Enter the 32nm Lineup

Instead of Havendale in Q4, we’ll get Clarkdale and Arrandale. These are both dual-core, quad-thread processors, and both have on-package graphics. The CPU cores will be built on Intel’s 32nm process and in fact, they will be the first Westmere CPUs shipping into the market.

Now note that the dual-core market is the largest slice of the processor pie. Intel must be incredibly confident in its 32nm process to start shipping it into these demand markets first. Remember that both 65nm and 45nm initially launched on the high end desktop, but 32nm is making its debut in mainstream notebooks and desktops. The 32nm ramp is going to be a good one folks.

Segment Manufacturing Process Socket Processor Cores Threads Release Date
High End Desktop 32nm LGA-1366 Gulftown 6 12 1H 2010
Mainstream Desktop 32nm LGA-1156 Clarkdale 2 4 Q4 2009
Mobile 32nm mPGA-989 Arrandale 2 4 Q4 2009
4S Server 32nm LGA-1567 ??? ? ? 2010
2S Server 32nm LGA-1366 ??? ? ? 2010
1S Server 32nm LGA-1156 Clarkdale 2 4 2010

 

Clarkdale/Arrandale have 32nm CPUs but their on-package GPUs are still built on Intel’s 45nm process; these are the GPUs that were supposed to be used for Havendale! It won’t be until 2010 with Sandy Bridge that we see a 32nm CPU and 32nm GPU on the same package.

A side effect of the Clarkdale/Arrandale architecture is that the memory controller is now located on the GPU and not the CPU, although both are still on package and should still be quite low latency.

Keep following; if you want a quad-core Westmere, your only option will be in the LGA-1366 socket with Gulftown. Core i7 will get replaced with a six-core, twelve-thread processor in early 2010. There won’t be a 32nm quad-core part on the desktop until the end of 2010 with Sandy Bridge.

Tick-Tock: U R Doin it Right The Server Roadmap & Chipsets
Comments Locked

64 Comments

View All Comments

  • blyndy - Wednesday, February 11, 2009 - link

    Let me see if I've got this straight: in 2H'09 (I would actually bet Q3'09) we will finally see the Core i5 quads-cores (Lynnfield/Clarksfield) (on a new LGA-1156 socket), which should have been released in Dec'08.

    So the 45nm Core i5 quads will be the highest performing CPU available for LGA-1156, positioning above the 32nm Clarkdale/Arrandale dual-cores (the 'Core i5 Duo' maybe?) which arrive in Q4'09

    How do they indent to make the LGA-1366 platform have better overclockability, i7 and i5 are almost the same, are they going to actively prevent OC'ing on i5? that would be ridiculous.

    Somehow I don't think that the artificial socket segmentation will have a significant number of enthusiast herded into LGA-1366 to get the higher margin cash-cow that Intel has planned it to be.
  • Triple Omega - Sunday, February 15, 2009 - link

    Intel isn't going to artificially limit overclocking directly, but it is indirectly by redirecting the better chips to 1366. So the i7 CPU's will be cherry-picked versions of the i5's and thus will overclock better. Besides that the only socket with Extreme versions will be 1366.(Though that is a niche within a niche really)
  • philosofool - Wednesday, February 11, 2009 - link

    Overclockers are a very small fraction of the market. I'm not even sure intel is thinking about overclockability when they engineer chips. Overclockability is more an artefact of good engineering than a design goal from the outset. Overclockers are always paranoid that intel or AMD is out to get them by intentionally crippling chips. There just aren't enough of us for Intel to be concerned. We're like 1% of the total CPU market.

    Pretty much every chip that intel has released at any price point since the introduction of Core 2 has been wonderfully overclockable. I wouldn't worry that Intel is going to change that soon, especially since Core i5 is basically just mainstream processor with the same design fundamentals as the excellent i7.
  • JonnyDough - Wednesday, February 11, 2009 - link

    Although I understand it's a hobby, I don't care if people can overclock or not. As long as we have fast chips at a good price and they're faster than what we have...I mean, why would you care? Isn't it all about SPEED?
  • ssj4Gogeta - Wednesday, February 11, 2009 - link

    i5 probably won't have an extreme version.
  • Bezado11 - Wednesday, February 11, 2009 - link

    I wouldn't be surprised if the opposite was true. I'm really sick of all the hype on shrinking creates less heat. Look at the gpu industry, ever since they started shrinking things got hotter and hotter, and now it seems with i7 even though it's not a die shrink and we are use to 45nm by now, the new hardware to support minor changes in architecture of the cpu seem to make things run hotter.

    I7 is way to hot. The newest GPU's run way to hot.
  • Lightnix - Thursday, February 12, 2009 - link

    But you're making an unfair comparison - for example, the current latest GPUs have only been produced on the newest nodes, ever. Now, if we take for example, a Radeon 3870 vs. a Radeon 2900 XT, the former draws far less power and will overclock better on air, almost directly as a result of them shrinking from a 80nm to a 55nm process, despite them performing exactly the same. Another example is the Core 2 E8000 series and E6000 series. Despite the increase in cache size, the E8000 dissipates little enough heat that they can provide them with a very tiny heatsink compared to the earlier 65nm cores, and objectively they draw much less power at the same clock speed because they run at lower volts.

    You can see this sort of thing again and again throughout the technology industry, Coppermine (180nm) -> Tualatin(130nm), GeForce 7800 -> 7900, G80 -> G92, etc., etc.

    If you were to compare say, a GTX280 to a 8800 GTX and say the former draws much more power than the 8800 GTX, AND it's produced on a smaller process - well, yes, but that's because they've clocked it higher and there are far more transistors (twice as many, in fact).
  • Mr Perfect - Thursday, February 12, 2009 - link

    That's because every time they shrink the chips they pack in new features and push the clock speed to the bleeding edge. If all they did was die shrink the old tech, we'd all be running something like an Atom CPU right now. Atoms closely resemble Pentium 3s, but on modern manufacturing only draw what? 5 watts?
  • V3ctorPT - Wednesday, February 11, 2009 - link

    The GPU's run hotter, because they pack double the transistors with a new shrink, than their previous HW... Reduction of the manufacturing process enables that we can have so much more transistors in the same place, of course it gets hot...
  • JonnyDough - Wednesday, February 11, 2009 - link

    I think you need to re-read the manufacturing roadmap page. It details the leakage gain (heat).

Log in

Don't have an account? Sign up now