Overclocking

You have already seen that the Core 2 Extreme X6800 outperforms AMD's fastest processor, the FX-62, by a wide margin.  This is exacerbated by the fact that the $316 E6600, running at 2.4GHz, outperforms the FX-62 in almost every benchmark we ran.  That certainly address the questions of raw performance and value.

For most enthusiasts, however, there is also the important question of how Core 2 processors overclock.  As AMD has moved closer to the 90nm wall, recent AM2 processors do not have much headroom.  A prime example is the FX-62, which is rated at 2.8GHz, reaches 3GHz with ease, but then has a difficult time reaching or passing 3.1GHz on air.  So how does Core 2, built at 65nm, compare in overclocking?

The top X6800 is rated to run at 11X multiplier on a 1066MHz FSB; it is the only Core 2, however, that is completely unlocked, both up and down.  You can adjust multipliers up to 60 on the Asus P5W-DH motherboard, or down to 6.  This makes the X6800 an ideal CPU for overclocking, even though top-line processors are normally notorious for not being the best overclockers.

To gauge the overhead or overclocking abilities of the X6800 in the simplest terms, the CPU speed was increased, keeping the CPU voltage at the default setting of 1.20V.


Click to Enlarge

At default voltage the X6800 reached a stable 3.6GHz (13 x277).  This is a 23% overclock from the stock 2.93GHz speed at stock voltage.  It is also an important overclocking result, since it implies Intel could easily release a 3.46GHz or 3.6GHz Core 2 processor tomorrow if they chose to.  It is clear there is no need for these faster Core 2s yet, but it does illustrate the speed range possible with the current Core 2 Duo architecture.

The X6800 was then pushed to the highest CPU speed we could achieve with Air Cooling.  We did use a very popular and effective air cooler for our testing, the Tuniq Tower.

The goal was to reach the highest possible speed that was benchmark stable.  Super Pi, 3DMarks, and several game benchmarks were run to test stability. The 2.93GHz chip reached 4.0GHz on air cooling in these overclocking tests.  That represents a 36% overclock on air with what will likely be the least overclockable Core 2 processor - the top line X6800.

To provide some idea of overclocking abilities with other Core 2 Duo processors, we ran quick tests with E6700 (2.67GHz), and E6600 (2.4GHz).  The test E6700 reached a stable 3.4GHz at default voltage and topped out at 3.9GHz with the Tuniq Cooler.  The 2.4GHz E6600 turned out to be quite an overclocker in our tests.  Even though it was hard-locked at a 9 multiplier it reached an amazing 4GHz in the overclocking tests.  That represents a 67% overclock. 


Click to Enlarge

We had another Core 2 Extreme X6800 that we tried overclocking with a stock Intel HSF. The results were not as impressive as with the Tuniq cooler, with 3.4GHz being the most stable we could get it. We're going to be playing around with these processors more in the future to hopefully get a better overall characterization of what you can expect.

Curious about our overclocking successes, we asked Intel why Core 2 CPUs are able to overclock close to the same levels as NetBurst processors can, despite having less than half the pipeline length. Intel gave us the following explanation:

NetBurst microarchitecture is constrained by physical power / thermal limitations long before the constraint of pipeline stages comes into play. The microarchitecture itself would continue to scale upwards if not for the power constraints. (In fact, we have seen Presler overclocked to 6 GHz in liquid nitrogen environments. At that level, power delivery through the power supply & board itself begin to limit further scaling of the processor.)

Intel's explanation makes a great deal of sense, especially when you remember the original claims that NetBurst was supposed to be good for between 5GHz - 10GHz. NetBurst never got the chance to reach its true overclocking prime as Intel hit thermal density walls well before the 5GHz - 10GHz range and thus Intel's Core architecture was born. Intel's Core 2 processors once again give us an example of the good ol' days of Intel overclocking, where moving to a smaller manufacturing process meant we'd have some highly overclockable chips on our hands. With NetBurst dead and buried, the golden age of overclocking is back.

Enthusuasts have not seen overclocking like this since Socket 478 days, and in fact Core 2 may be even better.  The 2.4GHz E6600, which outperformed the FX-62 in most benchmarks at stock speed costs $316, and overclocked to 4Ghz with excellent air cooling.  With that kind of performance, value, and overclocking the E6600 will likely become the preferred chip for serious overclockers - particularly those that are looking for champagne performance on a smaller budget.

It is important, however, not to sell the advantages of the X6800 short.  AnandTech never recommends the fastest chip you can buy as a good value choice, but X6800 does bring some advantages to the table.  It is the only Conroe that is completely unlocked.  This allows settings like 266(stock FSB)x15 for 4.0GHz, settings that keep other components in the system at stock speed.  This can only be achieved with the X6800 - other Core 2 Duo chips are hard-locked - and for some that feature will justify buying an X6800 at $999.  For the rest of us overclockers E6600 is shaping up to be the chip to buy for overclocking.

CPU Bound Gaming Performance Final Words
POST A COMMENT

200 Comments

View All Comments

  • defter - Friday, July 14, 2006 - link

    Xbitlabs has a great E6300 review:
    http://www.xbitlabs.com/articles/cpu/display/core2...">http://www.xbitlabs.com/articles/cpu/display/core2...

    Overclocking was limited by a motherboard, but they still managed to achieve 2.94GHz with 420MHz FSB, not bad from a <$200 chip. E6300@2.94GHz was way faster than Athlon64X2@3GHz.
    Reply
  • Frackal - Friday, July 14, 2006 - link

    4ghz Conroe, holy shiat Reply
  • AndrewChang - Friday, July 14, 2006 - link

    Loved the title, and loved the article. Can't wait till the Return of the Jedi... Reply
  • JackPack - Friday, July 14, 2006 - link

    Jedi is considered to be weakest film of the three.... Reply
  • formulav8 - Friday, July 14, 2006 - link

    Yeah, but the Emperor WAS overthrown. :)

    Anyways, good job on the review. Intel is definitely trying to almost GIVE those PD cpu's away it seems. $93? Not that I don't blame them. They would almost HAVE to give them away to get rid of them.



    Jason
    Reply
  • haugland - Friday, July 14, 2006 - link

    Page 18:
    quote:

    The 2.4GHz E6600, which outperformed the FX-62 in most benchmarks at stock speed costs $223, and overclocked to 4Ghz with excellent air cooling


    According to the prices on page 2, the price for the 2.4GHz E6600 is $316, while the 2.13Ghz E6400 costs $224.
    Reply
  • mobutu - Friday, July 14, 2006 - link

    I quote:

    "The 2.4GHz E6600, which outperformed the FX-62 in most benchmarks at stock speed costs $223, and overclocked to 4Ghz with excellent air cooling"

    It costs $316 according to Intel charts. Please fix it.
    10x
    Reply
  • JarredWalton - Friday, July 14, 2006 - link

    Fixed (also for post below). Reply
  • mi1stormilst - Friday, July 14, 2006 - link

    I was like skimming throught the article and thinking to myself wow. Then I went back and looked at the benchmarks and realized that until I see benchmarks with a wider range of video card and cpus I will reserve my excitement. At the moment my $120.00 used 3200 venice running at 2600MHZ with an X1800XL gives me some very good performance. Reply
  • JarredWalton - Friday, July 14, 2006 - link

    I http://www.anandtech.com/guides/showdoc.aspx?i=279...">looked at performance with several CPUs using a 7600 GT (slower than X1800XL, but not by a huge amount). Basically, on lower end GPUs you will be GPU limited and just about any fast CPU. Maybe not always with NetBurst, but K8 and Core2 will be more than sufficient for all but multi-GPU setups (until next gen GPUs arrive). Reply

Log in

Don't have an account? Sign up now