Basic Features: Asus A8R32-MVP

 Asus A8R32-MVP Deluxe
CPU Interface Socket 939 Athlon 64
Chipset ATI RD580 Northbridge - ULi M1575 Southbridge
Bus Speeds 200 to 400MHz in 1MHz Increments
Memory Speeds DDR200,266,333,366,400 (433,466,500 with Rev. E AMD)
PCIe Speeds 100 to 150MHz in 1MHz Increments
PCI/AGP Fixed at 33/66
Core Voltage Auto, 0.8V to 1.4V-1.55V* in 0.025V increments
PLUS 0.1V & 0.2V with vCore Over-Voltage
(Maximum vCore 1.6V to 1.75V)
*Max Voltage depends on CPU ID. To 1.55V with Clawhammer
CPU Clock Multiplier 4x-25.5x in 0.5X increments
DRAM Voltage Auto, 2.6V to 3.2V in .05V increments
HyperTransport Frequency 1000MHz (1GHz)
(Stable in overclocking to 1500+ HT)
HyperTransport Multiplier Auto, 1X to 5X
Northbridge Over-Voltage Auto, Disabled, Enabled
Enabled adds 3 New Voltage Options Below
Core Voltage 1.2V, 1.3V, 1.4V, 1.5V
HyperTransport Bus Voltage 1.2V, 1.3V, 1.4V, 1.5V
PCI Express Voltage 1.2V, 1.3V, 1.4V, 1.5V
Southbridge Overvoltage Auto, Disabled, Enabled (+0.1V)
PEG Link Mode Auto, Disabled, Normal, Fast, Faster
PEG Buffer Length Auto, Short, Long, Longer, Longest
AI Overclocking Manual, Auto*, Standard*, Overclock Profile**, AI N.O.S.**
*CPU Frequency and Other OC Parameters Set Automatically
**Manually Set CPU Frequency and Other Parameters Auto Adjust
Overclock Profile Options OC 3%, 5%, 10%, 15%,20%,30%
AI N.O.S. Options OC 3%, 5%, 7%, 10%, 15%, 20%
Memory Slots Four 184-pin DDR DIMM Slots
Dual-Channel Configuration
Regular Unbuffered or ECC Memory to 4GB Total
Expansion Slots 2 PCIe x16
1 PCIe x1
3 PCI Slots
Onboard SATA/RAID 4 SATA2 Drives by ULi M1575
(RAID 0,1,1+0,5,JBOD)
PLUS 2 SATA2 Drives by Silicon Image 3132 (RAID 0,1)
Onboard IDE/IDE RAID Two Standard ATA133/100/66 (4 drives)
Onboard USB 2.0/IEEE-1394 8 USB 2.0 ports supported by ULi M1575
2 Firewire by TI 1394a
Onboard LAN PCIe Gigabit by Marvel Yukon 88E8053
PCI Gigabit by Marvel 88E8001
Onboard Audio Azalia HD Audio by Realtech ALC882 codec
BIOS Revision AMI 307 (2/15/06)

The BIOS adjustments of the A8R-MVP were a pleasant surprise for a low-end board, but they were not as extensive as those seen on top-end Asus boards like the 8-phase A8N32-SLI. The BIOS for the A8R32-MVP is very complete, and does not really have any Asus high-end adjustments missing at all. The available adjustment ranges have been improved over the available options on the A8R-MVP, and Asus has added more options for processor and chipset voltages.

As on the A8R-MVP, memory voltage can be adjusted from 2.5 to 3.2V - much wider than most boards and the equal of the Asus A8N32-SLI. The A8R32-MVP adds finer memory voltage adjustments, in 0.05V increments. Memory voltage does not extend to 4.0V as it does on the DFI, but the only memory requiring these high voltages is OCZ VX and Mushkin Redline, both of which have been discontinued.

On the A8R-MVP, the available vCore options depend on the CPU installed on the A8R32-MVP. Our test Athlon 64 has a default voltage of 1.35V and the A8R32-MVP provided adjustments to 1.45V. A Clawhammer provided adjustments to 1.55V.

There is an important addition, however, in the vCore overvoltage option. This can be set to Auto, disabled, 100mv, or 200mv. This means that you can add up to .2V to any vCore settings that you can select in the BIOS. The A8R-MVP had just Enabled or Disabled for vCore overvoltage. The value turned out to be about 0.1V. With the added 200mv option, vCore can be adjusted up to 1.65V on our Athlon 64 specified to run at 1.35V. You should be able to achieve similar results of a .25V to .3V vCore overvoltage with any Athlon 64 processor.

Voltage adjustments are one area where buyers asked for more, and Asus has added quite a few new voltage adjustments with broader ranges in the A8R32-MVP. Northbridge Core voltage can be adjusted from 1.2 to 1.5V, as can HTT voltage, and PCI Express voltage.

The A8R-MVP has a very wide range of memory timing adjustments in recent BIOS revisions. Asus has expanded beyond these in the A8R32-MVP Deluxe. While the A8R32-MVP still defaults to a 2T Command Rate at Auto for widest memory compatability - it is now very easy to force 1T, even at high speeds. Unlike the A8R-MVP, which required 2T above 260-265, the A8R32-MVP supports 1T Command Rate to well over 300 Clock Speed. This is the kind of performance enthusiasts want on this board.

The RD480-based Asus A8R-MVP has a very wide range of overclocking controls for a board in the $100 price range, but it is weak in voltage adjustments and memory Command Rate settings. The RD580-based A8R32MVP, for the most part, corrects those deficiencies by providing finer adjustments, a larger number of BIOS-adjustable voltages, and higher vCore settings. Most users will be pleased with the additions and refinements. The A8R32-MVP stands up well against just about any overclocking board available in terms of the available overclocking options and the range of control available. The Asus designers did an excellent job of listening to buyers of the earlier A8R-MVP and adding the most asked-for improvements.

Asus A8R32-MVP: Board Layout Overclocking: Asus A8R32-MVP
Comments Locked

65 Comments

View All Comments

  • Beenthere - Monday, February 20, 2006 - link

    No flames at Anandtech. Asus is the mfg. and the one responsible for delivering a proper vcore circuit design, using quality components, etc.

    Don't shoot the messenger for stating the facts. If Asus didn't have design and engineering problems their mobos wouldn't have these confirmed issues reported by numerous hardware review sites.
  • arswihart - Sunday, February 19, 2006 - link

    Do you have to use the same color RAM slots on ASUS boards for dual-channel, as shown in the pic in this review?
  • Shimmishim - Sunday, February 19, 2006 - link

    it's good to see you catch your mistakes from your previous reviews. i hope next time you'll take users comments/emails more seriously than just brushing it off simply as "others can do it..." other than that. this board looks great! its a shame all this good stuff is coming out 1/2 quarters before AM2 is being released.
  • godrod - Friday, February 17, 2006 - link

    I need to know on this board if you only have one video card (x1800XT) can you put it into the upper PCI-E slot closest to the CPU socket or does it have to go into the lower slot like the SD480 boards.
  • Wesley Fink - Friday, February 17, 2006 - link

    A single video card can go into either x16 PCIe slot. We tried both slots and it will work wekk in either.
  • arswihart - Sunday, February 19, 2006 - link

    this looks nice, I haven't moved from AGP yet, this may just make me do it
  • Beenthere - Friday, February 17, 2006 - link

    After Asus's false advertising of the A8R-MVP as being designed for "Serious Overclockers"; After Asus's failure to fix the long list of defects on the A8R-MVP which include 1T memory, Vcore instability, BIOS issues, etc.; After Asus's failure to acknowledge the known problems with the A8R-MVP; After Asus's refusal to even discuss the problems of the A8R-MVP with customers; After Asus's refusal to provide a proper BIOS upgrade to correct the defects in the A8R-MVP; After Asus's denial that the A8R-MVP mobo even existed after people bought it; After Asus's refusal to provide the same BIOS to consumers that they provided to Anandtech...

    there will never be another Asus product purchased by our company. Asus can stick their entire product line where the Sun don't shine. They've burned us for the last time. They may think they got away with defrauding consumers with the defective A8R-MVP mobos but they are in for one big surprise.
  • DanaGoyette - Sunday, February 19, 2006 - link

    Refusal to provide the same BIOS...
    Hey, that gives me an idea! I wonder if Anandtech still has their A8R-MBP -- if they do, they should make a bios backup and post it!
  • matthewfoley - Wednesday, March 1, 2006 - link

    If any of you read the article they offered anyone who emailed them a copy of the same bios that they used. If you really want it I can get it for you.
  • DanaGoyette - Sunday, March 5, 2006 - link

    Oh, I don't even have the board, but shouldn't it be easy to post the BIOS on the site rather than just through e-mail?

Log in

Don't have an account? Sign up now