New vs Used SSD Performance

We begin our look at how the overhead of managing pages impacts SSD performance with iometer. The table below shows iometer random write performance; there are two rows for each drive, one for “new” performance after a secure erase and one for “used” performance after the drive has been well used.

4KB Random Write Speed New "Used"
Intel X25-E   31.7 MB/s
Intel X25-M 39.3 MB/s 23.1 MB/s
JMicron JMF602B MLC 0.02 MB/s 0.02 MB/s
JMicron JMF602Bx2 MLC 0.03 MB/s 0.03 MB/s
OCZ Summit 12.8 MB/s 0.77 MB/s
OCZ Vertex 8.2 MB/s 2.41 MB/s
Samsung SLC 2.61 MB/s 0.53 MB/s
Seagate Momentus 5400.6 0.81 MB/s -
Western Digital Caviar SE16 1.26 MB/s -
Western Digital VelociRaptor 1.63 MB/s -

 

Note that the “used” performance should be the slowest you’ll ever see the drive get. In theory, all of the pages are filled with some sort of data at this point.

All of the drives, with the exception of the JMicron based SSDs went down in performance in the “used” state. And the only reason the JMicron drive didn’t get any slower was because it is already bottlenecked elsewhere; you can’t get much slower than 0.03MB/s in this test.

These are pretty serious performance drops; the OCZ Vertex runs at nearly 1/4 the speed after it’s been used and Intel’s X25-M can only crunch through about 60% the IOs per second that it did when brand new.

So are SSDs doomed? Is performance going to tank over time and make these things worthless?


"Used" SSD performance vs. conventional hard drives.

Pay close attention to the average write latency in the graph above. While Intel’s X25-M pulls an extremely fast sub-0.3ms write latency normally, it levels off at 0.51ms in its used mode. The OCZ Vertex manages a 1.43ms new and 4.86ms used. There’s additional overhead for every write but a well designed SSD will still manage extremely low write latencies. To put things in perspective, look at these drives at their worst compared to Western Digital’s VelociRaptor.The degraded performance X25-M still completes write requests in around 1/8 the time of the VelociRaptor. Transfer speeds are still 8x higher as well.

Note that not all SSDs see their performance drop gracefully. The two Samsung based drives perform more like hard drives here, but I'll explain that tradeoff much later in this article.

How does this all translate into real world performance? I ran PCMark Vantage on the new and used Intel drive to see how performance changed.

PCMark Overall Score New "Used" % Drop
Intel X25-M 11902 11536 3%
OCZ Summit 10972 9916 9.6%
OCZ Vertex 11253 9836 14.4%
Samsung SLC 10143 9118 10.1%
Seagate Momentus 5400.6 6817 - -
Western Digital VelociRaptor 7500 - -

 

The real world performance hit varies from 0 - 14% depending on the drive. While the drives are still faster than a regular hard drive, performance does drop in the real world by a noticeable amount. The trim command would keep the drive’s performance closer to its peak for longer, but it would not have prevented this from happening.

PCMark Vantage HDD Test New "Used" % Drop
Intel X25-M 29879 23252 22%
JMicron JMF602Bx2 MLC 11613 11283 3%
OCZ Summit 25754 16624 36%
OCZ Vertex 20753 17854 14%
Samsung SLC 17406 12392 29%
Seagate Momentus 5400.6 3525 -  
Western Digital VelociRaptor 6313 -  

 

HDD specific tests show much more severe drops, ranging from 20 - 40% depending on the drive. Despite the performance drop, these drives are still much faster than even the fastest hard drives.

Simulating a Used Drive SSD Aging: Read Speed is Largely Unaffected
POST A COMMENT

243 Comments

View All Comments

  • KadensDad - Tuesday, October 27, 2009 - link

    How do these drives fail? I have heard that they will just suddenly die, no more writes or reads possible. What I would like to know is what happens when it dies? Do you lose all data? Just can't write anymore? How does the OS respond? Any early warnings? What about e.g. CRC? How does possibility of data corruption compare to traditional SSD? What about RAID? Since the drives are electrical, not mechanical, this reduces the number of failure vectors and environmental concerns (e.g., ambient temperature over lifetime of the drive). Won't SSDs therefore fail closer together in time in a RAID configuration? This reduces the window of opportunity for fixing an array and also decreases the applicability of RAID, however marginal.
    Reply
  • Dewend - Friday, March 04, 2016 - link

    My partner and i also were seated for lunch, whenever i mentioned to her that I read a script each and every morning newspaper, therefore i chosen to do a little research. Thankfully, I stumbled upon this website, which helped me discover why people consider even thinking about this. http://followersteam.com Reply
  • jackeyroe - Friday, April 22, 2016 - link

    Great, that what you said I agree and I think that all your opinion are nice and smart for me. If you want any sports shoes you can feel free to my website and I will share you coupon code. And for your this opinion of SSD might I know that is it possible for my website, if it is possible I will try to find is there any more tips that could improve all the functions of my sports shoes site. If it works then will be my pleasure and I will share the great article to all my kind friend, they will be happy to share it into the network of them. Would you please take a look to my website firstly:
    http://www.kicksvovo.com/
    Reply
  • davidsmith123 - Thursday, July 07, 2016 - link

    That sure was a lot to take in! Fantastic article though, it has really opened my eyes to the possibilities that Solid State Drives provide. Probably wont be buying one in the immediate future given the so-called depression and such things, but i will certainly keep up with SSD progress.
    Thanks again for your fantastic articles - im sure im not the only one who really appreciates them :)
    http://www.hubnames.com/
    Reply
  • Rahul Ji - Sunday, August 21, 2016 - link

    Dear KadensDad, these drivers fail all the time. With the new technology and new softwares coming , everyday some drivers and some softwares go outdated. This ought to happen. But, what will not go outdated is our Microsoft xbox live codes at http://xbcodejunction.com . These codes work anywhere anytime, anybody can use them. Just so easy to get and use. So come and try your copy for free. Reply
  • adsmith82 - Monday, September 14, 2009 - link

    I need to run HDDErase on an X25-M. No matter what bootable CD or flash drive I create, HDDErase does not see either of my SATA hard drives. I already disabled AHCI in BIOS. Also, I am using version 3.3. I know that 4.0 does not work with the X25-M.

    Can someone help me troubleshoot this please? Thanks.
    Reply
  • gallde - Thursday, June 11, 2009 - link

    You point out that TRIM will only work on deletions, not on overwrites. But, couldn't a smart controller look at blocks that have a majority of invalid pages and "trim" them as well, recovering clean pages as a background process? Reply
  • forsunny - Thursday, August 13, 2009 - link

    Why not just make the SSDs capable of individual page erases instead of blocks? Problem solved. Reply
  • Ron White - Sunday, August 31, 2014 - link

    Erasing the NAND transistor in an SSD requires such a large jolt of voltage that it would affect surrounding transistors. Reply
  • lyeoh - Friday, May 29, 2009 - link

    Good and informative article.

    Regarding the shill tshen83 who claims that Anandtech cost the drive manufacturers millions of dollars in sales.

    If that is true, Anandtech has saved customers millions of dollars.

    Anandtech should care more about their readers losses than drive manufacturer losses. If Anandtech was a site for drive manufacturers and their shills we wouldn't be reading it.

    To me, if the SSD drive manufacturers lose money, it's their own fault for building crap that has higher write latencies than old fashioned drives with metal discs spinning at 7200RPM or slower. Not anandtech's.

    I can get higher sequential reads and writes by using RAID on old fashioned drives. It is much harder to get lower latency. So Anandtech did the right thing for OCZ.

    Lastly, there might be a way of making your windows machine stutter less even with a crap SSD. Note: I haven't tested the actual effect on an SSD because I don't have an SSD.

    Basically by default when Windows accesses a file on NTFS, it will WRITE to the directory the time of the access. Yep, it writes when it opens files and directories (which are just special files). That might explain the stuttering people see. For a lot of things, Windows has to open files.

    Warning! There are reasons why some people or programs would want to know the last access time of files. Me and my programs don't (and I doubt most people would).

    If you are sure that's true for you (or are willing to take the risk) set NtfsDisableLastAccessUpdate=1 as per:

    http://technet.microsoft.com/en-us/library/cc75856...">http://technet.microsoft.com/en-us/library/cc75856...
    Reply

Log in

Don't have an account? Sign up now