used in USB drives. And if you’ve ever used a USB flash drive you know that those things aren’t all that fast. Peak performance to a single NAND-flash IC is going to be somewhere in the 5 - 40MB/s range. You get the faster transfer rates by reading/writing in parallel to multiple die in the same package.

The real performance comes from accessing multiple NAND ICs concurrently. If each device can give you 20MB/s of bandwidth and you’ve got 10 devices you can access at the same time, that’s 200MB/s of bandwidth. While hard drives like reads/writes to be at the same place on the drive, SSDs don’t mind; some are even architected to prefer that data be spread out all over the drive so it can hit as many flash devices as possible in tandem. Most drives these days have 4 - 10 channel controllers.

The Recap

I told you I’d mention this again because it’s hugely important, so here it is:

A single NAND flash die is subdivided into blocks. The typical case these days is that each block is 512KB in size. Each block is further subdivided into pages, with the typical page size these days being 4KB.

Now you can read and write to individual pages, so long as they are empty. However once a page has been written, it can’t be overwritten, it must be erased first before you can write to it again. And therein lies the problem, the smallest structure you can erase in a NAND flash device today is a block. Once more, you can read/write 4KB at a time, but you can only erase 512KB at a time.

It gets worse. Every time you erase a block, you reduce the lifespan of the flash. Standard MLC NAND flash can only be erased 10,000 times before it goes bad and stops storing data.

Based on what I’ve just told you there are two things you don’t want to do when writing to flash: 1) you don’t want to overwrite data, and 2) you don’t want to erase data. If flash were used as a replacement for DVD-Rs then we wouldn’t have a problem, but it’s being used as a replacement for conventional HDDs. Who thought that would be a good idea?

It turns out that the benefits are more than worth the inconvenience of dealing with these pesky rules; so we work around them.

Most people don’t fill up their drives, so SSD controller makers get around the problem by writing to every page on the drive before ever erasing a single block.

If you go about using all available pages to write to and never erasing anything from the drive, you’ll eventually run out of available pages. I’m sure there’s a fossil fuel analogy somewhere in there. While your drive won’t technically be full (you may have been diligently deleting files along the way and only using a fraction of your drive’s capacity), eventually every single block on your drive will be full of both valid and invalid pages.

In other words, even if you’re using only 60% of your drive, chances are that 100% of your drive will get written to simply by day to day creation/deletion of files.

The Anatomy of an SSD The Blind SSD
POST A COMMENT

236 Comments

View All Comments

  • Erickffd - Friday, March 20, 2009 - link

    Also created an account just to post this comment.

    Really impressive and well done article ! Will stay tune for further developments and reviews. Thank you so much :)

    Also... very impressed by OCZ's respond and commitment upon end users needs and product quality assurance (unfortunately not so commun by large this days among other companies). Certanly will buy from them my next SSDs to reward and support their healty policy.

    Be well ! ;)
    Reply
  • Gasaraki88 - Friday, March 20, 2009 - link

    This truly was a GREAT article. I enjoyed reading it and was very informative. Thank you so much. That's why Anandtech is the best site out there. Reply
  • davidlants - Friday, March 20, 2009 - link

    This is one of the best tech articles I have ever read, I created an account just to post this comment. I've been a fan of Anandtech for years and articles like this (and the RV700 article from a while back) show the truly unique perspective and access that Anand has that simply no other tech site can match. GREAT WORK!!! Reply
  • Zak - Friday, March 20, 2009 - link

    I just got the Apex. I'd probably cough up more dough for the Vertex after reading this. However, I've run it for two days as my system disk in MacPro and haven't noticed any issues, it's really fast. But I guess I'll get Vertex for my Windows 7 build.

    Z.
    Reply
  • Nemokrad - Friday, March 20, 2009 - link

    What I find intriguing about this article is that these smaller manufacturers do not do real world internal testing for these things. They should not need 3rd parties like you to figure this shit out for them. Maybe now OCZ will learn what they need to do for the future. Reply
  • JonasR - Friday, March 20, 2009 - link


    Thanks for an excellent article. I have one question does anyone know which controller is beeing used in the new Patriot 256GB V.3 SSD?
    Reply
  • tgwgordon - Friday, March 20, 2009 - link

    Anyone know if the Vertex Anand used had 32M or 64M cache? Reply
  • Dennis Travis - Friday, March 20, 2009 - link

    Excellent and informative article as always Anand. Thanks so much for posting the truth!! Reply
  • IsLNdbOi - Friday, March 20, 2009 - link

    Can't remember what page it was, but you showed some charts on the performance of SSDs at their lowest possible performance levels.

    At their lowest possible performance levels are they still faster than the 300GB Raptor?
    Reply
  • Edgemeal - Friday, March 20, 2009 - link

    It's too bad Windows and applications don't let you select where all the data that needs to be updated and saved to is stored. If that was an option a SSD could be used to only load data (EXE files and support files) and a HDD could be used to store files that are updated frequently, like a web browser for example, their constantly caching files, from the sound of this article that would kill the performance of a SSD in no time.

    Great article, I'll stick to HDDs for now.
    Reply

Log in

Don't have an account? Sign up now