The 7200.9 Series

On the outside, the 7200.9 drives look identical to the 7200.7 and 7200.8 series of desktop drives. On the inside, the 7200.8 line was the first to incorporate the highest density platters to date in their 400GB version drive at 133GB per platter. This puts Seagate ahead of Hitachi who released their 500GB DeskStar quite some time ago. The new 7200.9 line has incorporated a higher density 160GB platter into a few of its drives. The following screenshot shows the manufacturer's specifications for each 7200.9 drive according to capacity size.


Click to enlarge.

The 160GB platter has only gone into the 80GB drive, which uses a single side and single head, and the 160GB drive, which uses both sides of the platter with 2 heads. The 400GB model still uses its original three 133GB platter design that was implemented in the 7200.8, while the new 500GB drive uses four 125GB platters. Why not just use the 160GB platters for the 500GB drive? Doing the math, 3x160GB would bring us to 480GB, which is 20GB short of the 500GB mark, and 4x160GB comes out to 640GB, which cannot be marketed at 500GB without a 140GB waste in total capacity. It makes the most sense to use 4x125GB platters to bring us to a perfect 500GB total capacity. (Note that the drive's total capacity will be slightly lower in Windows, as 1GB is 1,073,741,824 bytes for Windows, but only 1,000,000,000 bytes in hard drive manufacturer specs.)


All of the SATA 2.5 Trimmings

A few months ago, we cleared up some confusion regarding the SATA naming conventions and what they mean. The confusion was with the SATA II name being used in unison with the 3.0Gb/sec transfer rate. SATA II was actually the name of the SATA standards organization, which decides the specifications for each SATA version. (They've since changed names to SATA-IO.) At the time, many thought that the 3.0GB/sec came standard in all drives labeled as SATA II. In fact, transfer rate along with other options such as hot plug, hot swap, and NCQ are options that drive manufacturers can implement in their products if they choose. You can even get most of the "SATA II" features in "SATA I" drives.

Seagate states that it has incorporated all of the features that SATA has to offer in the 7200.9 series including the following:
  • Hot Plug
  • Hot Swap
  • ClickConnect
  • Native Command Queuing (NCQ)
  • Staggered Spin-Up
  • 3G (3.0Gb/sec, backwards compatible with 1.5Gb/sec hardware) maximum transfer rates
The features listed above are only a start to what SATA should bring to the table. The SATA-IO group is continually working on updates to their specifications and we hope to see transfer rates and error checking features mutate into something extremely valuable to desktop and enterprise users alike.

In 2004, 20% of hard disk drives shipped were SATA based - about 41 million, according to Seagate Market Research. It is estimated that this year, the percentage will increase to 80% of shipped drives being SATA based, 40% of which will be Seagate drives. Meanwhile, PATA is being phased out and nearly all production will cease by the end of 2006.


Other Characteristics

Seagate reports that all of the drives in the 7200.9 line will feature an operating shock tolerance of about 63Gs and a non-operating shock of 350Gs, making them extremely rugged. Almost all but Hitachi's 7K500 drive can handle this much non-operating shock, but shock tolerance during normal operation is not as forgiving, with many drives only allowing about 55Gs. Not that we would recommend dropping your drives or computer, but accidents happen...


Click to enlarge.

Seagate is also reporting a lower sound rating between 2.5-2.8 bels while the drives are idle, and about 2.8-3.2 bels while the drives are seeking for data. According to Seagate, the lowest amount of sound audible by human ears is about 2.6 bels, so the idle noise output is borderline inaudible to our ears. Combine this with the hum of case and heat sink fans, and the hard drive is basically silent.


Click to enlarge.

In the next few weeks we will be looking at the performance of the 500GB 16MB SATA model of the 7200.9. We'll put it through our usual synthetic, simulated, and real world tests, and we'll compare it not only to the 400GB 7200.8, but also to some older drives like the 120GB 7200.7 as well as Maxtor's and Hitachi's higher capacity drives.

Index Seagate’s Upcoming Offerings
POST A COMMENT

72 Comments

View All Comments

  • PuravSanghani - Monday, October 10, 2005 - link

    Samsung and Microsoft are actually working on a Hybrid notebook drive which uses OneNAND flash memory currently manufacturered by Samsung itself. The drive, which is still in the development stage, is said to reduce battery use among the speed increases. Google "samsung hybrid" and you shall see.

    Thanks,

    Purav Sanghani
    Reply
  • semo - Monday, October 10, 2005 - link

    no, thank you.

    semo
    Reply
  • Spacecomber - Monday, October 10, 2005 - link

    I guess I was expecting something more in an Anandtech article than what apparently is just a summary of a press briefing.

    Maybe this article needs to have a title that clearly designates it for what it is.
    Reply
  • cryptonomicon - Tuesday, October 11, 2005 - link

    They should add some sort of suffix to all reviews that are really product briefings that just lets you know immediatly that it is mainly MFG information. Reply
  • JNo - Monday, October 10, 2005 - link

    I appreciate that this is manufacturer info rather than independent review but I for one would prefer to know that such a drive is just around the corner and be able to wait rather than shell out for a 7800.8 drive and regret the timing of the purchase. Don't worry, I'll take the manufacturer info & stats with a grain of salt... I can handle it... Reply
  • ss284 - Monday, October 10, 2005 - link

    Agreed. The article states:

    "In the next few weeks we will be looking at the performance of the 500GB 16MB SATA model of the 7200.9. We'll put it through our usual synthetic, simulated, and real world tests, and we'll compare it not only to the 400GB 7200.8, but also to some older drives like the 120GB 7200.8 as well as Maxtor's and Hitachi's higher capacity drives."

    Why didnt they release this article after they did this testing? Obviously they have this drive in their hands already, and theres no NDA. This article should be a flash advertisement on the side of the page instead of a full fledged article.
    Reply
  • JarredWalton - Monday, October 10, 2005 - link

    "Introducing Seagate's 7200.9: The New Generation"

    Introducing at least to me implies that it's not a review. We (Purav) have the parts on order and will be testing ASAP. The NDA lifted today, and we did not have product in house beforehand. To me, at least - since I've bought quite a few Seagate drives in the past year - the new lineup is important enough to warrant an article of its own.
    Reply
  • bhtooefr - Monday, October 10, 2005 - link

    If 4 133GB platters give 532GB, then why not use 4 160GB platters, and get 640GB, and leapfrog Hitachi?

    You can use four platters.

    You have 160GB platters.

    Why not do it, and say you've got 600GB before Hitachi?
    Reply
  • coldpower27 - Tuesday, October 11, 2005 - link


    I think Seagate is comfortable, in thier position of tied for first place, we will probably see a Hitachi 600GB based on the 5 platter design again of 120GB Before we see Seagate match that with a 4x150GB design. Also the other Drive manufacturers need to catch up to this level, namely Wester Digital and Maxtor.
    Reply
  • Calin - Tuesday, October 11, 2005 - link

    They are now the king of the size, and they will wait until Hitachi launch something bigger until they will launch the 640GB drive.
    Calin
    Reply

Log in

Don't have an account? Sign up now