Final Words

There is not a perfect IGP at this time. Maybe the upcoming NVIDIA Intel chipsets will change our opinion - though not completely, as the product is evolutionary rather revolutionary. This is not to slight the product before the official announcement; it's just we think something revolutionary should contain features or provide performance that is not available in today's chipsets. When thinking about the perfect IGP solution, we have several ideas.

We would like AMD HD 4670 video performance along with 8-channel HDMI audio output that not only offers LPCM capability but the ability to bitstream Dolby True HD and DTS-MA HD audio formats. 1080P/24 fps playback that just works would be exciting, as would not having to utilize third party programs to configure EDID information to get various monitors and chipsets to work together. A single chip solution in a low-power design that supports quad-core (for video/audio encoding duties) processors and is ITX friendly is something we would drool over. Of course, we want it today.

While there are numerous ideas on the hardware side, we think an even more important aspect of our perfect IGP solution is stable, bug-free, and optimized driver support to bring all of this together. We have had our fill of half-baked driver sets, features promised but never delivered, and enough incompatibilities at launch to make one wonder if anyone remembered to check if the hardware and software actually work together before shipment.

As for the chipsets we looked at today, it is difficult to declare a true winner at this time, especially given the fact that the new NVIDIA chipsets are launching shortly. However, if we had to choose one chipset for primary HTPC usage, it would be the NVIDIA GeForce 8200. The GF8200 offers 8-channel LPCM output, no hassle 1080P/24 fps playback capabilities, modest pricing, and a relatively low power envelope when paired with an appropriate processor such as the Phenom X3 8750 or Phenom X4 9350e.

This is a difficult decision as the AMD 780G is a better balanced chipset offering improved casual gaming performance, equal video quality, similiar power requirements, greater availability, and better pricing. The performance of certain 780G motherboards can equal or nearly match those of the 790GX with some creative mGPU overclocking, and most models come in a space saving uATX form factor. Also, depending on the motherboard, DVI-D dual-link is supported with resolutions going to 2560x1600, something the GF8200 and G45 do not support.

The drawback for us is the lack of multi-channel LPCM HDMI audio output and not so great 1080P/24 fps playback capabilities. If these items are not important to you, then the 780G would probably be at the top of our list. Of course, these problems can be solved with an inexpensive HD 4550 or HD 4670 video card but that completely throws off the price advantage over the Intel platform; however, you end up with a significantly improved platform offering balanced performance for the HTPC, casual gamer, or SOHO user.

That leaves the Intel G45. If you are an Intel fan, this is your only real IGP choice... for the next few days at least. The G45 is acceptable for an HTPC platform as it offers excellent video quality and 8-channel LPCM output. However, we have no idea if implementation of 1080P/24 fps support will occur. Speaking of driver quality and features, this is one area where Intel is behind AMD and NVIDIA. In addition, platform cost is a problem when looking at the mid to lower range processor market compared to AMD. This is something we will look at shortly as it pertains to the IGP market.

As for the motherboards we tested for this overview article, the Zotac GF8300 offered very good stock performance but is a no-frills board with a layout that we would like to see improved. Their GF8200 version of this board just hit the retail market for under $70 and we suggest you take a look at it if the items we discussed are not a deal breaker. Zotac builds a high quality budget board with excellent stability; it’s just not flashy or exciting.

The Biostar TF-8200 A2+ is a feature rich ATX board that offers excellent stability, compatibility, and performance for the price. There are a couple of minor problems that are BIOS related and we hope Biostar offers a new BIOS soon. Otherwise, consider this board when looking at other GF8200 alternatives.

The ASRock A780GXE/128M is a unique product offering. Based on an ATX form factor this board offers a BIOS designed for overclocking and a feature set that puts it in direct competition with the more expensive 790GX motherboards. To date, the board has provided very good performance, stability, and compatibility with a wide range of peripherals.

There is stiff competition in the IGP sector between ASUS, MSI, Gigabyte, Biostar, ASRock, Jetway, ECS, and others. We will be back shortly to look at further 780G/GF8200/790GX offerings along with budget discrete GPU comparisons. We might even have time after that to show the performance differences between 10 different CPUs on these platforms. Before then, we have a new chipset in the market that NVIDIA will be offering shortly....

AMD 780G: ASRock A780GXE/128M
Comments Locked

41 Comments

View All Comments

  • tonyintoronto - Wednesday, October 15, 2008 - link

    The issue is the 780G just doesn't work well enough to be used in htpc.. tons of issues with hdcp and different monitors/tv's, still can't decode mpeg2 stream without crashing the display driver, issues with open GL, was a great idea but bad drivers/hardware have done it for me.. now, the 9300 and 9400 looking nice :)
  • Mathos - Tuesday, October 14, 2008 - link

    Hmmmmm Actually the power numbers aren't too bad when you take it into context. Q9300 is a 45nm chip, and 9950 is 65nm. Q9300 is 95w TDP rated, but runs much lower actual TDP. While the 9950 is rated 125w TDP. I'd be interested in seeing this test redone once Deneb variants come out. Considering the lesser performance of the Phenom compared to the Penryn, it actually speaks well of both the AMD based chipsets, and shows that the 790GX does a lot to make up for the processor.

    I'd say AMD/ATI are doing a good job on the Chipset front now.
  • Calin - Tuesday, October 14, 2008 - link

    Also, considering we're talking about a $174 versus a $260 processor. I wonder what the results were if the comparation would have been against the quad core Q6600 (at a somewhat similar price of $189).
  • 3DoubleD - Tuesday, October 14, 2008 - link

    "However, they are offering 8-channel LPCM support on the HD 4xxx series of video cards. Of course that option comes with an additional cost and potential problems such as incompatibility with AVR receivers such as those from Yamaha"

    Can you elaborate on these problems? I was planning on building an HTPC system and was considering this exact combination. Are these temporary (driver update solvable) problems?

    This second question is only distantly related to this article. When using the HDMI with LPCM audio, will sound from sources other than Blu-ray discs (such as games or movies with DD5.1 or DTS) be playable on your stereo? Part of me wants to say yes it will for DTS and DD5.1, but I'm skeptical about video games for some reason. I guess I don't fully understand the extent of the sound card capabilities on these IGP/discrete graphics solutions.

    Great article, I'm looking forward to your HTPC graphics card review.
  • AmdInside - Tuesday, October 14, 2008 - link

    I own the Asus M3N-H/HDMI (Geforce 8300) and except for the fact that it doesn't have an eSATA port, I have no complaints (well, maybe the placement of the 24-pin power connector).

    http://www.asus.com/products.aspx?modelmenu=1&...">http://www.asus.com/products.aspx?model...mp;l1=3&...

    I recently purchased the Intel G45 Mini-ITX motherboard to build a second HTPC and although it has worked ok for the most part, BD and HD-DVD playback just doesn't seem as smooth as the Geforce 8300. It is not choppy. It just feels like the framerate is lower. I can't explain why. The same HDTV was used with both systems and they were both set to 1080p/60. Both systems are running Windows Vista. If you are building a new HTPC, I would not recommend Windows XP btw with these platforms. Anyways, I appreciated the article. For me, I was trying to build a somewhat portable HTPC with the Intel mini-ITX motherboard but given the problems I am having with BD and HD-DVD playback, I think I am going to leave it as a Windows Media Center DVR box and use the Geforce 8300 as my main HTPC. For what it's worth, I tested with both WinDVD and Arcsoft TMT.
  • gipper - Tuesday, October 14, 2008 - link

    It sounds to me like you're really recommending that at this time the way to go is to get a cheap Intel chipset motherboard with the cheapest, lowest power 45nm Core2 Duo, and an ATI 4550.

    But what Intel chipset would give that rock solid platform at the lowest price?
  • tayhimself - Tuesday, October 14, 2008 - link

    Neither AMD nor Nvidia can make a decent chipset. Intel seems to have as many misses as they have hits so they're usually a good bet. Boo hiss to poor QC!
  • Nil Einne - Friday, January 30, 2009 - link

    As with others, I have to say this is a piss poor review. I looked at the Part 1 and came across a resonably decent review. Was expecting the same thing here. But what do I come across? You onmly test two quad cores. What idiot buys a quad core for their HTPC? Unless you're transcoding there's absolutely no reason and given the price of HDs nowadays and the fact that some broadcasters are using AVC for their HD content anyway there's only a few people who are going to bother. Even if you are occasionally transcoding, it's questionable of you really need a quad core or it might be better to just stick with a dual. At the very lest you could have tested quad cores and dual cores like you did with the previous review. But you didn't and so have a fairly useless review for 99% of the population. Why did you even bother with gaming anyway? Seriously, how many people game with quad core IGP systems particularly the kind of games you were testing. And how many of those check out Anandtech reviews? Maybe 5 people in the whole world... You may use a quad core IGP for a high load server or a non-3D workstation but not gaming.

    As it stands, based on your previous review (part 1, i.e. the one with the G35) and your comparison between the G35 and G45 I'm guessing that the 8200 is probably still better when paired with a decent CPU for most HTPC purposes but only barely. Sadly it's just a guess for the reasons I outlined above
  • Nil Einne - Friday, January 30, 2009 - link

    When I said part 1 I meant the "IGP Power Consumption - 780G, GF8200, and G35", got slightly confused. One of the strangest things about this review of course is the 8200 performed so poorly whereas in that review, it was better then the 780G. Has the 780G improved a lot? Is it just the Gigabute 780G was a POS? Who knows, one would have thought the reviewer would have at least co=mmented on if not investigated this but apparently not
  • lisajack - Saturday, January 18, 2020 - link

    Although, with MMA corner standards, I wouldn’t be surprised if somebody told her to go out there and do her best despite being completely out(weight)classed by the scale.<a href="https://www.nogibjjgear.com/collections/rash-guard... guards</a>

Log in

Don't have an account? Sign up now