It’s almost like we say this every year, but Computex hasn’t even officially started yet and we already have a lot to talk about.  Everything from the power requirements of next year’s GPUs from ATI and NVIDIA to the excitement surrounding Intel’s Conroe launch is going to be covered in today’s pre-show coverage so we’ll save the long winded introduction and get right to business. 

We will first address some of the overall trends we’ve seen while speaking to many of the Taiwanese manufacturers and then dive into product specific items.  We’ll start with the most shocking news we’ve run into thus far - the power consumption of the next-generation GPUs due out early next year.

DirectX 10 GPUs to Consume up to 300W

ATI and NVIDIA have been briefing power supply manufacturers in Taiwan recently about what to expect for next year’s R600 and G80 GPUs.  Both GPUs will be introduced in late 2006 or early 2007, and while we don’t know the specifications of the new cores we do know that they will be extremely power hungry.  The new GPUs will range in power consumption from 130W up to 300W per card. ATI and NVIDIA won't confirm or deny our findings and we are receiving conflicting information as to the exact specifications of these new GPUs, but the one thing is for sure is that the power requirements are steep.

Power supply makers are being briefed now in order to make sure that the power supplies they are shipping by the end of this year are up to par with the high end GPU requirements for late 2006/early 2007.  You will see both higher wattage PSUs (1000 - 1200W) as well as secondary units specifically for graphics cards.  One configuration we’ve seen is a standard PSU mounted in your case for your motherboard, CPU and drives, running alongside a secondary PSU installed in a 5.25” drive bay.  The secondary PSU would then be used to power your graphics cards. 

OCZ had one such GPU power supply at the show for us to look at. As you can see above, the 300W power supply can fit into a 5.25" drive bay and receives power from a cable passed through to it on the inside of your PC's case.

OCZ is even working on a model that could interface with its Powerstream power supplies, so you would simply plug this PSU into your OCZ PSU without having to run any extra cables through your case.

In order to deal with the increased power consumption of this next-generation of DirectX 10 GPUs apparently manufacturers are considering the possibility of using water cooling to keep noise and heat to a minimum.

As depressing as this news is, there is a small light at the end of the tunnel.  Our sources tell us that after this next generation of GPUs we won’t see an increase in power consumption, rather a decrease for the following generation.  It seems as if in their intense competition with one another, ATI and NVIDIA have let power consumption get out of hand and will begin reeling it back in starting in the second half of next year. 

In the more immediate future, there are some GPUs from ATI that will be making their debut, including the R580+, RV570 and RV560.  The R580+ is a faster version of the current R580, designed to outperform NVIDIA’s GeForce 7900 GTX.  The RV570 is designed to  be an upper mid-range competitor to the 7900GT, possibly carrying the X1700 moniker.  The only information we’ve received about RV570 is that it may be an 80nm GPU with 12-pipes.  The RV560 may end up being the new successor to the X1600 series, but we haven’t received any indication of specifications. 

After the HDMI/HDCP fiasco that both ATI and NVIDIA faced earlier this year, we’re finally seeing video cards equipped with HDMI outputs and full HDCP support.  The HDCP solution of choice appears to be a TMDS transmitter by Silicon Image that has found its way onto almost all of the HDMI equipped video cards we’ve seen. 

While some of the HDMI equipped graphics cards simply use the HDMI output as a glorified DVI connector, other companies have outfitted their designs with a SPDIF header to allow for digital audio passthrough over HDMI as well.  Remember that the HDMI connector can carry both audio and video data, and by outfitting cards with a header for internal audio passthrough (from your soundcard/motherboard to the graphics card) you take advantage of that feature of the HDMI specification.

Alongside HDMI support, passively cooled GPUs are “in” these days as we’ve seen a number of fanless graphics cards since we’ve been here.  The combination of HDMI output and a passive design is a definite winner for the HTPC community, who are most likely to be after a video card equipped with a HDMI output at this point. 

Conroe Motherboards Arrive
POST A COMMENT

58 Comments

View All Comments

  • lopri - Tuesday, June 06, 2006 - link

    quote:

    Unfortunately due to changes in the VRM requirements for Conroe, no current LGA-775 motherboards will work with the new processor.


    Riiiiiiiiiiiiiiiiiight. I thought the next gen Intel chips are supposed to consume less power? I admit that I'm ignorant when it comes to such things, but the common sense tells me that VRM which supports TDP 130 should have no problem handling TDP 80? Could anyone elaborate?
    Reply
  • DigitalFreak - Tuesday, June 06, 2006 - link

    It happens every time Intel releases a new CPU. The then current chipset will support the CPU, but then the "VRM issue" pops up. It's a scam by Intel to force you to buy a new motherboard (preferrably with their chipset, of course). AMD doesn't seem to have this problem. Reply
  • ShapeGSX - Tuesday, June 06, 2006 - link

    Yeah, slam that AM2 CPU into your old Socket 939 board. It will work! AMD doesn't require you to buy a new motherboard to buy their latest and greatest!

    Conroe is a huge departure from the P4. The fact that it works at all in LGA775 and with old chipsets is impressive.
    Reply
  • phusg - Tuesday, June 06, 2006 - link

    Bol(*#*&s, digitalfreak is right, of course this is a scam. Just because AMD is now using the same scam doesn't mean this is the way it has to be. I'm sure it wouldn't cost too many transistors to build in a legacy mode on the CPU die. Reply
  • Spoelie - Tuesday, June 06, 2006 - link

    U guys are missing the point, the X2 dual core socket 939 cpu with TDP 89w works on the socket 939 motherboards that were available at launch 2 years ago, when .13µ newcastle cpus were the only game in town, barring any bios updates of course.

    Same thing for socket A, altho not at the right FSB speed depending on chipset.

    AMD only forces you to update if there is a significant feature difference that can't be worked out in the current socket. It seems that intel engineers its cpus without 'socket environment' consideration and then engineers a specific chipset for it, while amd engineers its cpus to fit in a specific socket environment that they defined a standard for long ago.
    Reply
  • ShapeGSX - Tuesday, June 06, 2006 - link

    So you don't think that lower power consumption due to the new VRM is a significant feature difference? It is all the technical press is talking about these days.

    The LGA775 socket was launched in June of 2004. So, here we are 2 years later with the same socket for Intel, but a change to the voltage regulator. And you can run dual core processors on what was originally a socket meant just for one core, just like AMD.

    Socket 939 was also launched 2 years ago, and it is already obsolete.

    Sounds like both companies have similar track records, as of late. Perhaps the march of technology these days simply will not allow for using the same motherboard for more than two years.
    Reply
  • JarredWalton - Tuesday, June 06, 2006 - link

    It could be that the VRM requirements are for lower voltages or cleaner power or something along those lines. Also, just because Conroe runs cooler than Presler doesn't mean it can't have more stringent voltage requirements. I wouldn't be surprised if this is less of a case of *can't* run Conroe but more can't run 100% *stably*. The newer 975X chipsets/motherboards will probably have a few slight tweaks to fix some erratta encountered with current 975X designs. Reply
  • giantpandaman2 - Tuesday, June 06, 2006 - link

    Conroe has new power states that aren't supported by older motherboards. For example, a Conroe would try to go to "sleep" and the motherboard wouldn't supply the right level of power to it. Reply
  • soydios - Monday, June 05, 2006 - link

    1 kilowatt power supply? bloody hell

    I like all the pictures. But I'm still waiting for Asus AM2 RD580.
    Reply
  • highlandsun - Monday, June 05, 2006 - link

    Any news on iRAM2 or anything similar? Reply

Log in

Don't have an account? Sign up now