New vs Used SSD Performance

We begin our look at how the overhead of managing pages impacts SSD performance with iometer. The table below shows iometer random write performance; there are two rows for each drive, one for “new” performance after a secure erase and one for “used” performance after the drive has been well used.

4KB Random Write Speed New "Used"
Intel X25-E   31.7 MB/s
Intel X25-M 39.3 MB/s 23.1 MB/s
JMicron JMF602B MLC 0.02 MB/s 0.02 MB/s
JMicron JMF602Bx2 MLC 0.03 MB/s 0.03 MB/s
OCZ Summit 12.8 MB/s 0.77 MB/s
OCZ Vertex 8.2 MB/s 2.41 MB/s
Samsung SLC 2.61 MB/s 0.53 MB/s
Seagate Momentus 5400.6 0.81 MB/s -
Western Digital Caviar SE16 1.26 MB/s -
Western Digital VelociRaptor 1.63 MB/s -

 

Note that the “used” performance should be the slowest you’ll ever see the drive get. In theory, all of the pages are filled with some sort of data at this point.

All of the drives, with the exception of the JMicron based SSDs went down in performance in the “used” state. And the only reason the JMicron drive didn’t get any slower was because it is already bottlenecked elsewhere; you can’t get much slower than 0.03MB/s in this test.

These are pretty serious performance drops; the OCZ Vertex runs at nearly 1/4 the speed after it’s been used and Intel’s X25-M can only crunch through about 60% the IOs per second that it did when brand new.

So are SSDs doomed? Is performance going to tank over time and make these things worthless?


"Used" SSD performance vs. conventional hard drives.

Pay close attention to the average write latency in the graph above. While Intel’s X25-M pulls an extremely fast sub-0.3ms write latency normally, it levels off at 0.51ms in its used mode. The OCZ Vertex manages a 1.43ms new and 4.86ms used. There’s additional overhead for every write but a well designed SSD will still manage extremely low write latencies. To put things in perspective, look at these drives at their worst compared to Western Digital’s VelociRaptor.The degraded performance X25-M still completes write requests in around 1/8 the time of the VelociRaptor. Transfer speeds are still 8x higher as well.

Note that not all SSDs see their performance drop gracefully. The two Samsung based drives perform more like hard drives here, but I'll explain that tradeoff much later in this article.

How does this all translate into real world performance? I ran PCMark Vantage on the new and used Intel drive to see how performance changed.

PCMark Overall Score New "Used" % Drop
Intel X25-M 11902 11536 3%
OCZ Summit 10972 9916 9.6%
OCZ Vertex 11253 9836 14.4%
Samsung SLC 10143 9118 10.1%
Seagate Momentus 5400.6 6817 - -
Western Digital VelociRaptor 7500 - -

 

The real world performance hit varies from 0 - 14% depending on the drive. While the drives are still faster than a regular hard drive, performance does drop in the real world by a noticeable amount. The trim command would keep the drive’s performance closer to its peak for longer, but it would not have prevented this from happening.

PCMark Vantage HDD Test New "Used" % Drop
Intel X25-M 29879 23252 22%
JMicron JMF602Bx2 MLC 11613 11283 3%
OCZ Summit 25754 16624 36%
OCZ Vertex 20753 17854 14%
Samsung SLC 17406 12392 29%
Seagate Momentus 5400.6 3525 -  
Western Digital VelociRaptor 6313 -  

 

HDD specific tests show much more severe drops, ranging from 20 - 40% depending on the drive. Despite the performance drop, these drives are still much faster than even the fastest hard drives.

Simulating a Used Drive SSD Aging: Read Speed is Largely Unaffected
POST A COMMENT

235 Comments

View All Comments

  • Hrel - Thursday, April 09, 2009 - link

    Instead of making me dinner can you send me that test system instead??? Please!!! Reply
  • Hrel - Thursday, April 09, 2009 - link

    I was wondering what controller the OCZ solid Series is based on??? Will I experience hiccups with that drive or not? Is the point of my question. Reply
  • sfisher64 - Wednesday, April 08, 2009 - link

    I just purchased a Dell Latitude E6400 with a 64GB Ultra Performance Solid State Drive. Does anyone know what type of drive this is, and where it fits in the spectrum described in this article? Reply
  • Baffo - Saturday, April 11, 2009 - link

    The Dells use the Samsung drives (you should see this on the bottom if you pull it out). However, as much as I wish this was one of the newer controllers (I have a few of these at work as well), the testing cycles demanded by Dell probably mean these are the older controllers. Reply
  • marraco - Tuesday, April 07, 2009 - link

    This article is popular :) Reply
  • BLHealthy4life - Monday, April 06, 2009 - link

    Intel 9.1.1.1010 (Intel) Where are these drivers? I can only find version 1007 and not 1010....

    Thanks
    Reply
  • BLHealthy4life - Sunday, April 12, 2009 - link

    found it....

    Intel obviously keeps the X58 chipset drivers current for their own boards, just not other mfgs boards....

    They installed fine on my R2E..

    BL
    Reply
  • irondukes - Friday, April 03, 2009 - link

    Hi-- Do SLCs suffer from performance degradation, or are the controllers pretty agressive at erasing the data since they have far longer read-write cycles? Please help! Deciding between an X25E and X25M Reply
  • mdavies - Friday, April 03, 2009 - link

    I'm reading this about a day late - got my Patriot PE256GS25SSDR 2.5" 256GB yesterday since I'm bad about destroying hard drives. this drive, in a word, was excruciating. I'll be replacing it with one of your recommended drives today.

    Thanks
    Reply
  • sotoa - Friday, April 03, 2009 - link

    Long time reader, first time post.
    I really liked the background story and appreciate how Anand delves deep into the the SSD's (as well as other products in other articles).

    Thanks for looking out for the little guy!
    Keep up the great work!
    Reply

Log in

Don't have an account? Sign up now