HDTV Wonder - The Card

The card that we received was technically a non-qualified sample, but since we are testing function capability and features rather than performance, this really isn't an issue. Like the past TV Wonder products, there is no MPEG2 decoder on this card, which is one of the reasons why it can't be used with software like SageTV 2.0.



Click to enlarge.


ATI chose to use the Philips TUV1236D HDTV compliant tuner on their HDTV Wonder. Philips uses an ATI NXT2004 demodulator on all TUV1236D tuners, which serves to convert the DTV's 8VSB modulation transmissions to digital MPEG2 data. The NXT2004, as shown in the picture below, is actually on the back side of the tuner, and cannot be accessed without probably damaging the tuner. Note that the HDTV Wonder supports all ATSC supported DTV resolutions, not just the HDTV ones.

If you don't remember, sometime in the last half of 2002, ATI acquired the NextWave company as part of their move to get more into the multimedia arena, as NextWave was already producing demodulators.



Click to enlarge.


Since analog TV signals will still be around for some time, ATI has wisely decided to continue support for this standard. The HDTV wonder comes with one RF connector for DTV (the one on the right in the picture) and one for a cable/antenna hookup (left RF connector). Like the TV Wonder Pro, the HDTV Wonder supports audio/video in (composite and s-video) via their "love it or hate it" purple breakout box (included).

ATI already knows that you must be asking about a DTV All-in-Wonder possibility (as we were), and they have prepared a response in their HDTV Wonder's FAQ:
...One of the most obvious reasons involves size: the HDTV tuner solution is significantly larger than the current tuner on an All-in-Wonder board. Attempting to make such a large tuner fit on an All-in-Wonder board would result in sacrificing some of the All-in-Wonder's great feature set and performance. Another reason for separating the HDTV tuner from the graphics processor is to maintain signal integrity of the digital signal. Connecting the tuner to the demodulator is a sensitive matter that is easily impacted by electrical noise...
Does this mean that with the full analog to DTV switch, All-in-Wonders will become extinct? Not likely; AIWs are still a good bread-and-butter source for ATI's multimedia team. With ATI's progression in their developments within the graphics and multimedia field, it is likely that both of these hurdles will be overcome in the future, and the full switch will be far from complete, which means that ATI still has quite a bit of time to figure things out.



Click to enlarge.


The Test DTV Player – DTV Time-shifted
Comments Locked

27 Comments

View All Comments

  • oupei - Tuesday, June 22, 2004 - link

    output goes to you video card, many of which have DVI. dunno of any that have component video though...
  • devonz - Tuesday, June 22, 2004 - link

    Why am I limited to watching my HDTV signals on my monitor instead of my nice big HDTV television? In other words, why no component output cable, or DVI? Just a thought :) -Devon
  • lebe0024 - Tuesday, June 22, 2004 - link

    "With HDTV slowing becoming the standard"

    Do you guys READ the stuff you write? It's the first sentence for crying out loud.
  • skunkbuster - Tuesday, June 22, 2004 - link

    it looks kind of basic/generic for something that costs $200...
  • Aquila76 - Tuesday, June 22, 2004 - link

    Great, $200 more to spend when I build my new PC in a couple months!
  • johnsonx - Tuesday, June 22, 2004 - link

    What's ATI's position on combining an HDTV Wonder with an existing All-in-Wonder 9600/9700/9800 card? Specifically, what level of 2-tuner and PiP support will be available? Will using both together be kludgy or seamless?

    Those who have AIW based HTPC's will be eager to know this.
  • Doormat - Tuesday, June 22, 2004 - link

    Sad this card doesnt support QAM, my cable co puts out local HD channels in the clear. Then there is the new CableCard standard.

    Of course, if it had a firewire port and appropriate software, I could hook it up to my HD set and record software!

Log in

Don't have an account? Sign up now